Remove unused RGBLight defines from config.h (#19859)

10 files changed, 0 insertions, 70 deletions

diff --git a/keyboards/mechlovin/foundation/config.h b/keyboards/mechlovin/foundation/config.h
index 0e2be4f061..2e8c992d10 100644
--- a/keyboards/mechlovin/foundation/config.h
+++ b/keyboards/mechlovin/foundation/config.h
@@ -62,12 +62,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
 // Encoder pins
diff --git a/keyboards/mechlovin/infinity87/rev2/config.h b/keyboards/mechlovin/infinity87/rev2/config.h
index acfa7f9c1f..e619e818de 100644
--- a/keyboards/mechlovin/infinity87/rev2/config.h
+++ b/keyboards/mechlovin/infinity87/rev2/config.h
@@ -58,10 +58,4 @@
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
diff --git a/keyboards/mechlovin/jay60/config.h b/keyboards/mechlovin/jay60/config.h
index 73a97ed304..e294c09bee 100644
--- a/keyboards/mechlovin/jay60/config.h
+++ b/keyboards/mechlovin/jay60/config.h
@@ -44,22 +44,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define LED_COMPOSE_PIN B3
 //#define LED_KANA_PIN B4
 
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//#    define RGBLED_NUM 16
-//#    define RGBLIGHT_HUE_STEP 8
-//#    define RGBLIGHT_SAT_STEP 8
-//#    define RGBLIGHT_VAL_STEP 8
-//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-//#endif
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/mechlovin/kay60/config.h b/keyboards/mechlovin/kay60/config.h
index d2d9b0cc85..815392505a 100644
--- a/keyboards/mechlovin/kay60/config.h
+++ b/keyboards/mechlovin/kay60/config.h
@@ -62,12 +62,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
 /*
diff --git a/keyboards/mechlovin/kay65/config.h b/keyboards/mechlovin/kay65/config.h
index b112417a6a..01c35c91ef 100644
--- a/keyboards/mechlovin/kay65/config.h
+++ b/keyboards/mechlovin/kay65/config.h
@@ -62,12 +62,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
 /*
diff --git a/keyboards/mechlovin/olly/orion/config.h b/keyboards/mechlovin/olly/orion/config.h
index 4a9c884aeb..79008bdcad 100644
--- a/keyboards/mechlovin/olly/orion/config.h
+++ b/keyboards/mechlovin/olly/orion/config.h
@@ -60,10 +60,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
diff --git a/keyboards/mechlovin/serratus/config.h b/keyboards/mechlovin/serratus/config.h
index 752f984c45..385f318b22 100644
--- a/keyboards/mechlovin/serratus/config.h
+++ b/keyboards/mechlovin/serratus/config.h
@@ -65,10 +65,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
diff --git a/keyboards/mechlovin/zed60/config.h b/keyboards/mechlovin/zed60/config.h
index d19c2de53d..83f2202b20 100644
--- a/keyboards/mechlovin/zed60/config.h
+++ b/keyboards/mechlovin/zed60/config.h
@@ -65,10 +65,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_STATIC_GRADIENT
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
diff --git a/keyboards/mechlovin/zed65/mono_led/config.h b/keyboards/mechlovin/zed65/mono_led/config.h
index 7afa6c3182..e4f0e744b3 100644
--- a/keyboards/mechlovin/zed65/mono_led/config.h
+++ b/keyboards/mechlovin/zed65/mono_led/config.h
@@ -88,10 +88,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
diff --git a/keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h b/keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h
index 84df3b11d1..c3e287c7a4 100644
--- a/keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h
+++ b/keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h
@@ -52,10 +52,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_STATIC_GRADIENT
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
\ No newline at end of file