Ferris reorganization (#10564)

* Add my own keymap

* Layer 0: Workman
* Layer 1: RSTHD (my own take on it)
* Layer 2: Mouse
* Layer 3: Navigation
* Layer 4: Symbols right
* Layer 5: Symbols left
* Layer 6: Fn keys
* Layer 7: Numbers
* Layer 8: Vim and misceallaneaous accessible from any other layer

* Move the current code to a 0.1 folder in preparation for upcoming changes

Version 0.2 is currently being prototyped and uses an arm chip which
will need its own firmware.

There is also the Ferris sweep which uses a pro-micro compatible board
which will need its own directory.

* Move Ferris out of handwired and into the light

The keyboard is now well out of the prototype phase as tens of them have
been produced and acquired by various people.

With 0.2 coming out, adoption is going to increase again as the board
will be available for sale at some recognized vendors.

Now is probably a good time to recognize its status as more than a
prototype :)

* Add code for the Ferris Sweep (a.k.a cradio)

The Ferris Sweep is a creation of the talented @davidphilipbarr, a.k.a DPB.
It has the key layout of a Ferris and uses a pro-micro connected to the
switches via direct pins so that diodes are not needed and the soldering
is minimal.

With their blessing, I took the code for it from DPB's own repo:
https://github.com/davidphilipbarr/36keys/tree/master/qmk/cradio
and did some adaptations such as removing commented out code, enabling
EE_HANDS and mouse keys for consistency with my existing Ferris code.

* Fix indentation in rules.mk

* Fix indentation in sweep's config

* Remove unnecessary lines from sweep's rules.mk

* Remove unnecessary lines from sweep's rules.mk

* Rename 0.1 to 0_1

This avoids the dot looking like the separation between a filename and
its extension.

In the same commit, bring matrix.c to the 0_1 folder as this was needed
for the code to compile properly (matrix.c is referred to in the readme
under `0_1` and is specific to that revision of the firmware).

