Merge remote-tracking branch 'upstream/master'

* upstream/master: (1239 commits)
  Update ez.c
  removes planck/rev3 temporarily
  Move hand_swap_config to ez.c, removes error for infinity
  Update Makefile
  ergodox: Update algernon's keymap to v1.9
  Added VS Code dir to .gitignore
  Support the Pegasus Hoof controller.
  [Jack & Erez] Simplifies and documents TO
  add readme
  use wait_ms instead of _delay_ms
  add messenger
  init keymap
  Add example keymap
  Adding whiskey_tango_foxtrot_capslock ergodox keymap
  Unicode map framework. Allow unicode up to 0xFFFFF using separate mapping table
  CIE 1931 dim curve
  Apply the dim curve to the RGB output
  Update the Cluecard readme files
  Tune snake and knight intervals for Cluecard
  Tunable RGB light intervals
  ...

2 files changed, 174 insertions, 0 deletions

diff --git a/keyboards/planck/keymaps/mollat/Makefile b/keyboards/planck/keymaps/mollat/Makefile
new file mode 100644
index 0000000000..581e08cd02
--- /dev/null
+++ b/keyboards/planck/keymaps/mollat/Makefile
@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/planck/keymaps/mollat/keymap.c b/keyboards/planck/keymaps/mollat/keymap.c
new file mode 100644
index 0000000000..e7c71efd47
--- /dev/null
+++ b/keyboards/planck/keymaps/mollat/keymap.c
@@ -0,0 +1,149 @@
+//
+// This layout is based on the following needs:
+//
+// should be as close as possible to querty/us-international layout (using international/AltGr as o/s driver)
+// added german umlauts at known places from de-layout
+// all movement keys should be at known places from vi/bash (eg HJKL for cursor keys)
+// Fn layer (at CapsLock place like the Pok3r does) for missing keys
+// additional layer for tmux window switching
+//
+// This is work in Progress! If you have suggestions write me at github.com/mollat/qmk_firmware/ and check
+// this fork for updates as I probably won't bother jack with my pull requests frequently.
+//
+
+#include "planck.h"
+
+#define _QWERTY 0
+#define _HIGH 1
+#define _LOW 2
+#define _FN 3
+#define _TMUX 4
+#define _LCTL 5
+#define _MOUSE 6
+#define __________ KC_NO // just for easy reading
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_QWERTY] = { /* Qwerty */
+  { LT(_MOUSE, KC_ESC),KC_Q,KC_W,       KC_E,       KC_R,       KC_T,       KC_Y,       KC_U,       KC_I,       KC_O,       KC_P,       KC_BSPC    },
+  { LT(_FN, KC_TAB),KC_A,   KC_S,       KC_D,       KC_F,       KC_G,       KC_H,       KC_J,       KC_K,       KC_L,       KC_SCLN,    KC_QUOT    },
+  { KC_LSFT,    KC_Z,       KC_X,       KC_C,       KC_V,       KC_B,       KC_N,       KC_M,       KC_COMM,    KC_DOT,     KC_SLSH,    SFT_T(KC_ENT)},
+  { __________, __________, KC_LGUI,    KC_LALT,    KC_LCTL,LT(_TMUX, KC_SPC),LT(_HIGH, KC_SPC),MO(_LOW),KC_RALT,KC_RGUI,   __________, __________ }
+},
+
+// missing keys regarding to the form factor
+// keeping the dot and comma for typing faster IP addresses and (german) float values
+// putting the backslash on the slash's place
+[_HIGH] = {
+  { KC_GRV,     KC_EXLM,    KC_AT,      KC_HASH,    KC_DLR,     KC_PERC,    KC_CIRC,    KC_AMPR,    KC_ASTR,    KC_LPRN,    KC_RPRN,    KC_MINS    },
+  { __________, KC_1,       KC_2,       KC_3,       KC_4,       KC_5,       KC_6,       KC_7,       KC_8,       KC_9,       KC_0,       KC_EQL     },
+  { __________, __________, __________, __________, __________, __________, __________, __________, KC_COMM,    KC_DOT,     KC_BSLS,    LSFT(KC_BSLS)},
+  { __________, __________, __________, __________, __________, __________, KC_TRNS,    __________, __________, __________, __________, __________ }
+},
+
+// classic Fn-Layer triggered with 'CapsLock-key' like on Pok3r
+// SPC and ENT are doubled for using repeat (which I switched off, see https://github.com/tmk/tmk_keyboard/issues/287)
+// '€' sign is on the '5' position as this is the usual AltGr place on the US Internation layout
+// home/end at the 'a' and 'e' position like in bash
+// ins at 'i'
+// del besides backspace (had no better place for it because of the umlauts)
+// pg-down at 'f' (forward in vi), pg-up at 'b' (back in 'vi')
+//
+[_FN] = {
+  { __________, __________, __________, KC_END,     __________, __________, __________, __________, KC_INS,     __________, KC_DEL,     RALT(KC_Y) },
+  { KC_TRNS,    __________, RALT(KC_S), __________, KC_PGDN,    RALT(KC_5), KC_LEFT,    KC_DOWN,    KC_UP,      KC_RGHT,    RALT(KC_P), RALT(KC_Q) },
+  { __________, KC_HOME,    __________, __________, __________, KC_PGUP,    __________, __________, __________, __________, __________, KC_ENT     },
