Move Audio drivers from quantum to platform drivers folder (#14308)

* Move Audio drivers from quantum to platform drivers folder

* fix path for audio drivers

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>

1 files changed, 126 insertions, 0 deletions

diff --git a/platforms/chibios/drivers/audio_dac.h b/platforms/chibios/drivers/audio_dac.h
new file mode 100644
index 0000000000..07cd622ead
--- /dev/null
+++ b/platforms/chibios/drivers/audio_dac.h
@@ -0,0 +1,126 @@
+/* Copyright 2019 Jack Humbert
+ * Copyright 2020 JohSchneider
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#ifndef A4
+#    define A4 PAL_LINE(GPIOA, 4)
+#endif
+#ifndef A5
+#    define A5 PAL_LINE(GPIOA, 5)
+#endif
+
+/**
+ * Size of the dac_buffer arrays. All must be the same size.
+ */
+#define AUDIO_DAC_BUFFER_SIZE 256U
+
+/**
+ * Highest value allowed sample value.
+
+ * since the DAC is limited to 12 bit, the absolute max is 0xfff = 4095U;
+ * lower values adjust the peak-voltage aka volume down.
+ * adjusting this value has only an effect on a sample-buffer whose values are
+ * are NOT pregenerated - see square-wave
+ */
+#ifndef AUDIO_DAC_SAMPLE_MAX
+#    define AUDIO_DAC_SAMPLE_MAX 4095U
+#endif
+
+#if !defined(AUDIO_DAC_SAMPLE_RATE) && !defined(AUDIO_MAX_SIMULTANEOUS_TONES) && !defined(AUDIO_DAC_QUALITY_VERY_LOW) && !defined(AUDIO_DAC_QUALITY_LOW) && !defined(AUDIO_DAC_QUALITY_HIGH) && !defined(AUDIO_DAC_QUALITY_VERY_HIGH)
+#    define AUDIO_DAC_QUALITY_SANE_MINIMUM
+#endif
+
+/**
+ * These presets allow you to quickly switch between quality settings for
+ * the DAC. The sample rate and maximum number of simultaneous tones roughly
+ * has an inverse relationship - slightly higher sample rates may be possible.
+ *
+ * NOTE: a high sample-rate results in a higher cpu-load, which might lead to
+ *       (audible) discontinuities and/or starve other processes of cpu-time
+ *       (like RGB-led back-lighting, ...)
+ */
+#ifdef AUDIO_DAC_QUALITY_VERY_LOW
+#    define AUDIO_DAC_SAMPLE_RATE 11025U
+#    define AUDIO_MAX_SIMULTANEOUS_TONES 8
+#endif
+
+#ifdef AUDIO_DAC_QUALITY_LOW
+#    define AUDIO_DAC_SAMPLE_RATE 22050U
+#    define AUDIO_MAX_SIMULTANEOUS_TONES 4
+#endif
+
+#ifdef AUDIO_DAC_QUALITY_HIGH
+#    define AUDIO_DAC_SAMPLE_RATE 44100U
+#    define AUDIO_MAX_SIMULTANEOUS_TONES 2
+#endif
+
+#ifdef AUDIO_DAC_QUALITY_VERY_HIGH
+#    define AUDIO_DAC_SAMPLE_RATE 88200U
+#    define AUDIO_MAX_SIMULTANEOUS_TONES 1
+#endif
+
+#ifdef AUDIO_DAC_QUALITY_SANE_MINIMUM
+/* a sane-minimum config: with a trade-off between cpu-load and tone-range
+ *
+ * the (currently) highest defined note is NOTE_B8 with 7902Hz; if we now
+ * aim for an even even multiple of the buffer-size, we end up with:
+ * ( roundUptoPow2(highest note / AUDIO_DAC_BUFFER_SIZE) * nyquist-rate * AUDIO_DAC_BUFFER_SIZE)
+ *                              7902/256 = 30.867        *       2      * 256 ~= 16384
+ * which works out (but the 'scope shows some sampling artifacts with lower harmonics :-P)
+ */
+#    define AUDIO_DAC_SAMPLE_RATE 16384U
+#    define AUDIO_MAX_SIMULTANEOUS_TONES 8
+#endif
+
+/**
+ * Effective bit-rate of the DAC. 44.1khz is the standard for most audio - any
+ * lower will sacrifice perceptible audio quality. Any higher will limit the
+ * number of simultaneous tones. In most situations, a tenth (1/10) of the
+ * sample rate is where notes become unbearable.
+ */
+#ifndef AUDIO_DAC_SAMPLE_RATE
+#    define AUDIO_DAC_SAMPLE_RATE 44100U
+#endif
+
+/**
+ * The number of tones that can be played simultaneously. If too high a value
+ * is used here, the keyboard will freeze and glitch-out when that many tones
+ * are being played.
+ */
+#ifndef AUDIO_MAX_SIMULTANEOUS_TONES
+#    define AUDIO_MAX_SIMULTANEOUS_TONES 2
+#endif
+
+/**
+ * The default value of the DAC when not playing anything. Certain hardware
+ * setups may require a high (AUDIO_DAC_SAMPLE_MAX) or low (0) value here.
+ * Since multiple added sine waves tend to oscillate around the midpoint,
+ * and possibly never/rarely reach either 0 of MAX, 1/2 MAX can be a
+ * reasonable default value.
+ */
+#ifndef AUDIO_DAC_OFF_VALUE
+#    define AUDIO_DAC_OFF_VALUE AUDIO_DAC_SAMPLE_MAX / 2
+#endif
+
+#if AUDIO_DAC_OFF_VALUE > AUDIO_DAC_SAMPLE_MAX
+#    error "AUDIO_DAC: OFF_VALUE may not be larger than SAMPLE_MAX"
+#endif
+
+/**
+ *user overridable sample generation/processing
+ */
+uint16_t dac_value_generate(void);