Dactyl qmk layout

6 files changed, 272 insertions, 0 deletions

diff --git a/keyboards/orbekk_dactyl/config.h b/keyboards/orbekk_dactyl/config.h
new file mode 100644
index 0000000000..cb82ae5022
--- /dev/null
+++ b/keyboards/orbekk_dactyl/config.h
@@ -0,0 +1,40 @@
+// Copyright 2023 KJ Orbekk (@orbekk)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+#define SERIAL_USART_FULL_DUPLEX   //Enable full duplex operation mode.
+#define SERIAL_USART_TX_PIN GP0
+#define SERIAL_USART_RX_PIN GP1
+
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 500U
+
+#define MASTER_LEFT
+
+// Don't send keyboard macros too fast.
+#define TAP_CODE_DELAY 12
+
+#define ACHORDION_STREAK
+
+#define TAPPING_TERM_MS 200
+#define PERMISSIVE_HOLD
+
+#define TRI_LAYER_LOWER_LAYER 4  // LOW
+#define TRI_LAYER_UPPER_LAYER 5  // RAISE
+#define TRI_LAYER_ADJUST_LAYER 7  // FN
diff --git a/keyboards/orbekk_dactyl/info.json b/keyboards/orbekk_dactyl/info.json
new file mode 100644
index 0000000000..52306be242
--- /dev/null
+++ b/keyboards/orbekk_dactyl/info.json
@@ -0,0 +1,81 @@
+{
+    "manufacturer": "KJ Orbekk",
+    "keyboard_name": "orbekk_dactyl",
+    "maintainer": "orbekk",
+    "bootloader": "rp2040",
+    "diode_direction": "COL2ROW",
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true
+    },
+    "matrix_pins": {
+        # Right
+        #"cols": ["GP5" "GP6" "GP7" "GP8" "GP9"],
+        # Left
+        "cols": ["GP4" "GP6" "GP7" "GP8" "GP9"],
+        "rows": ["GP21" "GP23" "GP20" "GP22"]
+    },
+    "split": {
+        "enabled": true
+    }
+    "processor": "RP2040",
+    "url": "",
+    "usb": {
+        "device_version": "1.0.0",
+        "pid": "0x0000",
+        "vid": "0xFEED"
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 1], "x": 1, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 3], "x": 3, "y": 0},
+                {"matrix": [0, 4], "x": 4, "y": 0},
+
+                {"matrix": [4, 4], "x": 5, "y": 0},
+                {"matrix": [4, 3], "x": 6, "y": 0},
+                {"matrix": [4, 2], "x": 7, "y": 0},
+                {"matrix": [4, 1], "x": 8, "y": 0},
+                {"matrix": [4, 0], "x": 9, "y": 0},
+
+                {"matrix": [1, 0], "x": 0, "y": 1},
+                {"matrix": [1, 1], "x": 1, "y": 1},
+                {"matrix": [1, 2], "x": 2, "y": 1},
+                {"matrix": [1, 3], "x": 3, "y": 1},
+                {"matrix": [1, 4], "x": 4, "y": 1},
+
+                {"matrix": [5, 4], "x": 5, "y": 1},
+                {"matrix": [5, 3], "x": 6, "y": 1},
+                {"matrix": [5, 2], "x": 7, "y": 1},
+                {"matrix": [5, 1], "x": 8, "y": 1},
+                {"matrix": [5, 0], "x": 9, "y": 1},
+
+                {"matrix": [2, 0], "x": 0, "y": 2},
+                {"matrix": [2, 1], "x": 1, "y": 2},
+                {"matrix": [2, 2], "x": 2, "y": 2},
+                {"matrix": [2, 3], "x": 3, "y": 2},
+                {"matrix": [2, 4], "x": 4, "y": 2},
+
+                {"matrix": [6, 4], "x": 5, "y": 2},
+                {"matrix": [6, 3], "x": 6, "y": 2},
+                {"matrix": [6, 2], "x": 7, "y": 2},
+                {"matrix": [6, 1], "x": 8, "y": 2},
+                {"matrix": [6, 0], "x": 9, "y": 2},
