diff options
| author | SethSenpai <pimwing@gmail.com> | 2016-10-03 18:27:52 +0000 |
|---|---|---|
| committer | SethSenpai <pimwing@gmail.com> | 2016-10-03 18:27:52 +0000 |
| commit | 0e2786e39602bdfcdb8aa567eaf769c700a1b3db (patch) | |
| tree | db247c8d07436d8c415707ab33047fb28a500c9b /keyboards | |
| parent | 0f06e94d5d8a07d0d896bf2cc72058ae11d17450 (diff) | |
updated readme with images
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/handwired/gamenum/README.md | 10 |
1 files changed, 9 insertions, 1 deletions
diff --git a/keyboards/handwired/gamenum/README.md b/keyboards/handwired/gamenum/README.md index 9e22ff2fcb..5b53004efd 100644 --- a/keyboards/handwired/gamenum/README.md +++ b/keyboards/handwired/gamenum/README.md @@ -16,7 +16,15 @@ Firmware was build for use with a Pro Micro based on a ATMEGA32u4 at 16mHz. The indicator LED's are normally assigned to `pin C6` and `pin D4`, C6 goes high when the first layer is used, D4 goes high when layer 2 is used. Both LED's are off when the default layer is enabled. '+' of the LED goes to the respective pins and can be joined together on the '-' into a resistor that runs to the ground pin of the pro micro. With a standard LED a resistor value of 100 ohm is fine, keep in mind that you cannot use high powered LEDS on these pins without ruining your pro micro. -Schematic of the build is coming soon. +## schematic of the switches and diodes + + + +Keep in mind that the minus of the diodes should point towards the pro micros inputs. + +##LED hookup + + ## Adding more layers |