summaryrefslogtreecommitdiff
path: root/keyboards
diff options
context:
space:
mode:
authorFred Sundvik <fsundvik@gmail.com>2016-11-20 19:28:10 +0200
committerFred Sundvik <fsundvik@gmail.com>2016-11-20 19:28:10 +0200
commitc86bbf474e7709749dfd5e09fa5defd5e6baaaa3 (patch)
tree1d904fab61f4f4fb5a04388b5e516acd4f7ebc9f /keyboards
parent3b990c08dcc0e57875e9220a5e6371f60679c7ae (diff)
Always initialze the Infinity Ergodox backlight
Otherwise it will stay lit. The set_led functionality is also disabled since it doesn't work properly for slaves.
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/ergodox/infinity/infinity.c6
-rw-r--r--keyboards/ergodox/infinity/led.c25
2 files changed, 5 insertions, 26 deletions
diff --git a/keyboards/ergodox/infinity/infinity.c b/keyboards/ergodox/infinity/infinity.c
index c5793385fe..02db67eaf2 100644
--- a/keyboards/ergodox/infinity/infinity.c
+++ b/keyboards/ergodox/infinity/infinity.c
@@ -38,7 +38,6 @@ void init_serial_link_hal(void) {
// Using a higher pre-scalar without flicker is possible but FTM0_MOD will need to be reduced
// Which will reduce the brightness range
#define PRESCALAR_DEFINE 0
-#ifdef VISUALIZER_ENABLE
void lcd_backlight_hal_init(void) {
// Setup Backlight
SIM->SCGC6 |= SIM_SCGC6_FTM0;
@@ -76,7 +75,6 @@ void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) {
CHANNEL_GREEN.CnV = g;
CHANNEL_BLUE.CnV = b;
}
-#endif
__attribute__ ((weak))
void matrix_init_user(void) {
@@ -92,6 +90,10 @@ void matrix_init_kb(void) {
// runs once when the firmware starts up
matrix_init_user();
+ // The backlight always has to be initialized, otherwise it will stay lit
+#ifndef VISUALIZER_ENABLE
+ lcd_backlight_hal_init();
+#endif
}
void matrix_scan_kb(void) {
diff --git a/keyboards/ergodox/infinity/led.c b/keyboards/ergodox/infinity/led.c
index 77195bb358..8175c1c5c5 100644
--- a/keyboards/ergodox/infinity/led.c
+++ b/keyboards/ergodox/infinity/led.c
@@ -21,29 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
void led_set(uint8_t usb_led) {
-// The LCD backlight functionality conflicts with this simple
-// red backlight
-#if !defined(LCD_BACKLIGHT_ENABLE) && defined(STATUS_LED_ENABLE)
- // PTC1: LCD Backlight Red(0:on/1:off)
- GPIOC->PDDR |= (1<<1);
- PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
- if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
- GPIOC->PCOR |= (1<<1);
- } else {
- GPIOC->PSOR |= (1<<1);
- }
-#elif !defined(LCD_BACKLIGHT_ENABLE)
+ //TODO: Add led emulation if there's no customized visualization
(void)usb_led;
- GPIOC->PDDR |= (1<<1);
- PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
- GPIOC->PSOR |= (1<<1);
- GPIOC->PDDR |= (1<<2);
- PORTC->PCR[2] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
- GPIOC->PSOR |= (1<<2);
- GPIOC->PDDR |= (1<<3);
- PORTC->PCR[3] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
- GPIOC->PSOR |= (1<<3);
-#else
- (void)usb_led;
-#endif
}