add kibou/wendy (#21150)

1 files changed, 23 insertions, 0 deletions

diff --git a/keyboards/kibou/wendy/readme.md b/keyboards/kibou/wendy/readme.md
new file mode 100644
index 0000000000..a190d03047
--- /dev/null
+++ b/keyboards/kibou/wendy/readme.md
@@ -0,0 +1,23 @@
+# wendy
+
+* Keyboard Maintainer: [wendy](https://kibou.store/)
+* Hardware Supported: wendy PCBs, STM32F072
+* Hardware Availability: https://kibou.store/
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kibou/wendy:default
+
+Flashing example for this keyboard:
+
+    make kibou/wendy:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available