* Update copyright statements for Sweep

18 files changed, 369 insertions, 5 deletions

diff --git a/keyboards/handwired/ferris/ferris.c b/keyboards/ferris/0_1/0_1.c
index 0e132fa984..dbdb0b4bdc 100644
--- a/keyboards/handwired/ferris/ferris.c
+++ b/keyboards/ferris/0_1/0_1.c
@@ -14,4 +14,4 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#include "ferris.h"
+#include "0_1.h"
diff --git a/keyboards/handwired/ferris/ferris.h b/keyboards/ferris/0_1/0_1.h
index 4602637ca6..4602637ca6 100644
--- a/keyboards/handwired/ferris/ferris.h
+++ b/keyboards/ferris/0_1/0_1.h
diff --git a/keyboards/handwired/ferris/config.h b/keyboards/ferris/0_1/config.h
index 33494d9273..33494d9273 100644
--- a/keyboards/handwired/ferris/config.h
+++ b/keyboards/ferris/0_1/config.h
diff --git a/keyboards/handwired/ferris/matrix.c b/keyboards/ferris/0_1/matrix.c
index e13c35d358..e13c35d358 100644
--- a/keyboards/handwired/ferris/matrix.c
+++ b/keyboards/ferris/0_1/matrix.c
diff --git a/keyboards/handwired/ferris/rules.mk b/keyboards/ferris/0_1/rules.mk
index 8645dbba0d..8645dbba0d 100644
--- a/keyboards/handwired/ferris/rules.mk
+++ b/keyboards/ferris/0_1/rules.mk
diff --git a/keyboards/handwired/ferris/info.json b/keyboards/ferris/info.json
index ffffb58ecf..ffffb58ecf 100644
--- a/keyboards/handwired/ferris/info.json
+++ b/keyboards/ferris/info.json
diff --git a/keyboards/handwired/ferris/keymaps/default/config.h b/keyboards/ferris/keymaps/default/config.h
index cf0fb7478e..cf0fb7478e 100644
--- a/keyboards/handwired/ferris/keymaps/default/config.h
+++ b/keyboards/ferris/keymaps/default/config.h
diff --git a/keyboards/handwired/ferris/keymaps/default/keymap.json b/keyboards/ferris/keymaps/default/keymap.json
index 7f7d614e20..7f7d614e20 100644
--- a/keyboards/handwired/ferris/keymaps/default/keymap.json
+++ b/keyboards/ferris/keymaps/default/keymap.json
diff --git a/keyboards/handwired/ferris/keymaps/default/readme.md b/keyboards/ferris/keymaps/default/readme.md
index 252f886f52..252f886f52 100644
--- a/keyboards/handwired/ferris/keymaps/default/readme.md
+++ b/keyboards/ferris/keymaps/default/readme.md
diff --git a/keyboards/handwired/ferris/keymaps/json2crab.py b/keyboards/ferris/keymaps/json2crab.py
index a32429fae5..a32429fae5 100755
--- a/keyboards/handwired/ferris/keymaps/json2crab.py
+++ b/keyboards/ferris/keymaps/json2crab.py
diff --git a/keyboards/ferris/keymaps/pierrec83/config.h b/keyboards/ferris/keymaps/pierrec83/config.h
new file mode 100644
index 0000000000..cf0fb7478e
--- /dev/null
+++ b/keyboards/ferris/keymaps/pierrec83/config.h
@@ -0,0 +1,39 @@
+/*
+Copyright 2020 Pierre Chevalier <pierrechevalier83@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+// Set the mouse settings to a comfortable speed/accuracy trade-off,
+// assuming a screen refresh rate of 60 Htz or higher
+// The default is 50. This makes the mouse ~3 times faster and more accurate
+#define MOUSEKEY_INTERVAL 16
+// The default is 20. Since we made the mouse about 3 times faster with the previous setting,
+// give it more time to accelerate to max speed to retain precise control over short distances.
+#define MOUSEKEY_TIME_TO_MAX 40
+// The default is 300. Let's try and make this as low as possible while keeping the cursor responsive
+#define MOUSEKEY_DELAY 100
+// It makes sense to use the same delay for the mouseweel
+#define MOUSEKEY_WHEEL_DELAY 100
+// The default is 100
+#define MOUSEKEY_WHEEL_INTERVAL 50
+// The default is 40
+#define MOUSEKEY_WHEEL_TIME_TO_MAX 100
+
+// Pick good defaults for enabling homerow modifiers
