move @yangdigi 's keyboards to a YDKB folder (#15681)

8 files changed, 0 insertions, 314 deletions

diff --git a/keyboards/yd68/config.h b/keyboards/yd68/config.h
deleted file mode 100644
index a501a98476..0000000000
--- a/keyboards/yd68/config.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
-Copyright 2018 Ryan "Izzy" Bales
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0002
-#define MANUFACTURER    YANG
-#define PRODUCT         YD68v2
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B5, C6, C7, D7, B4 }
-#define MATRIX_COL_PINS { B6, F7, F6, F5, F4, F1, F0, E6, B0, B7, D0, D1, D2, D3, D5 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-#define LED_CAPS_LOCK_PIN D4
-#define LED_PIN_ON_STATE 0
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-#define RGB_DI_PIN B3
-#ifdef RGB_DI_PIN
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 10
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
diff --git a/keyboards/yd68/info.json b/keyboards/yd68/info.json
deleted file mode 100644
index 8797620557..0000000000
--- a/keyboards/yd68/info.json
+++ /dev/null
@@ -1,10 +0,0 @@
-{
-  "keyboard_name": "YD68",
-  "url": "",
-  "maintainer": "qmk",
-  "layouts": {
-    "LAYOUT_ansi": {
-      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Win", "x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
-    }
-  }
-}
diff --git a/keyboards/yd68/keymaps/default/keymap.c b/keyboards/yd68/keymaps/default/keymap.c
deleted file mode 100644
index c8b49c76a3..0000000000
--- a/keyboards/yd68/keymaps/default/keymap.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/* Copyright 2018 Ryan "Izzy" Bales
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-// Defines the keycodes used by our macros in process_record_user
-enum custom_keycodes {
-  YD68_BT_PWR = SAFE_RANGE,
-  YD68_RGB_PWR,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT_ansi( /* Base */
-	KC_ESC,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSPC,KC_HOME,
-	KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,KC_BSLS,KC_END,
-	KC_CAPS, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,         KC_ENT, KC_PGUP,
-	KC_LSFT,         KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH, KC_RSFT,KC_UP,  KC_PGDN,
-	KC_LCTL, KC_LGUI,KC_LALT,                        KC_SPC,                 KC_RALT,KC_RGUI,KC_RCTRL,KC_LEFT,KC_DOWN,KC_RGHT
-	),
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case YD68_BT_PWR:
-      if (record->event.pressed) {
-        // when keycode YD68_BT_PWR is pressed
-      } else {
-        // when keycode YD68_BT_PWR is released
-      }
-      break;
-    case YD68_RGB_PWR:
-      if (record->event.pressed) {
-        // when keycode YD68_RGB_PWR is pressed
-		PORTE ^= (1<<2);
-      } else {
-        // when keycode YD68_RGB_PWR is released
-      }
-      break;
-  }
-  return true;
-}
diff --git a/keyboards/yd68/keymaps/default/readme.md b/keyboards/yd68/keymaps/default/readme.md
deleted file mode 100644
index 877e64f18b..0000000000
--- a/keyboards/yd68/keymaps/default/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-# The default keymap for yd68
\ No newline at end of file
diff --git a/keyboards/yd68/readme.md b/keyboards/yd68/readme.md
deleted file mode 100644
index 7e5e83bcc9..0000000000
--- a/keyboards/yd68/readme.md
+++ /dev/null
@@ -1,15 +0,0 @@
-# yd68
-
-[yd68](https://imgur.com/gallery/Ygo668L)
-
-A 68-key board with RGB underlighting and bluetooth.
-
-Keyboard Maintainer: [Izzy84075](https://github.com/izzy84075)  
-Hardware Supported: YD68/YD68v2  
-Hardware Availability: [KBDFans](https://kbdfans.cn/collections/diy-kit/products/yd68-65-bluetooth-custom-keyboard-pcb)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make yd68:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/yd68/rules.mk b/keyboards/yd68/rules.mk
deleted file mode 100644
index 561e8f4ca1..0000000000
--- a/keyboards/yd68/rules.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
diff --git a/keyboards/yd68/yd68.c b/keyboards/yd68/yd68.c
deleted file mode 100644
index 22f75f7f81..0000000000
--- a/keyboards/yd68/yd68.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Copyright 2018 Ryan "Izzy" Bales
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "yd68.h"
-
-void keyboard_pre_init_kb(void) {
-	//Backlight LEDs Output Low
-	setPinOutput(D6);
-	writePinLow(D6);
-	
-	//RGB power output low
-	setPinOutput(E2);
-	writePinLow(E2);
-	
-	//Bluetooth power output high
-	setPinOutput(B2);
-	writePinLow(B2);
-	
-	//RGB data output low
-	setPinOutput(B3);
-	writePinLow(B3);
-	
-	keyboard_pre_init_user();
-}
diff --git a/keyboards/yd68/yd68.h b/keyboards/yd68/yd68.h
deleted file mode 100644
index 3303bd899e..0000000000
--- a/keyboards/yd68/yd68.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* Copyright 2018 Ryan "Izzy" Bales
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-#define XXX KC_NO
-
-/* This a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-/* YD68 ANSI layout
-   * ,----------------------------------------------------------------.
-   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c|  0e   | 48 |
-   * |----------------------------------------------------------------|
-   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d | 1e |
-   * |----------------------------------------------------------------|
-   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b|  2d   | 2e |
-   * |----------------------------------------------------------------|
-   * | 30     | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|  3c  | 3d| 3e |
-   * |----------------------------------------------------------------|
-   * | 40 | 41 | 42 |            46         | 49| 4a|  4b| 4c| 4d| 4e |
-   * `----------------------------------------------------------------'
- */
-// The first section contains all of the arguments
-// The second converts the arguments into a two-dimensional array
-
-#define LAYOUT_ansi( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, k48, \
-    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
-    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B,      k2D, k2E, \
-    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
-    k40, k41, k42,                k46,           k49, k4A, k4B, k4C, k4D, k4E \
-) { \
-    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, XXX, k0E }, \
-    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
-    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, k2E }, \
-    { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \
-    { k40, k41, k42, XXX, XXX, XXX, k46, XXX, k48, k49, k4A, k4B, k4C, k4D, k4E } \
-}