2020 November 28 Breaking Changes Update (#11053)

* Branch point for 2020 November 28 Breaking Change                                                

* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)                                           

* Add support for soft serial to ATmega32U2 (#10204)                                               

* Change MIDI velocity implementation to allow direct control of velocity value (#9940)            

* Add ability to build a subset of all keyboards based on platform.                                

* Actually use eeprom_driver_init().                                                               

* Make bootloader_jump weak for ChibiOS. (#10417)                                                  

* Joystick 16-bit support (#10439)                                                                 

* Per-encoder resolutions (#10259)                                                                 

* Share button state from mousekey to pointing_device (#10179)                                     

* Add hotfix for chibios keyboards not wake (#10088)                                               

* Add advanced/efficient RGB Matrix Indicators (#8564)                                             

* Naming change.                                                                                   

* Support for STM32 GPIOF,G,H,I,J,K (#10206)                                                       

* Add milc as a dependency and remove the installed milc (#10563)                                  

* ChibiOS upgrade: early init conversions (#10214)                                                 

* ChibiOS upgrade: configuration file migrator (#9952)                                             

* Haptic and solenoid cleanup (#9700)                                                              

* XD75 cleanup (#10524)                                                                            

* OLED display update interval support (#10388)                                                    

* Add definition based on currently-selected serial driver. (#10716)                               

* New feature: Retro Tapping per key (#10622)                                                      

* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)             

* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)

* Rescale both ChibiOS and AVR backlighting.                                                       

* Reduce Helix keyboard build variation (#8669)                                                    

* Minor change to behavior allowing display updates to continue between task ticks (#10750)        

* Some GPIO manipulations in matrix.c change to atomic. (#10491)                                   

* qmk cformat (#10767)                                                                             

* [Keyboard] Update the Speedo firmware for v3.0 (#10657)                                          

* Maartenwut/Maarten namechange to evyd13/Evy (#10274)                                             

* [quantum] combine repeated lines of code (#10837)                                                

* Add step sequencer feature (#9703)                                                               

* aeboards/ext65 refactor (#10820)                                                                 

* Refactor xelus/dawn60 for Rev2 later (#10584)                                                    

* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)                                 

* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)                                    

* update chibios os usb for the otg driver (#8893)                                                 

* Remove HD44780 References, Part 4 (#10735)                                                       

* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)                                                

* Fix cursor position bug in oled_write_raw functions (#10800)                                     

* Fixup version.h writing when using SKIP_VERSION=yes (#10972)                                     

* Allow for certain code in the codebase assuming length of string. (#10974)                       

* Add AT90USB support for serial.c (#10706)                                                        

* Auto shift: support repeats and early registration (#9826)                                       

* Rename ledmatrix.h to match .c file (#7949)                                                      

* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)                                        

* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)                                        

