Update GPIO macro usages in core (#23093)

5 files changed, 28 insertions, 28 deletions

diff --git a/platforms/avr/drivers/audio_pwm_hardware.c b/platforms/avr/drivers/audio_pwm_hardware.c
index 6799cf2fdd..d484fba00f 100644
--- a/platforms/avr/drivers/audio_pwm_hardware.c
+++ b/platforms/avr/drivers/audio_pwm_hardware.c
@@ -216,12 +216,12 @@ void channel_2_stop(void) {
 void audio_driver_initialize(void) {
 #ifdef AUDIO1_PIN_SET
     channel_1_stop();
-    setPinOutput(AUDIO1_PIN);
+    gpio_set_pin_output(AUDIO1_PIN);
 #endif
 
 #ifdef AUDIO2_PIN_SET
     channel_2_stop();
-    setPinOutput(AUDIO2_PIN);
+    gpio_set_pin_output(AUDIO2_PIN);
 #endif
 
     // TCCR3A / TCCR3B: Timer/Counter #3 Control Registers TCCR3A/TCCR3B, TCCR1A/TCCR1B
diff --git a/platforms/avr/drivers/backlight_pwm.c b/platforms/avr/drivers/backlight_pwm.c
index 74d25753a4..f6ab9391e2 100644
--- a/platforms/avr/drivers/backlight_pwm.c
+++ b/platforms/avr/drivers/backlight_pwm.c
@@ -291,11 +291,11 @@ ISR(TIMERx_OVF_vect) {
 #endif // BACKLIGHT_BREATHING
 
 void backlight_init_ports(void) {
-    setPinOutput(BACKLIGHT_PIN);
+    gpio_set_pin_output(BACKLIGHT_PIN);
 #if BACKLIGHT_ON_STATE == 1
-    writePinLow(BACKLIGHT_PIN);
+    gpio_write_pin_low(BACKLIGHT_PIN);
 #else
-    writePinHigh(BACKLIGHT_PIN);
+    gpio_write_pin_high(BACKLIGHT_PIN);
 #endif
 
     // I could write a wall of text here to explain... but TL;DW
diff --git a/platforms/avr/drivers/ps2/ps2_io.c b/platforms/avr/drivers/ps2/ps2_io.c
index b75a1ab0be..fb87474372 100644
--- a/platforms/avr/drivers/ps2/ps2_io.c
+++ b/platforms/avr/drivers/ps2/ps2_io.c
@@ -19,18 +19,18 @@ void clock_init(void) {}
 
 void clock_lo(void) {
     // Transition from input with pull-up to output low via Hi-Z instead of output high
-    writePinLow(PS2_CLOCK_PIN);
-    setPinOutput(PS2_CLOCK_PIN);
+    gpio_write_pin_low(PS2_CLOCK_PIN);
+    gpio_set_pin_output(PS2_CLOCK_PIN);
 }
 
 void clock_hi(void) {
-    setPinInputHigh(PS2_CLOCK_PIN);
+    gpio_set_pin_input_high(PS2_CLOCK_PIN);
 }
 
 bool clock_in(void) {
-    setPinInputHigh(PS2_CLOCK_PIN);
+    gpio_set_pin_input_high(PS2_CLOCK_PIN);
     wait_us(1);
-    return readPin(PS2_CLOCK_PIN);
+    return gpio_read_pin(PS2_CLOCK_PIN);
 }
 
