diff options
| author | Maarten Dekkers <maartenwut@gmail.com> | 2019-08-06 05:12:06 +0200 |
|---|---|---|
| committer | noroadsleft <18669334+noroadsleft@users.noreply.github.com> | 2019-08-05 20:12:06 -0700 |
| commit | 209b6baaa8fd49d5df34e0c10da8930e3271e5f1 (patch) | |
| tree | 30997bc459cc1d847dcd2a166d3baf086266a1ee /keyboards/plain60/rules.mk | |
| parent | 7f8922ae7bc6c52bd22d3953b8eda9e87c664cf9 (diff) | |
Move maartenwut's keyboards to one folder (#6484)
Diffstat (limited to 'keyboards/plain60/rules.mk')
| -rw-r--r-- | keyboards/plain60/rules.mk | 68 |
1 files changed, 0 insertions, 68 deletions
diff --git a/keyboards/plain60/rules.mk b/keyboards/plain60/rules.mk deleted file mode 100644 index da9cb9fbd4..0000000000 --- a/keyboards/plain60/rules.mk +++ /dev/null @@ -1,68 +0,0 @@ -SRC += keyboards/wilba_tech/wt_main.c -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes - -LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_hhkb 60_iso |