+#define TAPPING_TERM 200
+#define PERMISSIVE_HOLD
+#define IGNORE_MOD_TAP_INTERRUPT
+#define TAPPING_FORCE_HOLD
diff --git a/keyboards/ferris/keymaps/pierrec83/keymap.json b/keyboards/ferris/keymaps/pierrec83/keymap.json
new file mode 100644
index 0000000000..2372e7e372
--- /dev/null
+++ b/keyboards/ferris/keymaps/pierrec83/keymap.json
@@ -0,0 +1,118 @@
+{    "version": 1,
+    "notes": "My awesome keymap",
+    "documentation": "\"This file is a QMK Configurator export. You can import this at <https://config.qmk.fm>. It can also be used directly with QMK's source code.\n\nTo setup your QMK environment check out the tutorial: <https://docs.qmk.fm/#/newbs>\n\nYou can convert this file to a keymap.c using this command: `qmk json2c {keymap}`\n\nYou can compile this keymap using this command: `qmk compile {keymap}`\"\n",
+    "keyboard": "handwired/ferris",
+    "keymap": "pierrec83",
+    "layout": "LAYOUT",
+    "layers": [
+        ["KC_Q"                   , "KC_D"                 , "KC_R"           , "KC_W"                 , "KC_B",
+         "KC_J"                   , "KC_F"                 , "KC_U"           , "KC_P"                 , "KC_SCLN",
+
+         "LSFT_T(KC_A)"           , "LT(6,KC_S)"           , "LT(2,KC_H)"     , "LT(4,KC_T)"           , "KC_G",
+         "KC_Y"                   , "LT(5,KC_N)"           , "LT(3,KC_E)"     , "LT(7,KC_O)"           , "LSFT_T(KC_I)",
+
+         "KC_Z"                   , "LCTL_T(KC_X)"         , "LALT_T(KC_M)"   , "KC_C"                 , "KC_V",
+         "KC_K"                   , "KC_L"                 , "LALT_T(KC_COMM)", "LCTL_T(KC_DOT)"       , "KC_SLSH",
+
+         "LCA(KC_UP)"             , "KC_BSPC",
+         "LT(8,KC_SPC)"           , "LCA(KC_DOWN)"
+        ],
+        ["KC_Q"                   , "KC_C"                 , "KC_M"           , "KC_Y"                 , "KC_COLN",
+         "KC_Z"                   , "KC_W"                 , "KC_COMM"        , "KC_U"                 , "KC_J",
+
+         "LSFT_T(KC_R)"           , "LT(6,KC_S)"           , "LT(2,KC_T)"     , "LT(4,KC_H)"           , "KC_X",
+         "KC_TRNS"                , "LT(5,KC_N)"           , "LT(3,KC_A)"     , "LT(7,KC_I)"           , "LSFT_T(KC_O)",
+
+         "KC_B"                   , "LCTL_T(KC_F)"         , "LALT_T(KC_G)"   , "KC_D"                 , "KC_V",
+         "KC_ESC"                 , "KC_L"                 , "LALT_T(KC_DOT)" , "LCTL_T(KC_BSPC)"      , "KC_K",
+
+         "LCA(KC_UP)"             , "KC_E",
+         "LT(8,KC_SPC)"           , "LCA(KC_DOWN)"
+        ],
+        ["KC_TRNS"                , "ANY(LCTL(LSFT(KC_C)))", "KC_TRNS"        , "ANY(LCTL(LSFT(KC_V)))", "KC_TRNS",
+         "KC_TRNS"                , "KC_BTN1"              , "KC_WH_U"        , "KC_BTN2"              , "KC_TRNS",
+
+         "KC_TRNS"                , "KC_BTN2"              , "KC_NO"          , "KC_BTN1"              , "KC_TRNS",
+         "KC_TRNS"                , "KC_MS_L"              , "KC_MS_D"        , "KC_MS_U"              , "KC_MS_R",
+
+         "KC_TRNS"                , "KC_TRNS"              , "KC_TRNS"        , "KC_TRNS"              , "KC_TRNS",
+         "KC_TRNS"                , "KC_WH_L"              , "KC_WH_D"        , "KC_WH_R"              , "KC_TRNS",
+
+         "ANY(LCTL(LSFT(KC_TAB)))", "KC_TRNS",
+         "KC_TRNS"                , "LCTL(KC_TAB)"
+        ],
+        ["KC_TRNS"                , "KC_TRNS"              , "KC_PGUP"        , "KC_TRNS"              , "KC_TRNS",