+
+                {"matrix": [3, 1], "x": 0, "y": 3},
+                {"matrix": [3, 3], "x": 1, "y": 3},
+                {"matrix": [3, 4], "x": 2, "y": 3}
+
+                {"matrix": [7, 4], "x": 3, "y": 3},
+                {"matrix": [7, 3], "x": 4, "y": 3},
+                {"matrix": [7, 1], "x": 4, "y": 3}
+            ]
+        }
+    }
+}
diff --git a/keyboards/orbekk_dactyl/keymaps/default/keymap.c b/keyboards/orbekk_dactyl/keymaps/default/keymap.c
new file mode 100644
index 0000000000..586dfbfaa1
--- /dev/null
+++ b/keyboards/orbekk_dactyl/keymaps/default/keymap.c
@@ -0,0 +1,100 @@
+#include QMK_KEYBOARD_H
+#include "layout.h"
+
+// Based on:
+// https://github.com/getreuer/qmk-keymap/blob/main/keymap.c
+
+enum layers {
+    GR,  // Graphite
+    DV,  // Dvorak
+    QW,  // Qwerty (intended for typing in dvorak mode)
+    GAMING,
+    LOW,
+    RAISE,
+    NAV,
+    FN,
+};
+
+#define HL_1(kc) LGUI_T(kc)
+#define HL_2(kc) LALT_T(kc)
+#define HL_3(kc) LCTL_T(kc)
+#define HL_4(kc) LSFT_T(kc)
+#define HR_1(kc) LGUI_T(kc)
+#define HR_2(kc) LALT_T(kc)
+#define HR_3(kc) LCTL_T(kc)
+#define HR_4(kc) LSFT_T(kc)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [GR] = LAYOUT_LR(
+                     KC_B, KC_L, KC_D, KC_W, KC_Z,
+                     HL_1(KC_N), HL_2(KC_R), HL_3(KC_T), HL_4(KC_S), KC_G,
+                     KC_Q, KC_X, KC_M, KC_C, KC_V,
+                     TL_LOWR, LT(NAV, KC_SPC),
+
+                     KC_QUOT, KC_F, KC_O, KC_U, KC_J,
+                     KC_Y, HR_4(KC_H), HR_3(KC_A), HR_2(KC_E), HR_1(KC_I),
+                     KC_K, KC_P, KC_DOT, KC_MINUS, KC_SLASH,
+                     KC_LSFT, TL_UPPR
+                     ),
+
+    [DV] = LAYOUT_LR(
+                     KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y,
+                     HL_1(KC_A), HL_2(KC_O), HL_3(KC_E), HL_4(KC_U), KC_I,
+                     KC_SCLN, KC_Q, KC_J, KC_K, KC_X,
+                     KC_TRNS, KC_TRNS,
+
+                     KC_F, KC_G, KC_C, KC_R, KC_L,
+                     KC_D, HR_4(KC_H), HR_3(KC_T), HR_2(KC_N), HR_1(KC_S),
+                     KC_B, KC_M, KC_W, KC_V, KC_Z,
+                     KC_TRNS, KC_TRNS
+                     ),
+
+    [LOW] = LAYOUT_LR(
+                      KC_EXLM, KC_AT, KC_HASH, KC_DOLLAR, KC_PERCENT,
+                      KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, KC_BACKSLASH,
+                      KC_GRAVE, KC_TILDE, KC_TAB, KC_ESC, KC_PIPE,
+                      KC_TRNS, KC_TRNS,
+
+                      KC_CIRC, KC_AMPERSAND, KC_ASTERISK, KC_LPRN, KC_RPRN,
+                      KC_SLASH, KC_UNDERSCORE, KC_PLUS, KC_LCBR, KC_RCBR,
+                      KC_QUESTION, KC_MINUS, KC_EQUAL, KC_LBRC, KC_RBRC,
+                      KC_TRNS, KC_TRNS
+                      ),
+
+    [RAISE] = LAYOUT_LR(
+                        KC_1, KC_2, KC_3, KC_4, KC_5,
+                        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                        KC_TRNS, KC_TRNS,
+
+                        KC_6, KC_7, KC_8, KC_9, KC_0,
+                        KC_BSPC, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI,
+                        KC_DEL, KC_ENTER, KC_COMMA, KC_SEMICOLON, KC_COLON,
