Migrate RGB Matrix config to info.json - K (#22911)

2 files changed, 48 insertions, 69 deletions

diff --git a/keyboards/kprepublic/bm60hsrgb_poker/rev2/config.h b/keyboards/kprepublic/bm60hsrgb_poker/rev2/config.h
index fdeb9b61e9..c2184ee0f8 100644
--- a/keyboards/kprepublic/bm60hsrgb_poker/rev2/config.h
+++ b/keyboards/kprepublic/bm60hsrgb_poker/rev2/config.h
@@ -17,70 +17,8 @@
 
 #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_MOOD
 
-#    define RGB_MATRIX_SLEEP // turn off effects when suspended
-#    define RGB_MATRIX_KEYPRESSES
-#define ENABLE_RGB_MATRIX_ALPHAS_MODS
-#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
-#define ENABLE_RGB_MATRIX_BREATHING
-#define ENABLE_RGB_MATRIX_BAND_SAT
-#define ENABLE_RGB_MATRIX_BAND_VAL
-#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
-#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
-#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
-#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
-#define ENABLE_RGB_MATRIX_CYCLE_ALL
-#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
-#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
-#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
-#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
-#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
-#define ENABLE_RGB_MATRIX_DUAL_BEACON
-#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
-#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
-#define ENABLE_RGB_MATRIX_RAINDROPS
-#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
-#define ENABLE_RGB_MATRIX_HUE_BREATHING
-#define ENABLE_RGB_MATRIX_HUE_PENDULUM
-#define ENABLE_RGB_MATRIX_HUE_WAVE
-#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
-#define ENABLE_RGB_MATRIX_PIXEL_RAIN
-
-#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
-#define ENABLE_RGB_MATRIX_DIGITAL_RAIN
-
-#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
-#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
-#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
-#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
-#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
-#define ENABLE_RGB_MATRIX_SPLASH
-#define ENABLE_RGB_MATRIX_MULTISPLASH
-#define ENABLE_RGB_MATRIX_SOLID_SPLASH
-#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
-
-#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180
-
-
-
-
-
-// Note: The RGB LED driver configuration is not inside #ifdef blocks, so that
-// the driver code would still compile even without RGBLIGHT_ENABLE and
-// RGB_MATRIX_ENABLE (usually this is not required, but with the custom
-// IS31FL3733+WS2812 driver setup used by this board the LED controller drivers
-// are compiled unconditionally).
-
-// Configure the IS31FL3733 driver for per-key RGB LEDs
 #define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND
-#define DRIVER_1_LED_TOTAL 61
-
-#define IS31FL3733_LED_COUNT DRIVER_1_LED_TOTAL
+#define IS31FL3733_LED_COUNT 61
 
 // Underglow LEDs are WS2812, but someone might want to use RGBLIGHT for them;
 // don't use those LEDs in RGB Matrix in that case.
@@ -91,8 +29,3 @@
 #endif
 
 #define RGB_MATRIX_LED_COUNT (IS31FL3733_LED_COUNT + WS2812_LED_TOTAL)
-
-#ifdef RGB_MATRIX_ENABLE
-#    define RGB_MATRIX_KEYPRESSES
-#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-#endif
diff --git a/keyboards/kprepublic/bm60hsrgb_poker/rev2/info.json b/keyboards/kprepublic/bm60hsrgb_poker/rev2/info.json
index 82d1974f06..69cb814cae 100644
--- a/keyboards/kprepublic/bm60hsrgb_poker/rev2/info.json
+++ b/keyboards/kprepublic/bm60hsrgb_poker/rev2/info.json
@@ -12,7 +12,53 @@
         "pin": "F0"
     },
     "rgb_matrix": {
-        "driver": "custom"
+        "animations": {
+            "alphas_mods": true,
+            "gradient_up_down": true,
+            "gradient_left_right": true,
+            "breathing": true,
+            "band_sat": true,
+            "band_val": true,
+            "band_pinwheel_sat": true,
+            "band_pinwheel_val": true,
+            "band_spiral_sat": true,
+            "band_spiral_val": true,
+            "cycle_all": true,
+            "cycle_left_right": true,
+            "cycle_up_down": true,
+            "rainbow_moving_chevron": true,
+            "cycle_out_in": true,
+            "cycle_out_in_dual": true,
+            "cycle_pinwheel": true,
+            "cycle_spiral": true,
+            "dual_beacon": true,
+            "rainbow_beacon": true,
+            "rainbow_pinwheels": true,
+            "raindrops": true,
+            "jellybean_raindrops": true,
+            "hue_breathing": true,
+            "hue_pendulum": true,
+            "hue_wave": true,
+            "pixel_fractal": true,
+            "pixel_rain": true,
+            "typing_heatmap": true,
+            "digital_rain": true,
+            "solid_reactive_simple": true,
+            "solid_reactive": true,
+            "solid_reactive_wide": true,
+            "solid_reactive_multiwide": true,
+            "solid_reactive_cross": true,
+            "solid_reactive_multicross": true,
+            "solid_reactive_nexus": true,
+            "solid_reactive_multinexus": true,
+            "splash": true,
+            "multisplash": true,
+            "solid_splash": true,
+            "solid_multisplash": true
+        },
+        "driver": "custom",
+        "max_brightness": 120,
+        "sleep": true
     },
     "rgblight": {
         "saturation_steps": 8,