+         "KC_TRNS"                , "KC_TRNS"              , "KC_TRNS"        , "KC_TRNS"              , "KC_TRNS",
+
+         "KC_LEFT"                , "KC_UP"                , "KC_DOWN"        , "KC_RGHT"              , "KC_TRNS",
+         "KC_TRNS"                , "KC_LGUI"              , "KC_NO"          , "LCTL(KC_LALT)"        , "LCA(KC_LSFT)",
+
+         "KC_TRNS"                , "KC_HOME"              , "KC_PGDN"        , "KC_END"               , "KC_TRNS",
+         "KC_TRNS"                , "KC_TRNS"              , "KC_TRNS"        , "KC_TRNS"              , "KC_TRNS",
+
+         "LGUI(KC_LEFT)"          , "KC_TRNS",
+         "KC_TRNS"                , "LGUI(KC_RGHT)"
+        ],
+        ["KC_TRNS"                , "KC_TRNS"              , "KC_TRNS"        , "KC_TRNS"              , "KC_TRNS",
+         "KC_TRNS"                , "KC_UNDS"              , "KC_PIPE"        , "KC_QUOT"              , "KC_TRNS",
+
+         "KC_CIRC"                , "KC_ASTR"              , "KC_AMPR"        , "KC_NO"                , "KC_TRNS",
+         "KC_HASH"                , "KC_TILD"              , "KC_SLSH"        , "KC_DQUO"              , "KC_DLR",
+
+         "KC_TRNS"                , "KC_TRNS"              , "KC_TRNS"        , "KC_TRNS"              , "KC_TRNS",
+         "KC_TRNS"                , "KC_MINS"              , "KC_BSLS"        , "KC_GRV"               , "KC_TRNS",
+
+         "KC_BRID"                , "KC_TRNS",
+         "KC_TRNS"                , "KC_BRIU"
+        ],
+        ["KC_TRNS"                , "KC_COLN"              , "KC_LT"          , "KC_GT"                , "KC_SCLN",
+         "KC_TRNS"                , "KC_TRNS"              , "KC_TRNS"        , "KC_TRNS"              , "KC_TRNS",
+
+         "KC_LCBR"                , "KC_RCBR"              , "KC_LPRN"        , "KC_RPRN"              , "KC_AT",
+         "KC_TRNS"                , "KC_NO"                , "KC_EQL"         , "KC_PLUS"              , "KC_PERC",
+
+         "KC_TRNS"                , "KC_EXLM"              , "KC_LBRC"        , "KC_RBRC"              , "KC_TRNS",
+         "KC_TRNS"                , "KC_TRNS"              , "KC_TRNS"        , "KC_TRNS"              , "KC_TRNS",
+
+         "KC_VOLD"                , "KC_TRNS",
+         "KC_TRNS"                , "KC_VOLU"
+        ],
+        ["KC_TRNS"                , "KC_TRNS"              , "KC_TRNS"        , "KC_TRNS"              , "KC_TRNS",
+         "KC_TRNS"                , "KC_F7"                , "KC_F8"          , "KC_F9"                , "KC_F10",
+
+         "KC_TRNS"                , "KC_TRNS"              , "LCTL(KC_LALT)"  , "KC_TRNS"              , "KC_TRNS",
+         "KC_TRNS"                , "KC_F4"                , "KC_F5"          , "KC_F6"                , "KC_F11",
+
+         "KC_TRNS"                , "KC_TRNS"              , "KC_TRNS"        , "KC_TRNS"              , "KC_TRNS",
+         "KC_TRNS"                , "KC_F1"                , "KC_F2"          , "KC_F3"                , "KC_F12",
+
+         "KC_TRNS"                , "KC_TRNS",
+         "KC_TRNS"                , "KC_TRNS"
+        ],
+        ["KC_PSLS"                , "KC_7"                 , "KC_8"           , "KC_9"                 , "KC_PPLS",
+         "KC_TRNS"                , "KC_TRNS"              , "KC_TRNS"        , "KC_TRNS"              , "KC_TRNS",
+
+         "KC_0"                   , "KC_1"                 , "KC_2"           , "KC_3"                 , "KC_PMNS",
+         "KC_TRNS"                , "KC_TRNS"              , "KC_TRNS"        , "KC_NO"                , "KC_TRNS",
