diff options
author | Nick Brassel <nick@tzarc.org> | 2021-08-29 08:20:25 +1000 |
---|---|---|
committer | Nick Brassel <nick@tzarc.org> | 2021-08-29 08:20:25 +1000 |
commit | f061ca497464fe85284906fb163a33eaee7a91ef (patch) | |
tree | 33ef1bfb529aed382e8526c607c4e18717f92571 /lib/usbhost/USB_Host_Shield_2.0/cdcprolific.h | |
parent | ff65185dec6f97be1eb49f17cea526a0d0bbf3d6 (diff) | |
parent | 4bad375d7c09d949a9dcdd4feba147c9c7a67ec6 (diff) |
Breaking changes develop merge to master, 2021Q3 edition. (#14196)
Diffstat (limited to 'lib/usbhost/USB_Host_Shield_2.0/cdcprolific.h')
-rw-r--r-- | lib/usbhost/USB_Host_Shield_2.0/cdcprolific.h | 159 |
1 files changed, 159 insertions, 0 deletions
diff --git a/lib/usbhost/USB_Host_Shield_2.0/cdcprolific.h b/lib/usbhost/USB_Host_Shield_2.0/cdcprolific.h new file mode 100644 index 0000000000..4991466410 --- /dev/null +++ b/lib/usbhost/USB_Host_Shield_2.0/cdcprolific.h @@ -0,0 +1,159 @@ +/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This software may be distributed and modified under the terms of the GNU +General Public License version 2 (GPL2) as published by the Free Software +Foundation and appearing in the file GPL2.TXT included in the packaging of +this file. Please note that GPL2 Section 2[b] requires that all works based +on this software must also be made publicly available under the terms of +the GPL2 ("Copyleft"). + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ +#if !defined(__CDCPROLIFIC_H__) +#define __CDCPROLIFIC_H__ + +#include "cdcacm.h" + +//#define PL2303_COMPAT // Uncomment it if you have compatibility problems + +#define PL_VID 0x067B +#define CHECK_PID(pid) ( pid != 0x2303 && pid != 0x0609 ) + +//#define PL_PID 0x0609 + +#define PROLIFIC_REV_H 0x0202 +#define PROLIFIC_REV_X 0x0300 +#define PROLIFIC_REV_HX_CHIP_D 0x0400 +#define PROLIFIC_REV_1 0x0001 + +#define kXOnChar '\x11' +#define kXOffChar '\x13' + +#define SPECIAL_SHIFT (5) +#define SPECIAL_MASK ((1<<SPECIAL_SHIFT) - 1) +#define STATE_ALL ( PD_RS232_S_MASK | PD_S_MASK ) +#define FLOW_RX_AUTO ( PD_RS232_A_RFR | PD_RS232_A_DTR | PD_RS232_A_RXO ) +#define FLOW_TX_AUTO ( PD_RS232_A_CTS | PD_RS232_A_DSR | PD_RS232_A_TXO | PD_RS232_A_DCD ) +#define CAN_BE_AUTO ( FLOW_RX_AUTO | FLOW_TX_AUTO ) +#define CAN_NOTIFY ( PD_RS232_N_MASK ) +#define EXTERNAL_MASK ( PD_S_MASK | (PD_RS232_S_MASK & ~PD_RS232_S_LOOP) ) +#define INTERNAL_DELAY ( PD_RS232_S_LOOP ) +#define DEFAULT_AUTO ( PD_RS232_A_DTR | PD_RS232_A_RFR | PD_RS232_A_CTS | PD_RS232_A_DSR ) +#define DEFAULT_NOTIFY 0x00 +#define DEFAULT_STATE ( PD_S_TX_ENABLE | PD_S_RX_ENABLE | PD_RS232_A_TXO | PD_RS232_A_RXO ) + +#define CONTINUE_SEND 1 +#define PAUSE_SEND 2 + +#define kRxAutoFlow ((UInt32)( PD_RS232_A_RFR | PD_RS232_A_DTR | PD_RS232_A_RXO )) +#define kTxAutoFlow ((UInt32)( PD_RS232_A_CTS | PD_RS232_A_DSR | PD_RS232_A_TXO | PD_RS232_A_DCD )) +#define kControl_StateMask ((UInt32)( PD_RS232_S_CTS | PD_RS232_S_DSR | PD_RS232_S_CAR | PD_RS232_S_RI )) +#define kRxQueueState ((UInt32)( PD_S_RXQ_EMPTY | PD_S_RXQ_LOW_WATER | PD_S_RXQ_HIGH_WATER | PD_S_RXQ_FULL )) +#define kTxQueueState ((UInt32)( PD_S_TXQ_EMPTY | PD_S_TXQ_LOW_WATER | PD_S_TXQ_HIGH_WATER | PD_S_TXQ_FULL )) + +#define kCONTROL_DTR 0x01 +#define kCONTROL_RTS 0x02 + +#define kStateTransientMask 0x74 +#define kBreakError 0x04 +#define kFrameError 0x10 +#define kParityError 0x20 +#define kOverrunError 0x40 + +#define kCTS 0x80 +#define kDSR 0x02 +#define kRI 0x08 +#define kDCD 0x01 +#define kHandshakeInMask ((UInt32)( PD_RS232_S_CTS | PD_RS232_S_DSR | PD_RS232_S_CAR | PD_RS232_S_RI )) + +#define VENDOR_WRITE_REQUEST_TYPE 0x40 +#define VENDOR_WRITE_REQUEST 0x01 + +#define VENDOR_READ_REQUEST_TYPE 0xc0 +#define VENDOR_READ_REQUEST 0x01 + +// Device Configuration Registers (DCR0, DCR1, DCR2) +#define SET_DCR0 0x00 +#define GET_DCR0 0x80 +#define DCR0_INIT 0x01 +#define DCR0_INIT_H 0x41 +#define DCR0_INIT_X 0x61 + +#define SET_DCR1 0x01 +#define GET_DCR1 0x81 +#define DCR1_INIT_H 0x80 +#define DCR1_INIT_X 0x00 + +#define SET_DCR2 0x02 +#define GET_DCR2 0x82 +#define DCR2_INIT_H 0x24 +#define DCR2_INIT_X 0x44 + +// On-chip Data Buffers: +#define RESET_DOWNSTREAM_DATA_PIPE 0x08 +#define RESET_UPSTREAM_DATA_PIPE 0x09 + + +#define PL_MAX_ENDPOINTS 4 + +enum tXO_State { + kXOnSent = -2, + kXOffSent = -1, + kXO_Idle = 0, + kXOffNeeded = 1, + kXOnNeeded = 2 +}; + +enum pl2303_type { + unknown, + type_0, /* don't know the difference between type 0 and */ + type_1, /* type 1, until someone from prolific tells us... */ + rev_X, + rev_HX, /* HX version of the pl2303 chip */ + rev_H +}; + + +class PL2303 : public ACM { + uint16_t wPLType; // Type of chip + +public: + PL2303(USB *pusb, CDCAsyncOper *pasync); + + // USBDeviceConfig implementation + uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed); + //virtual uint8_t Release(); + //virtual uint8_t Poll(); + //virtual uint8_t GetAddress() { return bAddress; }; + + //// UsbConfigXtracter implementation + //virtual void EndpointXtract(uint8_t conf, uint8_t iface, uint8_t alt, uint8_t proto, const USB_ENDPOINT_DESCRIPTOR *ep); + +#ifdef PL2303_COMPAT +private: + /* Prolific proprietary requests */ + uint8_t vendorRead( uint8_t val_lo, uint8_t val_hi, uint16_t index, uint8_t* buf ); + uint8_t vendorWrite( uint8_t val_lo, uint8_t val_hi, uint8_t index ); +#endif +}; + +#ifdef PL2303_COMPAT +/* vendor read request */ +inline uint8_t PL2303::vendorRead( uint8_t val_lo, uint8_t val_hi, uint16_t index, uint8_t* buf ) +{ + return( pUsb->ctrlReq(bAddress, 0, VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, val_lo, val_hi, index, 1, 1, buf, NULL )); +} + +/* vendor write request */ +inline uint8_t PL2303::vendorWrite( uint8_t val_lo, uint8_t val_hi, uint8_t index ) +{ + return( pUsb->ctrlReq(bAddress, 0, VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, val_lo, val_hi, index, 0, 0, NULL, NULL )); +} +#endif + +#endif // __CDCPROLIFIC_H__ |