Add support of iWRAP5

- mouse virtical wheel
- consumer page

1 files changed, 0 insertions, 376 deletions

diff --git a/protocol/iwrap/iWRAP.txt b/protocol/iwrap/iWRAP.txt
deleted file mode 100644
index 2a062d9d98..0000000000
--- a/protocol/iwrap/iWRAP.txt
+++ /dev/null
@@ -1,376 +0,0 @@
-Bulegiga WT12
-=============
-WT12 is a bluetooth module from Bluegiga. http://www.bluegiga.com/
-
-iWRAP
-    higher layer interface for bluetooth firmware
-    communicate with UART
-
-iWRAP HID
-default setting
-    115200  8bit/n/1/n
-
-
-TODO
-----
-KiCAD circuit/PCB design
-power saving
-    AVR sleep(15ms by watch dog timer)
-    WT12 sleep
-    measuring current consumption
-    measuring battery life of normal usage/idle/intensive usage
-software reset/bootloarder
-LED indicator(chaging/paring/connecting)
-license confirmation of suart.c
-consumer page is not working
-authenticate method/SSP
-SPP keyboard support
-SPP debug console support
-mouse wheel feature request to Bluegiga
-
-
-Problems
---------
-power consumption
-no consumer page support(bug?)
-no mouse wheel support
-no paring management
-no interactive auth method
-
-
-UART hardware flow control
---------------------------
-(iWRAP4 User Guide 9.5)
-Hardware flow control is enabled by default and it should not be disabled unless mandatory, because without the hardware flow control the data transmission may not be reliable.
-If the hardware flow control is enabled from PS-keys, but no flow control is used, the following steps should be implemented in the hardware design:
-- CTS pin must be grounded
-- RTS pin must be left floating
-
-
-Power Saving
-------------
-power consume
-    without opimization: 4hr to shutdown(310mAh)
-    2011/08/25: 9hr(310mAh) SNIFF MASTER sleep/WDTO_120MS
-
-measure current consumption
-    HHKB keyswitch matrix board
-        idle
-        scanning
-    Bluegiga WT12 module
-        SLEEP command
-        deep sleep on/off in config bits
-
-HHKB keyswich
-    how to power off
-        I/O pin configuration when sleeping
-        FET switch for 5V regulator
-
-Bluetooth module
-    power off when in USB mode
-    power off by FET switch
-
-AVR configuration
-    unused pins
-    ADC
-    
-
-
-SET CONTROL CONFIG
-------------------
-    SET CONTROL CONFIG 4810
-    SET CONTROL CONFIG LIST
-    SET CONTROL CONFIG 0000 0000 4910 DEEP_SLEEP KLUDGE INTERACTIVE_PIN UART_LATENCY
-
-    Bit14   UART low latency
-    Bit11   Interactive pairing mode
-    Bit04   Deep sleep
-
-
-Reconnection
-------------
-SET CONTROL AUTOCALL 1124 5000 HID
-    1124    HID service class
-    5000    interval ms
-
-HID profile
------------
-This is needed to configure only once.
-    SET PROFILE HID ON
-    RESET
-
-HID class
----------
-    SET BT CLASS 005C0  // keyboard/mouse combined devie
-
-Pairing Security
-----------------
-Secure Simple Pairing(SSP)
-    SET BT SSP 2 0  // Enables SSP for keyboard and Man-in-the-middle protection
-    SET BT SSP 3 0  // Enables SSP just works mode
-
-for keyboard with SSP
-    SET BT AUTH * 0000
-    SET BT SSP 2 0
-    SET CONTROL CONFIG 800
-    RESET
-
-for keyboard without SSP
-    SET BT AUTH * 0000
-    SET CONTROL CONFIG 800
-    RESET
-
-AUTH
-    AUTH xx:xx:xx:xx:xx:xx?         // Pairing request event
-    AUTH xx:xx:xx:xx:xx:xx  0000
-
-    SSP PASSKEY 78:dd:08:b7:e4:a2 ?
