Require explicit enabling of RGB Matrix modes (#15018)

1 files changed, 61 insertions, 28 deletions

diff --git a/keyboards/latin17rgb/config.h b/keyboards/latin17rgb/config.h
index 1f52f9a651..6b929f249d 100644
--- a/keyboards/latin17rgb/config.h
+++ b/keyboards/latin17rgb/config.h
@@ -57,36 +57,69 @@
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #    define RGB_MATRIX_KEYPRESSES
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-#    define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-#    define DISABLE_RGB_MATRIX_BAND_SAT
-#    define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
-#    define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
-#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
-#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
-#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
-#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
-#    define DISABLE_RGB_MATRIX_SPLASH
-#    define DISABLE_RGB_MATRIX_MULTISPLASH
-#    define DISABLE_RGB_MATRIX_SOLID_SPLASH
-#    define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
-#    define DISABLE_RGB_MATRIX_DIGITAL_RAIN
+ // RGB Matrix Animation modes. Explicitly enabled
+ // For full list of effects, see:
+ // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
+#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
+// #    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_BREATHING
+// #    define ENABLE_RGB_MATRIX_BAND_SAT
+#    define ENABLE_RGB_MATRIX_BAND_VAL
+// #    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+// #    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#    define ENABLE_RGB_MATRIX_CYCLE_ALL
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#    define ENABLE_RGB_MATRIX_DUAL_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#    define ENABLE_RGB_MATRIX_RAINDROPS
+#    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#    define ENABLE_RGB_MATRIX_HUE_BREATHING
+#    define ENABLE_RGB_MATRIX_HUE_PENDULUM
+#    define ENABLE_RGB_MATRIX_HUE_WAVE
+#    define ENABLE_RGB_MATRIX_PIXEL_RAIN
+#    define ENABLE_RGB_MATRIX_PIXEL_FLOW
+#    define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+ // enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
+#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+// #    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+ // enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+// #    define ENABLE_RGB_MATRIX_SPLASH
+// #    define ENABLE_RGB_MATRIX_MULTISPLASH
+// #    define ENABLE_RGB_MATRIX_SOLID_SPLASH
+// #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 0b1110100 AD <-> GND
-// 0b1110111 AD <-> VCC
-// 0b1110101 AD <-> SCL
-// 0b1110110 AD <-> SDA
-#define DRIVER_ADDR_1 0b1110100
-#define DRIVER_ADDR_2 0b1110110
+ // This is a 7-bit address, that gets left-shifted and bit 0
+ // set to 0 for write, 1 for read (as per I2C protocol)
+ // The address will vary depending on your wiring:
+ // 0b1110100 AD <-> GND
+ // 0b1110111 AD <-> VCC
+ // 0b1110101 AD <-> SCL
+ // 0b1110110 AD <-> SDA
+#    define DRIVER_ADDR_1 0b1110100
+#    define DRIVER_ADDR_2 0b1110110
 
-#define DRIVER_COUNT 2
-#define DRIVER_1_LED_TOTAL 25
-#define DRIVER_2_LED_TOTAL 24
-#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+#    define DRIVER_COUNT 2
+#    define DRIVER_1_LED_TOTAL 25
+#    define DRIVER_2_LED_TOTAL 24
+#    define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 
 #endif
 #define RGB_DI_PIN B7