Merge remote-tracking branch 'upstream/master'

5 files changed, 17 insertions, 223 deletions

diff --git a/keyboards/mechmini/v1/i2c.c b/keyboards/mechmini/v1/i2c.c
deleted file mode 100644
index c27f3e3d17..0000000000
--- a/keyboards/mechmini/v1/i2c.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}
diff --git a/keyboards/mechmini/v1/i2c.h b/keyboards/mechmini/v1/i2c.h
deleted file mode 100644
index 194a82cab8..0000000000
--- a/keyboards/mechmini/v1/i2c.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif
diff --git a/keyboards/mechmini/v1/rules.mk b/keyboards/mechmini/v1/rules.mk
index 11bd8955f3..ee023b43ba 100644
--- a/keyboards/mechmini/v1/rules.mk
+++ b/keyboards/mechmini/v1/rules.mk
@@ -1,33 +1,14 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
-PROTOCOL = VUSB
-
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
 
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # build options
@@ -38,13 +19,10 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
+SRC = matrix.c
diff --git a/keyboards/mechmini/v1/usbconfig.h b/keyboards/mechmini/v1/usbconfig.h
index d2d848fcdc..85a915bb46 100644
--- a/keyboards/mechmini/v1/usbconfig.h
+++ b/keyboards/mechmini/v1/usbconfig.h
@@ -109,20 +109,10 @@ section at the end of this file).
  * (e.g. HID), but never want to send any data. This option saves a couple
  * of bytes in flash memory and the transmit buffers in RAM.
  */
-#define USB_CFG_INTR_POLL_INTERVAL      1
-/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
- * interval. The value is in milliseconds and must not be less than 10 ms for
- * low speed devices.
- */
 #define USB_CFG_IS_SELF_POWERED         0
 /* Define this to 1 if the device has its own power supply. Set it to 0 if the
  * device is powered from the USB bus.
  */
-#define USB_CFG_MAX_BUS_POWER           500
-/* Set this variable to the maximum USB bus power consumption of your device.
- * The value is in milliamperes. [It will be divided by two since USB
- * communicates power requirements in units of 2 mA.]
- */
 #define USB_CFG_IMPLEMENT_FN_WRITE      1
 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
  * transfers. Set it to 0 if you don't need it and want to save a couple of
@@ -238,7 +228,7 @@ section at the end of this file).
  * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
  * the implications!
  */
-#define USB_CFG_DEVICE_VERSION  0x00, 0x02
+#define USB_CFG_DEVICE_VERSION  (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
 /* Version number of the device: Minor number first, then major number.
  */
 #define USB_CFG_VENDOR_NAME     'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
diff --git a/keyboards/mechmini/v1/v1.c b/keyboards/mechmini/v1/v1.c
index 508d60c784..2c910d9658 100644
--- a/keyboards/mechmini/v1/v1.c
+++ b/keyboards/mechmini/v1/v1.c
@@ -16,61 +16,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "v1.h"
-#include <avr/pgmspace.h>
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
-#include "rgblight.h"
 
-// for keyboard subdirectory level init functions
-// @Override
-void matrix_init_kb(void) {
-  // call user level keymaps, if any
-  matrix_init_user();
-}
+void matrix_init_kb(void) { matrix_init_user(); }
 
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
+__attribute__ ((weak))
+void matrix_init_user(void) {}
 
-// custom RGB driver
-void rgblight_set(void) {
-  if (!rgblight_config.enable) {
-    for (uint8_t i=0; i<RGBLED_NUM; i++) {
-      led[i].r = 0;
-      led[i].g = 0;
-      led[i].b = 0;
-    }
-  }
+void matrix_scan_kb(void) { matrix_scan_user(); }
 
-  i2c_init();
-  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-  // if LEDs were previously on before poweroff, turn them back on
-  if (rgb_init == false && rgblight_config.enable) {
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-    rgb_init = true;
-  }
-
-  rgblight_task();
-#else
-void matrix_scan_kb(void) {
-#endif
-  matrix_scan_user();
-  /* Nothing else for now. */
-}
-
-__attribute__((weak)) // overridable
-void matrix_init_user(void) {
-
-}
-
-
-__attribute__((weak)) // overridable
-void matrix_scan_user(void) {
-
-}
+__attribute__ ((weak))
+void matrix_scan_user(void) {}