-    SSP PASSKEY 78:dd:08:b7:e4:a2 xxxxx
-    (SSP COMPLETE 78:dd:08:b7:e4:a2 HCI_ERROR_AUTH_FAIL     // failed)
-    RING 0 78:dd:08:b7:e4:a2 11 HID
-
-Connecton
-    RING xx:xx:xx:xx:xx:xx xx HID   // connection event
-
-    KILL xx:xx:xx:xx:xx:xx
-
-Mode
-----
-Command mode
-Data mode
-    Raw mode
-    (Simple mode         not for a real keyboard)
-
-Raw mode
-    Keyboard:
-    0x9f, length(10), 0xa1, 0x01, mods, 0x00, key1, key2, key3, key4, key5, key6
-
-    Mouse:
-    0x9f, length(5), 0xa1, 0x02, buttons, X, Y
-
-    Consumer page:
-    0x9f, length(5), 0xa1, 0x03, bitfield1, bitfield2, bitfield3
-
-    consumer page suage
-    Bitfield 1:
-        0x01 Volume Increment
-        0x02 Volume Decrement
-        0x04 Mute
-        0x08 Play/Pause
-        0x10 Scan Next Track
-        0x20 Scan Previous Track
-        0x40 Stop
-        0x80 Eject
-    Bitfield 2:
-        0x01 Email Reader
-        0x02 Application Control Search
-        0x04 AC Bookmarks
-        0x08 AC Home
-        0x10 AC Back
-        0x20 AC Forward
-        0x40 AC Stop
-        0x80 AC Refresh
-    Bitfield 3:
-        0x01 Application Launch Generic Consumer Control
-        0x02 AL Internet Browser
-        0x04 AL Calculator
-        0x08 AL Terminal Lock / Screensaver
-        0x10 AL Local Machine Browser
-        0x20 AC Minimize
-        0x40 Record
-        0x80 Rewind
-
-
-
-
-
-2011/07/13
-set
-SET BT BDADDR 00:07:80:47:22:14
-SET BT NAME HHKB pro BT
-SET BT CLASS 0005c0
-SET BT AUTH * 0000
-SET BT IDENT BT:47 f000 4.1.0 Bluegiga iWRAP
-SET BT LAP 9e8b33
-SET BT PAGEMODE 4 2000 1
-SET BT PAIR 78:dd:08:b7:e4:a2 a191189cd7e51030ad6a07848ce879bb
-SET BT POWER 3 3 3
-SET BT ROLE 0 f 7d00
-SET BT SNIFF 0 20 1 8
-SET BT SSP 2 1
-SET BT MTU 667
-SET CONTROL AUTOCALL 1124 3000 HID
-SET CONTROL BAUD 38400,8n1
-SET CONTROL CD 00 0
-SET CONTROL ECHO 7
-SET CONTROL ESCAPE 43 00 1
-SET CONTROL GAIN 0 5
-SET CONTROL INIT SET CONTROL MUX 0
-SET CONTROL MSC DTE 00 00 00 00 00 00
-SET CONTROL MUX 1
-SET CONTROL PIO 00 00
-SET CONTROL READY 00
-SET PROFILE HID f HID
-SET
-
-info config
-
-!!! THIS IS BETA RELEASE AND MAY BE USED FOR EVALUATION PURPOSES ONLY !!!
-
-WRAP THOR AI (4.1.0 build 435)
-Copyright (c) 2003-2011 Bluegiga Technologies Inc.
-Compiled on Jun 28 2011 17:19:51, running on WT12-A module, psr v31
-        AVRCP BGIO FTP HFP HFP_AG HID HID_CONSUMER_PAGE HSP LEDS MAP OTA PBAP PIO=0x00fc SSP SUBRATE TEST VOLUME
-        - BOCK3 version 435 (Jun 28 2011 17:19:37) (max acl/sco 7/1)
-        - Bluetooth version 2.1, Power class 2
-        - Loader 4279, firmware 6297 (56-bit encryption), native execution mode
-        - up 0 days, 06:23, 2 connections (pool 2)
-        - User configuration:
-&028a = 0001 0000 0000 0011 0024 0000 0000 0010 0000 0080 0000 0000 0080 005f 009b 0034 00fb 0006
-&028b = 0000 0bb8
-&028d = 0001
-&0295 = 0000 0005 000b 0000 0003 0000 0000 0000 0000 0000 0000
-&0298 = a006
-&0299 = 0000 0000
-&02a3 = 0030 0030 0030 0030
-&02a4 = 009d 0000
-&02a5 = 0053 0045 0054 0020 0043 004f 004e 0054 0052 004f 004c 0020 004d 0055 0058 0020 0030
-&02a7 = 0000 05c0
-&02a8 = 4910 0000 0000
-&02aa = 0004 2000 0001 0033 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
-&02ac = 0000 0000 002b 0000 0000 0000 0000 0000 0000 0000 0002 0000 0000 0000 0010 0000 0000 0000 0000 029b 0000 0000 0000 0000
-&02ad = 4848 424b 7020 6f72 4220 0054
-&02b3 = 0005 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003
-&02b7 = 000f 4948 0044
-&02bb = 8000
-READY.
-
-
-
-
-2011/07/07 settings:
-set
-SET BT BDADDR 00:07:80:47:22:14
-SET BT NAME HHKB Pro BT
-SET BT CLASS 0005c0
-SET BT AUTH * 000
-SET BT IDENT BT:47 f000 4.0.0 Bluegiga iWRAP
-SET BT LAP 9e8b33
-SET BT PAGEMODE 4 2000 1
-SET BT PAIR 78:dd:08:b7:e4:a2 9e54d0aabb1b4d73cfccddb1ea4ef2d6
-SET BT POWER 3 3 3
-SET BT ROLE 0 f 7d00
-SET BT SNIFF 0 20 1 8
-SET BT SSP 3 0
-SET BT MTU 667
-SET CONTROL BAUD 38400,8n1
-SET CONTROL CD 00 0
-SET CONTROL ECHO 7
-SET CONTROL ESCAPE 255 00 1
-SET CONTROL GAIN 0 5
-SET CONTROL INIT set control mux 0
-SET CONTROL MSC DTE 00 00 00 00 00 00
-SET CONTROL PREAMP 1 1
-SET CONTROL READY 00
-SET PROFILE HID HID
-SET PROFILE SPP Bluetooth Serial Port
-SET
-
-info config
-WRAP THOR AI (4.0.0 build 317)
-Copyright (c) 2003-2010 Bluegiga Technologies Inc.