+                        KC_TRNS, KC_TRNS
+                        ),
+
+    [FN] = LAYOUT_LR(
+                     KC_F1, KC_F2, KC_F3, KC_F4, KC_F5,
+                     KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS,
+                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                     KC_TRNS, KC_TRNS,
+
+                     KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
+                     KC_TRNS, TO(GR), TO(DV), TO(QW), TO(GAMING),
+                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, QK_BOOT,
+                     KC_TRNS, KC_TRNS
+                     ),
+
+    [NAV] = LAYOUT_LR(
+                      KC_BTN4, KC_BTN3, KC_UP, KC_BTN1, KC_BTN2,
+                      KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGUP,
+                      KC_HOME, KC_WH_D, KC_WH_U, KC_END, KC_PGDN,
+                      KC_TRNS, KC_TRNS,
+
+                      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                      KC_TRNS, KC_TRNS
+                      ),
+
+};
diff --git a/keyboards/orbekk_dactyl/keymaps/default/layout.h b/keyboards/orbekk_dactyl/keymaps/default/layout.h
new file mode 100644
index 0000000000..cb5fea86d6
--- /dev/null
+++ b/keyboards/orbekk_dactyl/keymaps/default/layout.h
@@ -0,0 +1,19 @@
+#pragma once
+
+#include QMK_KEYBOARD_H
+
+#define LAYOUT_LR(                                    \
+LA0, LA1, LA2, LA3, LA4,                              \
+LB0, LB1, LB2, LB3, LB4,                              \
+LC0, LC1, LC2, LC3, LC4,                              \
+LT0, LT1,                                             \
+RA0, RA1, RA2, RA3, RA4,                              \
+RB0, RB1, RB2, RB3, RB4,                              \
+RC0, RC1, RC2, RC3, RC4,                              \
+RT0, RT1                                              \
+) LAYOUT(                                             \
+LA0, LA1, LA2, LA3, LA4, RA0, RA1, RA2, RA3, RA4,     \
+LB0, LB1, LB2, LB3, LB4, RB0, RB1, RB2, RB3, RB4,     \
+LC0, LC1, LC2, LC3, LC4, RC0, RC1, RC2, RC3, RC4,     \
+LT0, LT1, KC_NO, KC_NO, RT0, RT1                      \
+)
diff --git a/keyboards/orbekk_dactyl/readme.md b/keyboards/orbekk_dactyl/readme.md
new file mode 100644
index 0000000000..9a72c9bc5b
--- /dev/null
+++ b/keyboards/orbekk_dactyl/readme.md
@@ -0,0 +1,29 @@
+# orbekk_dactyl
+
+https://docs.qmk.fm/#/porting_your_keyboard_to_qmk
+
+![orbekk_dactyl](imgur.com image replace me!)
+
+*A short description of the keyboard/project*
+
+* Keyboard Maintainer: [KJ Orbekk](https://github.com/orbekk)
+* Hardware Supported: *The PCBs, controllers supported*
+* Hardware Availability: *Links to where you can find this hardware*
+
+Make example for this keyboard (after setting up your build environment):
+
+    make orbekk_dactyl:default
+
+Flashing example for this keyboard:
+
+    make orbekk_dactyl:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/orbekk_dactyl/rules.mk b/keyboards/orbekk_dactyl/rules.mk
new file mode 100644
index 0000000000..ebbd33e000
--- /dev/null
+++ b/keyboards/orbekk_dactyl/rules.mk
@@ -0,0 +1,3 @@
+# This file intentionally left blank
+SERIAL_DRIVER = vendor
+TRI_LAYER_ENABLE = yes