+
+         "KC_PAST"                , "KC_4"                 , "KC_5"           , "KC_6"                 , "KC_PEQL",
+         "KC_TRNS"                , "KC_TRNS"              , "KC_TRNS"        , "KC_TRNS"              , "KC_TRNS",
+
+         "KC_TRNS"                , "KC_TRNS",
+         "KC_TRNS"                , "KC_TRNS"
+        ],
+        ["KC_TRNS"                , "KC_ESC"               , "KC_COLN"        , "KC_TRNS"              , "KC_TRNS",
+         "DF(2)"                  , "KC_TRNS"              , "KC_TRNS"        , "KC_TRNS"              , "KC_DEL",
+
+         "KC_TRNS"                , "KC_PERC"              , "KC_SLSH"        , "KC_ENT"               , "KC_EXLM",
+         "DF(1)"                  , "KC_LGUI"              , "KC_TRNS"        , "KC_TRNS"              , "KC_TRNS",
+
+         "KC_TRNS"                , "KC_TRNS"              , "KC_TRNS"        , "KC_TRNS"              , "KC_TRNS",
+         "DF(0)"                  , "KC_TRNS"              , "RALT_T(KC_COMM)", "RCTL_T(KC_DOT)"       , "RESET",
+
+         "KC_TRNS"                , "KC_TAB",
+         "KC_NO"                  , "KC_TRNS"
+        ]
+    ],
+    "author": "@pierrec83"
+}
diff --git a/keyboards/ferris/keymaps/pierrec83/readme.md b/keyboards/ferris/keymaps/pierrec83/readme.md
new file mode 100644
index 0000000000..d96a3bb811
--- /dev/null
+++ b/keyboards/ferris/keymaps/pierrec83/readme.md
@@ -0,0 +1,43 @@
+@pierrec83's personal keymap for the Ferris keyboard
+====================================================
+
+This keymap shares many commonalities with the default keymap.
+See its readme for a write-up on many of the decisions, including
+how to generate the formatted json file with json2crab.py and the
+general philosophy for each layer.
+
+Because this is my own keymap, I didn't refrain from using shortcuts
+that make sense for me and may not make sense for most.
+
+Key differences from the default keymap include:
+
+Alpha layers:
+-------------
+
+Because I only learned to touch type when I switched from qwerty to workman,
+my base layer is workman and my layout doesn't contain a qwerty layer.
+
+My layer 1 hosts a variant of RSTHD that I am developing, inspired from workman's
+focus on reducing side-index-motion. It should become my end game keymap eventually,
+but I still haven't found the time to learn it to a working proficiency.
+
+Secondary thumbs:
+-----------------
+
+Instead of a placeholder 0 and 1, the secondary thumbs on my keymap
+perform the following actions:
+* Navigate to previous and next workspace the base layer
+* Navigate to previous and next tab on the mouse layer
+* Volume control on layer
+* Brightness control on layer
+
+Mouse layer:
+------------
+
+* Copy/Paste shortcuts on the left hand, on the upper row.
+
+Always available layer:
+-----------------------
+
+* Esc and column are placed differently to allow easy vim navigation with the positions of w and q in the workman base layer
+* Enable permanent switch to the RSTHD layer in addition to the mouse layer
diff --git a/keyboards/handwired/ferris/readme.md b/keyboards/ferris/readme.md
index 23aeca874c..74a08a38fe 100644
--- a/keyboards/handwired/ferris/readme.md
+++ b/keyboards/ferris/readme.md
@@ -6,11 +6,14 @@
 A split 34 keys column staggered keyboard named and decorated after the rustlang mascott. All PCB files and some thoughts on the design are available on the [project's github page](https://github.com/pierrechevalier83/ferris)
 
