Merge remote-tracking branch 'upstream/master'

11 files changed, 174 insertions, 95 deletions

diff --git a/keyboards/lets_split_eh/config.h b/keyboards/lets_split_eh/config.h
index 655d35e1ab..f07706a834 100644
--- a/keyboards/lets_split_eh/config.h
+++ b/keyboards/lets_split_eh/config.h
@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -35,8 +34,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE 5
-
-/* serial.c configuration for split keyboard */
-//#define SOFT_SERIAL_PIN D0
-
-#endif
diff --git a/keyboards/lets_split_eh/eh/config.h b/keyboards/lets_split_eh/eh/config.h
index 59afb39c0f..43e0266502 100644
--- a/keyboards/lets_split_eh/eh/config.h
+++ b/keyboards/lets_split_eh/eh/config.h
@@ -16,13 +16,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef EH_CONFIG_H
-#define EH_CONFIG_H
-
-// To let configuration know this is of type EH, which will force I2C irregardless of user config
-#define EH
-// The 'EH' only uses I2C
-#define USE_I2C
+#pragma once
 
 #include "config_common.h"
 
@@ -40,10 +34,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN B2
-#define RGBLED_NUM 6    // Number of LEDs (each hand)
+#define RGBLED_NUM 12    // Number of LEDs (each hand)
+#define RGBLED_SPLIT { 6, 6 }
+#define RGBLIGHT_ANIMATIONS 
 
 /* Split Defines */
 #define SPLIT_HAND_PIN D3
+#define SOFT_SERIAL_PIN D0
 
-#endif
-
+// The 'EH' has previously forced use of I2C so this default has been kept
+// however users can undef to use serial
+#define USE_I2C
diff --git a/keyboards/lets_split_eh/eh/eh.c b/keyboards/lets_split_eh/eh/eh.c
index e748d3ae05..d5a312085d 100644
--- a/keyboards/lets_split_eh/eh/eh.c
+++ b/keyboards/lets_split_eh/eh/eh.c
@@ -1,14 +1 @@
 #include "lets_split_eh.h"
-
-void matrix_init_kb(void) {
-
-    // JTAG disable for PORT F. write JTD bit twice within four cycles.
-    MCUCR |= (1<<JTD);
-    MCUCR |= (1<<JTD);
-	
-	// Undo init of RX LED, we use that port currently
-	// DDRB &= ~(1<<0);
-	
-	matrix_init_user();
-};
-
diff --git a/keyboards/lets_split_eh/eh/eh.h b/keyboards/lets_split_eh/eh/eh.h
index 7dc84fe181..ff37229787 100644
--- a/keyboards/lets_split_eh/eh/eh.h
+++ b/keyboards/lets_split_eh/eh/eh.h
@@ -1,5 +1,4 @@
-#ifndef EH_H
-#define EH_H
+#pragma once
 
 #include "lets_split_eh.h"
 
@@ -23,5 +22,3 @@
 	}
     
 #define LAYOUT_ortho_4x12 LAYOUT
-
-#endif
diff --git a/keyboards/lets_split_eh/eh/rules.mk b/keyboards/lets_split_eh/eh/rules.mk
index 4bac58533e..31077066a3 100644
--- a/keyboards/lets_split_eh/eh/rules.mk
+++ b/keyboards/lets_split_eh/eh/rules.mk
@@ -1,4 +1,2 @@
-BOOTLOADER = atmel-dfu
-
 BACKLIGHT_ENABLE = yes
-RGBLIGHT_ENABLE = yes
\ No newline at end of file
+RGBLIGHT_ENABLE = yes
diff --git a/keyboards/lets_split_eh/keymaps/default/keymap.c b/keyboards/lets_split_eh/keymaps/default/keymap.c
index 1983459f68..fe5ca0c8c8 100644
--- a/keyboards/lets_split_eh/keymaps/default/keymap.c
+++ b/keyboards/lets_split_eh/keymaps/default/keymap.c
@@ -4,11 +4,13 @@
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
 // entirely and just use numbers.
-#define _QWERTY 0
-#define _LOWER 3
-#define _RAISE 4
-#define _FUNCTION 15
-#define _ADJUST 16
+enum layers {
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _FUNCTION,
+  _ADJUST,
+};
 
