Add smk65/revf support (#10434)

* Move existing files out the way

* Convert to community layouts

* Add smk65/revf support

* Disable stuff by default

* Update IDs for via

* Align LAYOUT macros for community layouts

* Align LAYOUT macros for community layouts - Fix configurator ordering

* Update via keymap

* remove stub _kb function

* Apply suggestions from code review

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>

1 files changed, 171 insertions, 0 deletions

diff --git a/keyboards/lfkeyboards/smk65/revb/revb.c b/keyboards/lfkeyboards/smk65/revb/revb.c
new file mode 100644
index 0000000000..7498febeb3
--- /dev/null
+++ b/keyboards/lfkeyboards/smk65/revb/revb.c
@@ -0,0 +1,171 @@
+/*
+Copyright 2020 LFKeyboards
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/sfr_defs.h>
+#include <avr/timer_avr.h>
+#include <avr/wdt.h>
+#include "smk65.h"
+#include "keymap.h"
+#include "debug.h"
+#include "issi.h"
+#include "TWIlib.h"
+#include "lighting.h"
+
+uint16_t click_hz = CLICK_HZ;
+uint16_t click_time = CLICK_MS;
+uint8_t click_toggle = CLICK_ENABLED;
+
+
+void matrix_init_kb(void)
+{
+    matrix_init_user();
+
+#ifdef AUDIO_ENABLE
+    // audio_init() sets PB5 to output and drives it low, which breaks our matrix
+    // so reset PB5 to input
+    cbi(DDRB, 5);
+    sbi(PORTB, 5);
+#else
+    // If we're not using the audio pin, drive it low
+    sbi(DDRC, 6);
+    cbi(PORTC, 6);
+#endif
+
+#ifdef ISSI_ENABLE
+    issi_init();
+#endif
+}
+
+void matrix_scan_kb(void)
+{
+#ifdef WATCHDOG_ENABLE
+    wdt_reset();
+#endif
+    matrix_scan_user();
+}
+
+void click(uint16_t freq, uint16_t duration){
+#ifdef AUDIO_ENABLE
+    if(freq >= 100 && freq <= 20000 && duration < 100){
+        play_note(freq, 10);
+        for (uint16_t i = 0; i < duration; i++){
+            _delay_ms(1);
+        }
+        stop_all_notes();
+    }
+#endif
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t* record)
+{
+    // Test code that turns on the switch led for the key that is pressed
+    // set_backlight_by_keymap(record->event.key.col, record->event.key.row);
+    if (click_toggle && record->event.pressed){
+        click(click_hz, click_time);
+    }
+    if (keycode == RESET) {
+        reset_keyboard_kb();
+    } else {
+    }
+    return process_record_user(keycode, record);
+}
+
+void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
+{
+#ifdef AUDIO_ENABLE
+    int8_t sign = 1;
+#endif
+    if(id == LFK_ESC_TILDE){
+        // Send ~ on shift-esc
+        void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key;
+        uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT));
+        method(shifted ? KC_GRAVE : KC_ESCAPE);
+        send_keyboard_report();
+    }else if(event->event.pressed){
+        switch(id){
+            case LFK_SET_DEFAULT_LAYER:
+                // set/save the current base layer to eeprom, falls through to LFK_CLEAR
+                eeconfig_update_default_layer(1UL << opt);
+                default_layer_set(1UL << opt);
+            case LFK_CLEAR:
+                // Go back to default layer
+                layer_clear();
+                break;
+#ifdef AUDIO_ENABLE
+            case LFK_CLICK_FREQ_LOWER:
+                sign = -1;  // continue to next statement
+            case LFK_CLICK_FREQ_HIGHER:
+                click_hz += sign * 100;
+                click(click_hz, click_time);
+                break;
+            case LFK_CLICK_TOGGLE:
+                if(click_toggle){
+                    click_toggle = 0;
+                    click(4000, 100);
+                    click(1000, 100);
+                }else{
+                    click_toggle = 1;
+                    click(1000, 100);
+                    click(4000, 100);
+                }
+                break;
+            case LFK_CLICK_TIME_SHORTER:
+                sign = -1;  // continue to next statement
+            case LFK_CLICK_TIME_LONGER:
+                click_time += sign;
+                click(click_hz, click_time);
+                break;
+#endif
+            case LFK_DEBUG_SETTINGS:
+                dprintf("Click:\n");
+                dprintf("  toggle: %d\n", click_toggle);
+                dprintf("  freq(hz): %d\n", click_hz);
+                dprintf("  duration(ms): %d\n", click_time);
+                break;
+        }
+    }
+}
+
+void reset_keyboard_kb(){
+#ifdef WATCHDOG_ENABLE
+    MCUSR = 0;
+    wdt_disable();
+    wdt_reset();
+#endif
+    reset_keyboard();
+}
+
+// LFK lighting info
+const uint8_t switch_matrices[] = {0, 1};
+const uint8_t rgb_matrices[] = {6, 7};
+// const uint8_t rgb_sequence[] = {
+//     14, 24, 23, 22, 21, 20, 19, 18, 26, 25, 28, 29,
+//     30, 31, 32, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
+// };
+const uint8_t rgb_sequence[] = {
+    25, 28, 29,
+    30, 31, 32, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
+};
+// Maps switch LEDs from Row/Col to ISSI matrix.
+// Value breakdown:
+//     Bit     | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+//            /    \ ISSI Col  |    ISSI Row   |
+//          matrix idx
+// const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] =
+// KEYMAP(
+//   0x19, 0x18,   0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94,   0x93,   0x92, 0x91,
+//   0x29, 0x28,    0x27,  0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, 0xA4, 0xA3,   0xA2, 0xA1,
+//   0x39, 0x38,      0x37,  0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5,     0xB3,
+//   0x49, 0x48,    0x47,     0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, 0xC5,          0xC4,   0xC2,
+//   0x59, 0x58,   0x57,  0x56,  0x55,             0x51,                   0xD6, 0xE5, 0xE4,         0xE3, 0xE2, 0xE1);