-Compiled on Apr 20 2010 16:44:28, running on WT12-A module, psr v31
-        AVRCP FTP PBAP PIO=0x00fc SSP SUBRATE VOLUME
-        - BOCK3 version 317 (Apr 20 2010 16:44:21) (max acl/sco 7/1)
-        - Bluetooth version 2.1, Power class 2
-        - Loader 4279, firmware 6297 (56-bit encryption), native execution mode
-        - up 0 days, 00:00, 0 connections (pool 1)
-        - User configuration:
-&028c = 0001 0020 0000 0001 0008 0000
-&028d = 0000
-&0296 = 0047 0001 f000 0400 6c42 6575 6967 6167 6920 5257 5041
-&0298 = c006
-&02a3 = 0030 0030 0030
-&02a4 = 009d 0000
-&02a5 = 0073 0065 0074 0020 0063 006f 006e 0074 0072 006f 006c 0020 006d 0075 0078 0020 0030
-&02a7 = 0000 05c0
-&02a8 = 0800 0000 0000
-&02ac = 0000 0000 00ff 0000 0000 0000 0000 0000 0000 0000 0002 0000 0000 0000 0010 0000 0000 0000 0000 029b 0000 0000 0000 0000
-&02ad = 4848 424b 5020 6f72 4220 0054
-&02b3 = 0004 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003
-&02b7 = 0000
-&02bb = 6c42 6575 6f74 746f 2068 6553 6972 6c61 5020 726f 0074
-READY.
-
-
-
-2011/08/23:
-SET BT BDADDR 00:07:80:47:22:14
-SET BT NAME HHKB pro BT
-SET BT CLASS 0005c0
-SET BT AUTH * 0000
-SET BT IDENT BT:47 f000 4.1.0 Bluegiga iWRAP
-SET BT LAP 9e8b33
-SET BT PAGEMODE 4 2000 1
-SET BT PAIRCOUNT 4
-SET BT POWER 3 3 3
-SET BT ROLE 1 f 12c0
-SET BT SNIFF 10 2 1 8
-SET BT SSP 3 0
-SET BT MTU 667
-SET CONTROL BAUD 38400,8n1
-SET CONTROL CD 00 0
-SET CONTROL ECHO 7
-SET CONTROL ESCAPE 43 00 1
-SET CONTROL GAIN 0 5
-SET CONTROL INIT SET CONTROL MUX 0
-SET CONTROL MSC DTE 00 00 00 00 00 00
-SET CONTROL MUX 1
-SET CONTROL PIO 00 00
-SET CONTROL READY 00
-SET PROFILE HID 7 HIDKeyboardMouse
-SET
-
-SET CONTROL CONFIG 0000 0004 481e CLOCK_CACHE INTERLACED_INQ INTERLACED_PAGE DEEP_SLEEP INTERACTIVE_PIN UART_LATENCY 23D_NOKLUDGE
-
-
-
-2011/08/25:
-SET BT BDADDR 00:07:80:47:22:14
-SET BT NAME HHKB pro BT
-SET BT CLASS 0005c0
-
-SET BT IDENT BT:47 f000 4.1.0 Bluegiga iWRAP
-SET BT LAP 9e8b33
-SET BT PAGEMODE 4 2000 1
-SET BT PAIRCOUNT 4
-SET BT PAIR 78:dd:08:b7:e4:a2 0be83335a03fed8ededae42e99554e28
-SET BT POWER 3 3 3
-SET BT ROLE 1 f 12c0
-SET BT SNIFF 100 20 1 8
-SET BT SSP 3 0
-SET BT MTU 667
-SET CONTROL BAUD 38400,8n1
-SET CONTROL CD 00 0
-SET CONTROL ECHO 7
-SET CONTROL ESCAPE - 20 1
-SET CONTROL GAIN 0 5
-SET CONTROL INIT SET CONTROL MUX 0
-SET CONTROL MSC DTE 00 00 00 00 00 00
-SET CONTROL MUX 1
-SET CONTROL PIO 00 00
-SET CONTROL READY 00
-SET PROFILE HID f HIDKeyboardMouse
-SET
-
-
-SET CONTROL CONFIG 0000 0000 490e CLOCK_CACHE INTERLACED_INQ INTERLACED_PAGE KLUDGE INTERACTIVE_PIN UART_LATENCY
-
-
-2011/09/08:
-SET CONTROL CONFIG 0000 0000 410e CLOCK_CACHE INTERLACED_INQ INTERLACED_PAGE KLUDGE UART_LATENCY
-
-    Removed INTERACTIVE_PIN to avoid interactive auth and use SET BT AUTH pin(0000).
-
-
-EOF