* Merge point for 2020 Nov 28 Breaking Change                                                      

4 files changed, 246 insertions, 0 deletions

diff --git a/keyboards/xelus/dawn60/rev1/config.h b/keyboards/xelus/dawn60/rev1/config.h
new file mode 100644
index 0000000000..375bea9486
--- /dev/null
+++ b/keyboards/xelus/dawn60/rev1/config.h
@@ -0,0 +1,143 @@
+/* Copyright 2020 Harrison Chan (Xelus)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+// USB Device descriptor parameter
+#define VENDOR_ID       0x5845 // XE
+#define PRODUCT_ID      0x0060 // Dawn60
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Xelus
+#define PRODUCT         Dawn60
+// key matrix size
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+//no underglow - prototype
+//#define MATRIX_ROW_PINS { B1, B3, B7, F6, F7 }
+//#define MATRIX_COL_PINS { B0, D5, B2, F5, D2, D3, D4, D6, D7, B4, B5, B6, C6, C7 }
+//#define UNUSED_PINS
+
+//underglow
+#define MATRIX_ROW_PINS { B1, B3, F1, F6, F7 }
+#define MATRIX_COL_PINS { B0, D5, B2, F5, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
+#define UNUSED_PINS
+
+// IS31FL3731 driver
+#define DRIVER_COUNT 2
+#define DRIVER_LED_TOTAL 64
+
+// COL2ROW or ROW2COL
+#define DIODE_DIRECTION COL2ROW
+
+// Set 0 if debouncing isn't needed
+#define DEBOUNCE 5
+
+// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
+#define LOCKING_SUPPORT_ENABLE
+// Locking resynchronize hack
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+// disable debug print
+//#define NO_DEBUG
+
+// disable print
+//#define NO_PRINT
+
+// disable action features
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+// This conditionally compiles the backlight code for Dawn60 specifics
+#define RGB_BACKLIGHT_DAWN60
+
+//RGB Underglow defines
+#define RGB_DI_PIN F0
+#define WS2812_LED_TOTAL 20
+
+#define RGB_UNDERGLOW_ALPHA_TOP_START 0
+#define RGB_UNDERGLOW_ALPHA_TOP_END   6   
+#define RGB_UNDERGLOW_ALPHA_BOT_START 12
+#define RGB_UNDERGLOW_ALPHA_BOT_END   15
+
+// enable/disable LEDs based on layout
+// switch between split backspace (1) or normal backspace(0)
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1
+// switch between Tsangan (1) or Arrows Bottom Row (0)
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+// switch between standard split rshift (0) or arrows r shift (1)
+// .------------------.           .-------------------.
+// | ? |  Shift  | Fn |    vs     |  Shift  | Up | Fn |
+// `------------------'           `-------------------'
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
+
+//not used
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define RGB_BACKLIGHT_BRIGHTNESS 255
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 255
+
+// the default effect speed (0-3)
+#define RGB_BACKLIGHT_EFFECT_SPEED 0
+
+// the default color1 and color2
+#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
+#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0010000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011111000011111
+
+#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+
+// Backlight config starts after VIA's EEPROM usage,
+// dynamic keymaps start after this.
+#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
+
+// VIA lighting is handled by the keyboard-level code
+#define VIA_CUSTOM_LIGHTING_ENABLE
diff --git a/keyboards/xelus/dawn60/rev1/rev1.c b/keyboards/xelus/dawn60/rev1/rev1.c
new file mode 100644
index 0000000000..2d0b465bcc
--- /dev/null
+++ b/keyboards/xelus/dawn60/rev1/rev1.c
@@ -0,0 +1,18 @@
+/* Copyright 2020 Harrison Chan (Xelus)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef RGB_BACKLIGHT_DAWN60
+#error RGB_BACKLIGHT_DAWN60 not defined, you done goofed somehao, brah
+#endif
diff --git a/keyboards/xelus/dawn60/rev1/rev1.h b/keyboards/xelus/dawn60/rev1/rev1.h
new file mode 100644
index 0000000000..53d40e5499
--- /dev/null
+++ b/keyboards/xelus/dawn60/rev1/rev1.h
@@ -0,0 +1,36 @@
+/* Copyright 2020 Harrison Chan (Xelus)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+#include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
+#include "via.h"
+
+#define XXX KC_NO
+
+#define LAYOUT_60_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2C, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39,      K3B, K3C, K3D, \
+    K40, K41, K42,           K45,                K49, K4A, K4B, K4C, K4D  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, XXX, K3B, K3C, K3D }, \
+    { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, K49, K4A, K4B, K4C, K4D }  \
+}
diff --git a/keyboards/xelus/dawn60/rev1/rules.mk b/keyboards/xelus/dawn60/rev1/rules.mk
new file mode 100644
index 0000000000..3ac5f9977d
--- /dev/null
+++ b/keyboards/xelus/dawn60/rev1/rules.mk
@@ -0,0 +1,49 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. - We have custom RGB underglow
+
+CIE1931_CURVE = yes
+
+
+# project specific files
+SRC +=	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
+		quantum/color.c \
+		drivers/issi/is31fl3731.c \
+		ws2812.c
+
+QUANTUM_LIB_SRC += i2c_master.c