Organize KPrepublic, K.T.E.C, xiudi boards into directories (#12159)

* reset; redoing my steps; and recommit

* include xd002/.noci

1 files changed, 0 insertions, 136 deletions

diff --git a/keyboards/xd84/dev.md b/keyboards/xd84/dev.md
deleted file mode 100644
index 536b01d06b..0000000000
--- a/keyboards/xd84/dev.md
+++ /dev/null
@@ -1,136 +0,0 @@
-# XD84
-
-Development docs covering the following:
-- Kimera core
-- RGB
-- Backlight
-- Light Through Cat
-
-## Kimera core
-![Kimera core](https://gd2.alicdn.com/imgextra/i4/159916802/TB2qsIgdrJkpuFjy1zcXXa5FFXa_!!159916802.jpg)
-
-What little available info that was available for the qmk port
-- atmega32u4 16Mhz
-  - board seems to have a 6Mhz crystal 
-- 2x PCA9555 I2C IO expander
-
-Links:
-- [Schematic, BOM, Gerbers](/kairyu/kimera/blob/master/kimera_core)
-- [Original firmware](https://github.com/kairyu/tmk_keyboard_custom/tree/master/keyboard/kimera)
-
-```c
-/*
-Kimera_core_v1.0 Components
-
-             U1 (atmega32u4)
-           ,----------------.
-      TX --| TX0(PD3)   RAW |--
-      RX --| RX1(PD2)   GND |--
-         --| GND      RESET |-- RST
-         --| GND        VCC |--
-     SDA --| 2(PD1) (PF4)A3 |--
-     SCL --| 3(PD0) (PF5)A2 |--
-   (INT) --| 4(PD4) (PF6)A1 |--
-         --| 5(PC6) (PF7)A0 |--
-         --| 6(PD7) (PB1)15 |-- SCK
-    LED2 --| 7(PE6) (PB3)14 |-- MISO
-    LED1 --| 8(PB4) (PB2)16 |-- MOSI
-    LED3 --| 9(PB5) (PB6)10 |-- LED4
-          `----------------'
-
-         IC1 (PCA9555)                  IC2 (PCA9555)
-         ,----------.                   ,----------.
-   SDA --| SDA  P00 |-- P1        SDA --| SDA  P00 |-- P17
-   SCL --| SCL  P01 |-- P2        SCL --| SCL  P01 |-- P18
-   INT --| INT  P02 |-- P3        INT --| INT  P02 |-- P19
-         |      P03 |-- P4              |      P03 |-- P20
-   GND --| A0   P04 |-- P5        VCC --| A0   P04 |-- P21
-   SJ1 --| A1   P05 |-- P6        SJ1 --| A1   P05 |-- P22
-   SJ2 --| A2   P06 |-- P7        SJ2 --| A2   P06 |-- P23
-         |      P07 |-- P8              |      P07 |-- P24
-         |          |                   |          |
-         |      P10 |-- P9              |      P10 |-- P25
-         |      P11 |-- P10             |      P11 |-- P26
-         |      P12 |-- P11             |      P12 |-- P27
-         |      P13 |-- P12             |      P13 |-- P28
-         |      P14 |-- P13             |      P14 |-- P29
-         |      P15 |-- P14             |      P15 |-- P30
-         |      P16 |-- P15             |      P16 |-- P31
-         |      P17 |-- P16             |      P17 |-- P32
-         `----------'                   `----------'
-*/
-
-```
-
-### Bootloader
-Default bootloader is `atmel-dfu`.
-Reboot to bootloader via magnetic switch next to icsp header.
-Flash using regular dfu methods.
-
-### XD84 pin mappings
-Taken from [kimera-config.json](https://github.com/kairyu/tkg/blob/master/keyboard/config/kimera-config.json)
-
-	"row_mapping": [ 1, 2, 3, 4, 5, 6 ],
-	"col_mapping": [ 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 ],
-
-# RGB
-- PIN C7
-- Number of RGB LED 7
-
-# Backlight
-- PIN B6
-
-# Light Through Cat
-    TODO - PWM C6
-
-## Assumptions
-### Pin/Port mappings
-- All cols are on the same IC
-- All rows are on the same IC and port
-- Pins mapped sequentially
-- Each port only does row or column not a mixture of both
-  - No need to have complex port config
-  - 
-
-| ROW index | Kimera Pin | PCA9555           |
-| ----------|------------|-------------------|
-| 0         | 1          | IC1 Port 0  pin 0 |
-| 1         | 2          | IC1 Port 0  pin 1 |
-| 2         | 3          | IC1 Port 0  pin 2 |
-| 3         | 4          | IC1 Port 0  pin 3 |
-| 4         | 5          | IC1 Port 0  pin 4 |
-| 5         | 6          | IC1 Port 0  pin 5 |
-
-- Safe enough to assume `row_index == pin`
-
-
-| COL index | Kimera Pin | PCA9555           |
-| ----------|------------|-------------------|
-| 0         | 17         | IC2 Port 0  pin 0 |
-| 1         | 18         | IC2 Port 0  pin 1 |
-| 2         | 19         | IC2 Port 0  pin 2 |
-| 3         | 20         | IC2 Port 0  pin 3 |
-| 4         | 21         | IC2 Port 0  pin 4 |
-| 5         | 22         | IC2 Port 0  pin 5 |
-| 6         | 23         | IC2 Port 0  pin 6 |
-| 7         | 24         | IC2 Port 0  pin 7 |
-| 8         | 25         | IC2 Port 1  pin 0 |
-| 9         | 26         | IC2 Port 1  pin 1 |
-| 10        | 27         | IC2 Port 1  pin 2 |
-| 11        | 28         | IC2 Port 1  pin 3 |
-| 12        | 29         | IC2 Port 1  pin 4 |
-| 13        | 30         | IC2 Port 1  pin 5 |
-| 14        | 31         | IC2 Port 1  pin 6 |
-
-- Safe enough to assume here col_index does not need to be converted to pin
-- Reading both ports one after the other gives us the same sequential behavior
-  - maps to the usual practice of reading matrix columns
-  - while this technically gives 16 column reads, the 16th column can never be set so is safely ignored
-
-## Notes
-[pca9555 datasheet](https://www.ti.com/lit/ds/symlink/pca9555.pdf)
-
-- Other Kimera based boards with non sequential pin mappings, pins mapped across ICs, or mixed row/col configs will need more complicated `pin -> i2c_addr,port,pin` logic as well as rather more complex pin functions.
-
-## Return to stock firmware
-Not tested but original firmware seems to be available in the [kairyu/tkg-firmware](https://github.com/kairyu/tkg-firmware/blob/master/kimera-core.hex) repo.