Merge branch 'develop'

14 files changed, 82 insertions, 90 deletions

diff --git a/keyboards/mechlovin/adelais/rgb_led/rev1/info.json b/keyboards/mechlovin/adelais/rgb_led/rev1/info.json
index 816b9414c1..bdf9e7fdf5 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev1/info.json
+++ b/keyboards/mechlovin/adelais/rgb_led/rev1/info.json
@@ -4,7 +4,7 @@
         "pid": "0xAEC1"
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "ws2812"
     },
     "matrix_pins": {
         "cols": ["A10", "A9", "A8", "B15", "B14", "B13", "B12", "B11", "B10", "B8", "B4", "B5", "B3", "C14", "A15"],
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
index 1e549f9a89..d4b34ff48e 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
+++ b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
@@ -1,20 +1,5 @@
 #pragma once
 
-#define RGBLED_NUM      23
-#define RGBLIGHT_EFFECT_BREATHING
-#define RGBLIGHT_EFFECT_RAINBOW_MOOD
-#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#define RGBLIGHT_EFFECT_SNAKE
-#define RGBLIGHT_EFFECT_KNIGHT
-#define RGBLIGHT_EFFECT_CHRISTMAS
-#define RGBLIGHT_EFFECT_STATIC_GRADIENT
-#define RGBLIGHT_EFFECT_RGB_TEST
-#define RGBLIGHT_EFFECT_ALTERNATING
-#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-
 //rgb matrix setting
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
@@ -86,5 +71,3 @@
 #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
 #define RGB_MATRIX_DISABLE_KEYCODES
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/info.json b/keyboards/mechlovin/adelais/rgb_led/rev2/info.json
index 4ac693f894..60fff3c7a7 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev2/info.json
+++ b/keyboards/mechlovin/adelais/rgb_led/rev2/info.json
@@ -4,7 +4,7 @@
         "pid": "0xAEC2"
     },
     "rgb_matrix": {
-        "driver": "IS31FL3731"
+        "driver": "is31fl3731"
     },
     "matrix_pins": {
         "cols": ["A10", "A9", "A8", "B15", "B14", "B13", "B12", "B11", "B10", "B8", "B4", "B5", "B3", "C14", "A7"],
@@ -16,6 +16,26 @@
             {"pin_a": "A4", "pin_b": "A3"}
         ]
     },
+    "qmk": {
+        "tap_keycode_delay": 10
+    },
+    "rgblight": {
+        "saturation_steps": 8,
+        "brightness_steps": 8,
+        "led_count": 23,
+        "animations": {
+            "breathing": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true,
+            "snake": true,
+            "knight": true,
+            "christmas": true,
+            "static_gradient": true,
+            "rgb_test": true,
+            "alternating": true,
+            "twinkle": true
+        }
+    },
     "ws2812": {
         "pin": "A15"
     },
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
index c4f801b40d..c4961c6492 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
+++ b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
@@ -17,24 +17,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#ifdef  RGBLIGHT_ENABLE
 #define WS2812_SPI SPID1 // default: SPID1
 #define WS2812_SPI_MOSI_PAL_MODE 5 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
-#define RGBLED_NUM      23
-#define RGBLIGHT_EFFECT_BREATHING
-#define RGBLIGHT_EFFECT_RAINBOW_MOOD
-#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#define RGBLIGHT_EFFECT_SNAKE
-#define RGBLIGHT_EFFECT_KNIGHT
-#define RGBLIGHT_EFFECT_CHRISTMAS
-#define RGBLIGHT_EFFECT_STATIC_GRADIENT
-#define RGBLIGHT_EFFECT_RGB_TEST
-#define RGBLIGHT_EFFECT_ALTERNATING
-#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#endif 
 
 #ifdef RGB_MATRIX_ENABLE
 //rgb matrix setting
@@ -108,5 +92,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
 