+  { RESET,      __________, __________, __________, __________, KC_SPC,     KC_SPC,     __________, __________, __________, __________, __________ }
+},
+
+// function key layer and some shift + (missing key at the small form factor)
+[_LOW] = {
+  { KC_TILD,    __________, __________, __________, __________, __________, __________, __________, __________, KC_LCBR,    KC_RCBR,    KC_UNDS    },
+  { __________, KC_F1,      KC_F2,      KC_F3,      KC_F4,      KC_F5,      KC_F6,      KC_F7,      KC_F8,      KC_LBRC,    KC_RBRC,    KC_PLUS    },
+  { __________, __________, __________, __________, __________, KC_F9,      KC_F10,     KC_F11,     KC_F12,     __________, __________, __________ },
+  { __________, __________, __________, __________, __________, __________, __________, KC_TRNS,    __________, __________, __________, __________ }
+},
+
+// most macros will switch tmux screens
+// two macros are for vi's save/quit at 'w' and 'q'
+[_TMUX] = {
+  { __________, M(14),      M(13),      __________, __________, __________, __________, __________, __________, __________, M(11),      __________ },
+  { M(0),       M(1),       M(2),       M(3),       M(4),       M(5),       M(6),       M(7),       M(8),       M(9),       __________, __________ },
+  { __________, __________, __________, M(12),      __________, __________, M(10),      __________, __________, __________, __________, __________ },
+  { __________, __________, __________, __________, __________, KC_TRNS,    __________, __________, __________, __________, __________, __________ }
+},
+
+// mouse movement can be improved (e.g. can't press hj at once), but I will use this seldom, so I stick with hjkl keys.
+[_MOUSE] = {
+  { KC_TRNS,    __________, __________, __________, __________, __________, __________, __________, __________, __________, __________, __________ },
+  { __________, __________, __________, __________, KC_WH_D,    __________, KC_MS_L,    KC_MS_D,    KC_MS_U,    KC_MS_R,    __________, __________ },
+  { __________, __________, __________, __________, __________, KC_WH_U,    __________, __________, __________, __________, __________, __________ },
+  { __________, __________, __________, KC_ACL2,    KC_ACL1,    KC_ACL0,    KC_MS_BTN1, KC_MS_BTN3, KC_MS_BTN2, __________, __________, __________ }
+}
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [_LCTL] = ACTION_MODS_TAP_KEY(KC_LCTL, M(12)),    // does not work
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case 0:
+          return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_0), END );
+          break;
+        case 1:
+          return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_1), END );
+          break;
+        case 2:
+          return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_2), END );
+          break;
+        case 3:
+          return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_3), END );
+          break;
+        case 4:
+          return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_4), END );
+          break;
+        case 5:
+          return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_5), END );
+          break;
+        case 6:
+          return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_6), END );
+          break;
+        case 7:
+          return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_7), END );
+          break;
+        case 8:
+          return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_8), END );
+          break;
+        case 9:
+          // tmux last window
+          return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_L), END );
+          break;
+          // tmux next window
+        case 10:
+          return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_N), END );
+          break;
+          // tmux previous window
+        case 11:
+          return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_P), END );
+          break;
+          // tmux new window
+        case 12:
+          return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_C), END );
+          break;
+        case 13:
+          // vi save document
+          return MACRODOWN( TYPE(KC_ESC), DOWN(KC_LSFT), TYPE(KC_SCLN), UP(KC_LSFT), TYPE(KC_W), TYPE(KC_ENT), END );
+          break;
+        case 14:
+          // vi quit
+          return MACRODOWN( TYPE(KC_ESC), DOWN(KC_LSFT), TYPE(KC_SCLN), UP(KC_LSFT), TYPE(KC_Q), TYPE(KC_ENT), END );
+          break;
+          // tmux press ctrl-b
+        case 15:
+          return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), END );
+          break;
+      }
+    return MACRO_NONE;
+};