 #define LOWER     MO(_LOWER)
 #define RAISE     MO(_RAISE)
@@ -77,9 +79,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Adjust (Lower + Raise)
  * ,-----------------------------------------------------------------------------------.
- * |Taskmg|      |      |      |      |      |      |      |RGBVAI|RGBSAI|RGBHUI|caltde|
+ * |Taskmg|      |      |      |      |      |      |RGBMOD|RGBVAI|RGBSAI|RGBHUI|caltde|
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |RGBVAD|RGBSAD|RGBHUD|RGBTOG|
+ * |      |      |      |      |      |      |      |RGBRMO|RGBVAD|RGBSAD|RGBHUD|RGBTOG|
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * |      |      |      |      |      |      |      |      |      |      |      |BLSTEP|
  * |------+------+------+------+------+------+------+------+------+------+------+------|
@@ -87,8 +89,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_ADJUST] = LAYOUT( \
-  TSKMGR,  _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAI, RGB_HUI, CALTDEL, \
-  _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_SAD, RGB_HUD, RGB_TOG, \
+  TSKMGR,  _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_VAI, RGB_SAI, RGB_HUI, CALTDEL, \
+  _______, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_VAD, RGB_SAD, RGB_HUD, RGB_TOG, \
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, \
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET    \
 ),
@@ -116,7 +118,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 uint32_t layer_state_set_user(uint32_t state) {
   return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
 }
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
diff --git a/keyboards/lets_split_eh/keymaps/mikethetiger/config.h b/keyboards/lets_split_eh/keymaps/mikethetiger/config.h
new file mode 100644
index 0000000000..c535299e74
--- /dev/null
+++ b/keyboards/lets_split_eh/keymaps/mikethetiger/config.h
@@ -0,0 +1,23 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+ // place overrides here
diff --git a/keyboards/lets_split_eh/keymaps/mikethetiger/keymap.c b/keyboards/lets_split_eh/keymaps/mikethetiger/keymap.c
new file mode 100644
index 0000000000..c5a2ed9535
--- /dev/null
+++ b/keyboards/lets_split_eh/keymaps/mikethetiger/keymap.c
@@ -0,0 +1,120 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layers {
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _FUNCTION,
+  _ADJUST,
+};
+
+#define LOWER     MO(_LOWER)
+#define RAISE     MO(_RAISE)
+#define FUNCTION  MO(_FUNCTION)
+#define ADJUST    MO(_ADJUST)
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT( \
+  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+  KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+  _______, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT 
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      |      | Home | End  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, KC_HOME, KC_END,  _______,
+  _______, _______, _______, _______, _______, _______, _______, _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      |      |Pg Up |Pg Dn |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, KC_PGUP, KC_PGDN, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * | RESET|      |      |      |      |      |      |RGBMOD|RGBVAI|RGBSAI|RGBHUI|caltde|
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |RGBRMO|RGBVAD|RGBSAD|RGBHUD|RGBTOG|
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |BLSTEP|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT( \
+  RESET,  _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_VAI, RGB_SAI, RGB_HUI, CALTDEL, \
+  _______, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_VAD, RGB_SAD, RGB_HUD, RGB_TOG, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______    \
+),
+
+/* Function
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |  Up  |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      | Left | Down |Right |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Caps |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_FUNCTION] = LAYOUT( \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, \
+  KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  \
+)
+
+};
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
diff --git a/keyboards/lets_split_eh/keymaps/default/rules.mk b/keyboards/lets_split_eh/keymaps/mikethetiger/rules.mk
index e69de29bb2..e69de29bb2 100644
--- a/keyboards/lets_split_eh/keymaps/default/rules.mk
+++ b/keyboards/lets_split_eh/keymaps/mikethetiger/rules.mk
diff --git a/keyboards/lets_split_eh/lets_split_eh.h b/keyboards/lets_split_eh/lets_split_eh.h
index f3d2cd0d06..51828b09ba 100644
--- a/keyboards/lets_split_eh/lets_split_eh.h
+++ b/keyboards/lets_split_eh/lets_split_eh.h
@@ -1,5 +1,4 @@
-#ifndef LETS_SPLIT_EH_H
-#define LETS_SPLIT_EH_H
+#pragma once
 
 #include "quantum.h"
 
@@ -23,5 +22,3 @@
     )
 
 #define LAYOUT_kc_ortho_4x12 LAYOUT_kc
-
-#endif
diff --git a/keyboards/lets_split_eh/rules.mk b/keyboards/lets_split_eh/rules.mk
index 99b1ba2344..2bcd087d82 100644
--- a/keyboards/lets_split_eh/rules.mk
+++ b/keyboards/lets_split_eh/rules.mk
@@ -1,49 +1,16 @@
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically