Relocate platform specific drivers (#13894)

* Relocate platform specific drivers

* Move stm eeprom

* Tidy up slightly

1 files changed, 159 insertions, 0 deletions

diff --git a/platforms/chibios/drivers/ws2812_spi.c b/platforms/chibios/drivers/ws2812_spi.c
new file mode 100644
index 0000000000..377a929b94
--- /dev/null
+++ b/platforms/chibios/drivers/ws2812_spi.c
@@ -0,0 +1,159 @@
+#include "quantum.h"
+#include "ws2812.h"
+
+/* Adapted from https://github.com/gamazeps/ws2812b-chibios-SPIDMA/ */
+
+#ifdef RGBW
+#    error "RGBW not supported"
+#endif
+
+// Define the spi your LEDs are plugged to here
+#ifndef WS2812_SPI
+#    define WS2812_SPI SPID1
+#endif
+
+#ifndef WS2812_SPI_MOSI_PAL_MODE
+#    define WS2812_SPI_MOSI_PAL_MODE 5
+#endif
+
+#ifndef WS2812_SPI_SCK_PAL_MODE
+#    define WS2812_SPI_SCK_PAL_MODE 5
+#endif
+
+// Push Pull or Open Drain Configuration
+// Default Push Pull
+#ifndef WS2812_EXTERNAL_PULLUP
+#    if defined(USE_GPIOV1)
+#        define WS2812_MOSI_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL
+#    else
+#        define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL
+#    endif
+#else
+#    if defined(USE_GPIOV1)
+#        define WS2812_MOSI_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
+#    else
+#        define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN
+#    endif
+#endif
+
+// Define SPI config speed
+// baudrate should target 3.2MHz
+// F072 fpclk = 48MHz
+// 48/16 = 3Mhz
+#if WS2812_SPI_DIVISOR == 2
+#    define WS2812_SPI_DIVISOR (0)
+#elif WS2812_SPI_DIVISOR == 4
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_0)
+#elif WS2812_SPI_DIVISOR == 8
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_1)
+#elif WS2812_SPI_DIVISOR == 16  // same as default
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_1 | SPI_CR1_BR_0)
+#elif WS2812_SPI_DIVISOR == 32
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_2)
+#elif WS2812_SPI_DIVISOR == 64
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_0)
+#elif WS2812_SPI_DIVISOR == 128
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_1)
+#elif WS2812_SPI_DIVISOR == 256
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0)
+#else
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_1 | SPI_CR1_BR_0)  // default
+#endif
+
+// Use SPI circular buffer
+#ifdef WS2812_SPI_USE_CIRCULAR_BUFFER
+#    define WS2812_SPI_BUFFER_MODE 1  // circular buffer
+#else
+#    define WS2812_SPI_BUFFER_MODE 0  // normal buffer
+#endif
+
+#if defined(USE_GPIOV1)
+#    define WS2812_SCK_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL
+#else
+#    define WS2812_SCK_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_SCK_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL
+#endif
+
+#define BYTES_FOR_LED_BYTE 4
+#define NB_COLORS 3
+#define BYTES_FOR_LED (BYTES_FOR_LED_BYTE * NB_COLORS)
+#define DATA_SIZE (BYTES_FOR_LED * RGBLED_NUM)
+#define RESET_SIZE (1000 * WS2812_TRST_US / (2 * 1250))
+#define PREAMBLE_SIZE 4
+
+static uint8_t txbuf[PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE] = {0};
+
+/*
+ * As the trick here is to use the SPI to send a huge pattern of 0 and 1 to
+ * the ws2812b protocol, we use this helper function to translate bytes into
+ * 0s and 1s for the LED (with the appropriate timing).
+ */
+static uint8_t get_protocol_eq(uint8_t data, int pos) {
+    uint8_t eq = 0;
+    if (data & (1 << (2 * (3 - pos))))
+        eq = 0b1110;
+    else
+        eq = 0b1000;
+    if (data & (2 << (2 * (3 - pos))))
+        eq += 0b11100000;
+    else
+        eq += 0b10000000;
+    return eq;
+}
+
+static void set_led_color_rgb(LED_TYPE color, int pos) {
+    uint8_t* tx_start = &txbuf[PREAMBLE_SIZE];
+
+#if (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_GRB)
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + j] = get_protocol_eq(color.g, j);
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.r, j);
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.b, j);
+#elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_RGB)
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + j] = get_protocol_eq(color.r, j);
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.g, j);
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.b, j);
+#elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_BGR)
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + j] = get_protocol_eq(color.b, j);
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.g, j);
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.r, j);
+#endif
+}
+
+void ws2812_init(void) {
+    palSetLineMode(RGB_DI_PIN, WS2812_MOSI_OUTPUT_MODE);
+
+#ifdef WS2812_SPI_SCK_PIN
+    palSetLineMode(WS2812_SPI_SCK_PIN, WS2812_SCK_OUTPUT_MODE);
+#endif  // WS2812_SPI_SCK_PIN
+
+    // TODO: more dynamic baudrate
+    static const SPIConfig spicfg = {WS2812_SPI_BUFFER_MODE, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN), WS2812_SPI_DIVISOR};
+
+    spiAcquireBus(&WS2812_SPI);     /* Acquire ownership of the bus.    */
+    spiStart(&WS2812_SPI, &spicfg); /* Setup transfer parameters.       */
+    spiSelect(&WS2812_SPI);         /* Slave Select assertion.          */
+#ifdef WS2812_SPI_USE_CIRCULAR_BUFFER
+    spiStartSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf);
+#endif
+}
+
+void ws2812_setleds(LED_TYPE* ledarray, uint16_t leds) {
+    static bool s_init = false;
+    if (!s_init) {
+        ws2812_init();
+        s_init = true;
+    }
+
+    for (uint8_t i = 0; i < leds; i++) {
+        set_led_color_rgb(ledarray[i], i);
+    }
+
+    // Send async - each led takes ~0.03ms, 50 leds ~1.5ms, animations flushing faster than send will cause issues.
+    // Instead spiSend can be used to send synchronously (or the thread logic can be added back).
+#ifndef WS2812_SPI_USE_CIRCULAR_BUFFER
+#    ifdef WS2812_SPI_SYNC
+    spiSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf);
+#    else
+    spiStartSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf);
+#    endif
+#endif
+}