 * Keyboard Maintainer: [Pierre Chevalier](https://github.com/pierrechevalier83)
-* Hardware Supported: Ferris PCB
-* Hardware Availability: Still in prototype stage
+* Hardware Supported:
+	* Ferris 0.1 (With atmega32u4 chip. Comes in 4 variants: base, low, high and compact)
+	* Ferris sweep (With pro-micro. Comes in a couple of PCB edge cuts shapes, but with identical pinout)
+* Hardware Availability: Pierre Chevalier has been selling keyboard kits (see the #ferris channel in the 40% discord chat). Wider availability is on the horizon.
 
-Make example for this keyboard (after setting up your build environment):
+Make examples for this keyboard (after setting up your build environment):
 
-    make handwired/ferris:default
+    make ferris/0_1:default
+    make ferris/sweep:default:avrdude-split-right
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/ferris/sweep/config.h b/keyboards/ferris/sweep/config.h
new file mode 100644
index 0000000000..ad960610d1
--- /dev/null
+++ b/keyboards/ferris/sweep/config.h
@@ -0,0 +1,74 @@
+/* Copyright 2018-2020 ENDO Katsuhiro <ka2hiro@curlybracket.co.jp> David Philip Barr <@davidphilipbarr> Pierre Chevalier <pierrechevalier83@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC2AB
+#define PRODUCT_ID      0x3939
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    DPB
+#define PRODUCT         Ferris sweep
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 5
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *                  NO_DIODE = switches are directly connected to AVR pins
+ *
+*/
+#define DIRECT_PINS { \
+    { E6, F7, F6, F5, F4 }, \
+    { B1, B3, B2, B6, D3 }, \
+    { D1, D0, D4, C6, D7 }, \
+    { B4, B5, NO_PIN, NO_PIN, NO_PIN } \
+}
+
+#define DIRECT_PINS_RIGHT  { \
+    { F4, F5, F6, F7, E6 }, \
+    { D3,B6,B2,B3,B1 }, \
+    { D7,C6,D4,D0,D1}, \
+    { B5, B4, NO_PIN, NO_PIN, NO_PIN } \
+}
+
+
+
+#define UNUSED_PINS
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Serial settings */
+#define USE_SERIAL
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN D2
+
+#define EE_HANDS
diff --git a/keyboards/ferris/sweep/rules.mk b/keyboards/ferris/sweep/rules.mk
new file mode 100644
index 0000000000..ce4d52156d
--- /dev/null
+++ b/keyboards/ferris/sweep/rules.mk
@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+UNICODE_ENABLE = yes        # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+SPLIT_KEYBOARD = yes        # Use shared split_common code
diff --git a/keyboards/ferris/sweep/sweep.c b/keyboards/ferris/sweep/sweep.c
new file mode 100644
index 0000000000..5b41bad848
--- /dev/null
+++ b/keyboards/ferris/sweep/sweep.c
@@ -0,0 +1,16 @@
+/* Copyright 2018-2020 ENDO Katsuhiro <ka2hiro@curlybracket.co.jp> David Philip Barr <@davidphilipbarr> Pierre Chevalier <pierrechevalier83@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "sweep.h"
diff --git a/keyboards/ferris/sweep/sweep.h b/keyboards/ferris/sweep/sweep.h
new file mode 100644
index 0000000000..e8d66ebc67
--- /dev/null
+++ b/keyboards/ferris/sweep/sweep.h
@@ -0,0 +1,47 @@
+/* Copyright 2018-2020 ENDO Katsuhiro <ka2hiro@curlybracket.co.jp> David Philip Barr <@davidphilipbarr> Pierre Chevalier <pierrechevalier83@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+// readability
+#define ___ KC_NO
+
+#define LAYOUT( \
+        L01, L02, L03, L04, L05, R01, R02, R03, R04, R05, \
+        L06, L07, L08, L09, L10, R06, R07, R08, R09, R10, \
+        L11, L12, L13, L14, L15, R11, R12, R13, R14, R15, \
+                  L16, L17, R16, R17       \
+    ) \
+    { \
+        { L01, L02, L03, L04, L05 }, \
+        { L06, L07, L08, L09, L10 }, \
+        { L11, L12, L13, L14, L15 }, \
+        { L16, L17, ___, ___ , ___}, \
+        { R01, R02, R03, R04, R05 }, \
+        { R06, R07, R08, R09, R10 }, \
+        { R11, R12, R13, R14, R15 }, \
+        { R16, R17, ___, ___, ___ }  \
+    }
+