 #endif
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/info.json b/keyboards/mechlovin/adelais/rgb_led/rev3/info.json
index d1775ccb83..6064967f7f 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev3/info.json
+++ b/keyboards/mechlovin/adelais/rgb_led/rev3/info.json
@@ -4,7 +4,7 @@
         "pid": "0xAEC3"
     },
     "rgb_matrix": {
-        "driver": "IS31FL3741"
+        "driver": "is31fl3741"
     },
     "matrix_pins": {
         "cols": ["B10", "B11", "B2", "B1", "B0", "A6", "A5", "A10", "A9", "A15", "B3", "B4", "B5", "B8", "B9"],
@@ -16,6 +16,9 @@
             {"pin_a": "B12", "pin_b": "B13"}
         ]
     },
+    "qmk": {
+        "tap_keycode_delay": 10
+    },
     "processor": "STM32F103",
     "bootloader": "stm32duino",
     "indicators": {
@@ -23,6 +26,23 @@
         "num_lock": "A0",
         "scroll_lock": "C15"
     },
+    "rgblight": {
+        "saturation_steps": 8,
+        "brightness_steps": 8,
+        "led_count": 23,
+        "animations": {
+            "breathing": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true,
+            "snake": true,
+            "knight": true,
+            "christmas": true,
+            "static_gradient": true,
+            "rgb_test": true,
+            "alternating": true,
+            "twinkle": true
+        }
+    },
     "ws2812": {
         "pin": "A7",
         "driver": "spi"
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk b/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk
index 5664ce6844..e144301381 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk
+++ b/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk
@@ -6,6 +6,3 @@ RGBLIGHT_ENABLE = yes
 ENCODER_ENABLE = yes
 CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
-
-# Enter lower-power sleep mode when on the ChibiOS idle thread
-OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
\ No newline at end of file
diff --git a/keyboards/mechlovin/adelais/standard_led/arm/config.h b/keyboards/mechlovin/adelais/standard_led/arm/config.h
index 1c9b61b9df..d8e1a8fd39 100644
--- a/keyboards/mechlovin/adelais/standard_led/arm/config.h
+++ b/keyboards/mechlovin/adelais/standard_led/arm/config.h
@@ -18,16 +18,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define BACKLIGHT_PWM_DRIVER PWMD3
-#define BACKLIGHT_PWM_CHANNEL 3
-
-#define RGBLED_NUM 23
-#define RGBLIGHT_EFFECT_BREATHING
-#define RGBLIGHT_EFFECT_RAINBOW_MOOD
-#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#define RGBLIGHT_EFFECT_SNAKE
-#define RGBLIGHT_EFFECT_KNIGHT
-#define RGBLIGHT_EFFECT_CHRISTMAS
-#define RGBLIGHT_EFFECT_STATIC_GRADIENT
-#define RGBLIGHT_EFFECT_RGB_TEST
-#define RGBLIGHT_EFFECT_ALTERNATING
-#define RGBLIGHT_EFFECT_TWINKLE
diff --git a/keyboards/mechlovin/adelais/standard_led/arm/info.json b/keyboards/mechlovin/adelais/standard_led/arm/info.json
index 9c6bd46a70..578584cc54 100644
--- a/keyboards/mechlovin/adelais/standard_led/arm/info.json
+++ b/keyboards/mechlovin/adelais/standard_led/arm/info.json
@@ -9,6 +9,21 @@
         "pin": "B0",
         "breathing": true
     },
+    "rgblight": {
+        "led_count": 23,
+        "animations": {
+            "breathing": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true,
+            "snake": true,
+            "knight": true,
+            "christmas": true,
+            "static_gradient": true,
+            "rgb_test": true,
+            "alternating": true,
+            "twinkle": true
+        }
+    },
     "ws2812": {
         "pin": "A7"
     },
diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev3/config.h b/keyboards/mechlovin/adelais/standard_led/arm/rev3/config.h
deleted file mode 100644
index 254d204038..0000000000
--- a/keyboards/mechlovin/adelais/standard_led/arm/rev3/config.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#pragma once
-
-#define TAP_CODE_DELAY 10
\ No newline at end of file
diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json b/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json
index a5ebef5b87..46907dc7a9 100644
--- a/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json
+++ b/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json
@@ -9,6 +9,9 @@
             {"pin_a": "B7", "pin_b": "B6"}
         ]
     },
+    "qmk": {
+        "tap_keycode_delay": 10
+    },
     "processor": "STM32F303",
     "board": "QMK_PROTON_C",
     "bootloader": "stm32-dfu",
diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev4/config.h b/keyboards/mechlovin/adelais/standard_led/arm/rev4/config.h
deleted file mode 100644
index 7905be1891..0000000000
--- a/keyboards/mechlovin/adelais/standard_led/arm/rev4/config.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
-Copyright 2021 Mechlovin' Studio
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#pragma once
-
-#define TAP_CODE_DELAY 10
\ No newline at end of file
diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json b/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json
index b6ee0c5b67..f0d10942ad 100644
--- a/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json
+++ b/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json
@@ -9,6 +9,9 @@
             {"pin_a": "B7", "pin_b": "B6"}
         ]
     },
+    "qmk": {
+        "tap_keycode_delay": 10
+    },
     "layout_aliases": {
         "LAYOUT_all": "LAYOUT_alice_split_bs"
     },
diff --git a/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h b/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h
index 0e23efaf3a..dd04e29a7a 100644
--- a/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h
+++ b/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h
@@ -30,17 +30,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION ROW2COL
-
-#define RGBLED_NUM 23
-#define RGBLIGHT_EFFECT_BREATHING
-#define RGBLIGHT_EFFECT_RAINBOW_MOOD
-#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#define RGBLIGHT_EFFECT_SNAKE
-#define RGBLIGHT_EFFECT_KNIGHT
-#define RGBLIGHT_EFFECT_CHRISTMAS
-#define RGBLIGHT_EFFECT_STATIC_GRADIENT
-#define RGBLIGHT_EFFECT_RGB_TEST
-#define RGBLIGHT_EFFECT_ALTERNATING
-#define RGBLIGHT_EFFECT_TWINKLE
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json b/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json
index 31de7de957..95aac7b0d4 100644
--- a/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json
+++ b/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json
@@ -10,10 +10,28 @@
             {"pin_a": "C7", "pin_b": "C6"}
         ]
     },
+    "qmk": {
+        "tap_keycode_delay": 10
+    },
     "backlight": {
         "pin": "B5",
         "breathing": true
     },
+    "rgblight": {
+        "led_count": 23,
+        "animations": {
+            "breathing": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true,
+            "snake": true,
+            "knight": true,
+            "christmas": true,
+            "static_gradient": true,
+            "rgb_test": true,
+            "alternating": true,
+            "twinkle": true
+        }
+    },
     "ws2812": {
         "pin": "E2"
     },