2020 February 29 Breaking Changes Update (#8064)

2 files changed, 191 insertions, 14 deletions

diff --git a/keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.c b/keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.c
index 9d10fbd754..7c09bd997c 100644
--- a/keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.c
+++ b/keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.c
@@ -1,5 +1,5 @@
 /*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -20,14 +20,76 @@
  */
 
 #include "hal.h"
+#include "stm32_gpio.h"
+
+/*===========================================================================*/
+/* Driver local definitions.                                                 */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables.                                                */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types.                                         */
+/*===========================================================================*/
+
+/**
+ * @brief   Type of STM32 GPIO port setup.
+ */
+typedef struct {
+  uint32_t              moder;
+  uint32_t              otyper;
+  uint32_t              ospeedr;
+  uint32_t              pupdr;
+  uint32_t              odr;
+  uint32_t              afrl;
+  uint32_t              afrh;
+} gpio_setup_t;
+
+/**
+ * @brief   Type of STM32 GPIO initialization data.
+ */
+typedef struct {
+#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
+  gpio_setup_t          PAData;
+#endif
+#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
+  gpio_setup_t          PBData;
+#endif
+#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
+  gpio_setup_t          PCData;
+#endif
+#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
+  gpio_setup_t          PDData;
+#endif
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+  gpio_setup_t          PEData;
+#endif
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+  gpio_setup_t          PFData;
+#endif
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+  gpio_setup_t          PGData;
+#endif
+#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
+  gpio_setup_t          PHData;
+#endif
+#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
+  gpio_setup_t          PIData;
+#endif
+#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
+  gpio_setup_t          PJData;
+#endif
+#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
+  gpio_setup_t          PKData;
+#endif
+} gpio_config_t;
 
-#if HAL_USE_PAL || defined(__DOXYGEN__)
 /**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
+ * @brief   STM32 GPIO static initialization data.
  */
-const PALConfig pal_default_config = {
+static const gpio_config_t gpio_default_config = {
 #if STM32_HAS_GPIOA
   {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
    VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
@@ -62,23 +124,118 @@ const PALConfig pal_default_config = {
 #endif
 #if STM32_HAS_GPIOI
   {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH},
+#endif
+#if STM32_HAS_GPIOJ
+  {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
+   VAL_GPIOJ_ODR,   VAL_GPIOJ_AFRL,   VAL_GPIOJ_AFRH},
+#endif
+#if STM32_HAS_GPIOK
+  {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
+   VAL_GPIOK_ODR,   VAL_GPIOK_AFRL,   VAL_GPIOK_AFRH}
 #endif
 };
+
+/*===========================================================================*/
+/* Driver local functions.                                                   */
+/*===========================================================================*/
+
+static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
+
+  gpiop->OTYPER  = config->otyper;
+  gpiop->OSPEEDR = config->ospeedr;
+  gpiop->PUPDR   = config->pupdr;
+  gpiop->ODR     = config->odr;
+  gpiop->AFRL    = config->afrl;
+  gpiop->AFRH    = config->afrh;
+  gpiop->MODER   = config->moder;
+}
+
+static void stm32_gpio_init(void) {
+
+  /* Enabling GPIO-related clocks, the mask comes from the
+     registry header file.*/
+  rccResetAHB(STM32_GPIO_EN_MASK);
+  rccEnableAHB(STM32_GPIO_EN_MASK, true);
+
+  /* Initializing all the defined GPIO ports.*/
+#if STM32_HAS_GPIOA
+  gpio_init(GPIOA, &gpio_default_config.PAData);
+#endif
+#if STM32_HAS_GPIOB
+  gpio_init(GPIOB, &gpio_default_config.PBData);
 #endif
+#if STM32_HAS_GPIOC
+  gpio_init(GPIOC, &gpio_default_config.PCData);
+#endif
+#if STM32_HAS_GPIOD
+  gpio_init(GPIOD, &gpio_default_config.PDData);
+#endif
+#if STM32_HAS_GPIOE
+  gpio_init(GPIOE, &gpio_default_config.PEData);
+#endif
+#if STM32_HAS_GPIOF
+  gpio_init(GPIOF, &gpio_default_config.PFData);
+#endif
+#if STM32_HAS_GPIOG
+  gpio_init(GPIOG, &gpio_default_config.PGData);
+#endif
+#if STM32_HAS_GPIOH
+  gpio_init(GPIOH, &gpio_default_config.PHData);
+#endif
+#if STM32_HAS_GPIOI
+  gpio_init(GPIOI, &gpio_default_config.PIData);
+#endif
+#if STM32_HAS_GPIOJ
+  gpio_init(GPIOJ, &gpio_default_config.PJData);
+#endif
+#if STM32_HAS_GPIOK
+  gpio_init(GPIOK, &gpio_default_config.PKData);
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers.                                                */
+/*===========================================================================*/
 
-void enter_bootloader_mode_if_requested(void);
+/*===========================================================================*/
+/* Driver exported functions.                                                */
+/*===========================================================================*/
 
 /**
  * @brief   Early initialization code.
- * @details This initialization must be performed just after stack setup
- *          and before any other initialization.
+ * @details GPIO ports and system clocks are initialized before everything
+ *          else.
  */
 void __early_init(void) {
+  extern void enter_bootloader_mode_if_requested(void);
   enter_bootloader_mode_if_requested();
+  stm32_gpio_init();
   stm32_clock_init();
 }
 
+#if HAL_USE_SDC || defined(__DOXYGEN__)
+/**
+ * @brief   SDC card detection.
+ */
+bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   SDC card write protection detection.
+ */
+bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif /* HAL_USE_SDC */
+
 #if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
 /**
  * @brief   MMC_SPI card detection.
@@ -106,4 +263,6 @@ bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
  * @todo    Add your board-specific code, if any.
  */
 void boardInit(void) {
+  SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
+  SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
 }
diff --git a/keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.h b/keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.h
index de3a93d1ce..57636d1f12 100644
--- a/keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.h
+++ b/keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.h
@@ -22,6 +22,10 @@
 #ifndef BOARD_H
 #define BOARD_H
 
+/*===========================================================================*/
+/* Driver constants.                                                         */
+/*===========================================================================*/
+
 /*
  * Setup for ST STM32F072B-Discovery board.
  */
@@ -166,11 +170,9 @@
 #define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
 #define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
 #define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
-
 #define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
 #define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
 #define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
-
 #define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
 #define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
 #define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
@@ -178,11 +180,24 @@
 #define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
 #define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
 #define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
+#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
+#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
 
+/*===========================================================================*/
+/* Driver pre-compile time settings.                                         */
+/*===========================================================================*/
 
+/*===========================================================================*/
+/* Derived constants and error checks.                                       */
+/*===========================================================================*/
 
-#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
-#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
+/*===========================================================================*/
+/* Driver data structures and types.                                         */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros.                                                            */
+/*===========================================================================*/
 
 /*
  * I/O ports initial setup, this configuration is established soon after reset
@@ -908,6 +923,9 @@
                                      PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \
                                      PIN_AFIO_AF(GPIOF_PIN15, 0U))
 
+/*===========================================================================*/
+/* External declarations.                                                    */
+/*===========================================================================*/
 
 #if !defined(_FROM_ASM_)
 #ifdef __cplusplus