 /*
@@ -40,16 +40,16 @@ void data_init(void) {}
 
 void data_lo(void) {
     // Transition from input with pull-up to output low via Hi-Z instead of output high
-    writePinLow(PS2_DATA_PIN);
-    setPinOutput(PS2_DATA_PIN);
+    gpio_write_pin_low(PS2_DATA_PIN);
+    gpio_set_pin_output(PS2_DATA_PIN);
 }
 
 void data_hi(void) {
-    setPinInputHigh(PS2_DATA_PIN);
+    gpio_set_pin_input_high(PS2_DATA_PIN);
 }
 
 bool data_in(void) {
-    setPinInputHigh(PS2_DATA_PIN);
+    gpio_set_pin_input_high(PS2_DATA_PIN);
     wait_us(1);
-    return readPin(PS2_DATA_PIN);
+    return gpio_read_pin(PS2_DATA_PIN);
 }
diff --git a/platforms/avr/drivers/serial.c b/platforms/avr/drivers/serial.c
index 730d9b7a01..b529f9b45e 100644
--- a/platforms/avr/drivers/serial.c
+++ b/platforms/avr/drivers/serial.c
@@ -239,28 +239,28 @@ inline static void serial_delay_half2(void) {
 
 inline static void serial_output(void) ALWAYS_INLINE;
 inline static void serial_output(void) {
-    setPinOutput(SOFT_SERIAL_PIN);
+    gpio_set_pin_output(SOFT_SERIAL_PIN);
 }
 
 // make the serial pin an input with pull-up resistor
 inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
 inline static void serial_input_with_pullup(void) {
-    setPinInputHigh(SOFT_SERIAL_PIN);
+    gpio_set_pin_input_high(SOFT_SERIAL_PIN);
 }
 
 inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
 inline static uint8_t serial_read_pin(void) {
-    return !!readPin(SOFT_SERIAL_PIN);
+    return !!gpio_read_pin(SOFT_SERIAL_PIN);
 }
 
 inline static void serial_low(void) ALWAYS_INLINE;
 inline static void serial_low(void) {
-    writePinLow(SOFT_SERIAL_PIN);
+    gpio_write_pin_low(SOFT_SERIAL_PIN);
 }
 
 inline static void serial_high(void) ALWAYS_INLINE;
 inline static void serial_high(void) {
-    writePinHigh(SOFT_SERIAL_PIN);
+    gpio_write_pin_high(SOFT_SERIAL_PIN);
 }
 
 void soft_serial_initiator_init(void) {
diff --git a/platforms/avr/drivers/spi_master.c b/platforms/avr/drivers/spi_master.c
index ae9df03c02..74b847c71a 100644
--- a/platforms/avr/drivers/spi_master.c
+++ b/platforms/avr/drivers/spi_master.c
@@ -41,10 +41,10 @@ static uint8_t currentSlaveConfig = 0;
 static bool    currentSlave2X     = false;
 
 void spi_init(void) {
-    writePinHigh(SPI_SS_PIN);
-    setPinOutput(SPI_SCK_PIN);
-    setPinOutput(SPI_MOSI_PIN);
-    setPinInput(SPI_MISO_PIN);
+    gpio_write_pin_high(SPI_SS_PIN);
+    gpio_set_pin_output(SPI_SCK_PIN);
+    gpio_set_pin_output(SPI_MOSI_PIN);
+    gpio_set_pin_input(SPI_MISO_PIN);
 
     SPCR = (_BV(SPE) | _BV(MSTR));
 }
@@ -105,8 +105,8 @@ bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) {
         SPSR |= _BV(SPI2X);
     }
     currentSlavePin = slavePin;
-    setPinOutput(currentSlavePin);
-    writePinLow(currentSlavePin);
+    gpio_set_pin_output(currentSlavePin);
+    gpio_write_pin_low(currentSlavePin);
 
     return true;
 }
@@ -169,8 +169,8 @@ spi_status_t spi_receive(uint8_t *data, uint16_t length) {
 
 void spi_stop(void) {
     if (currentSlavePin != NO_PIN) {
-        setPinOutput(currentSlavePin);
-        writePinHigh(currentSlavePin);
+        gpio_set_pin_output(currentSlavePin);
+        gpio_write_pin_high(currentSlavePin);
         currentSlavePin = NO_PIN;
         SPSR &= ~(_BV(SPI2X));
         SPCR &= ~(currentSlaveConfig);