[Keyboard] Create KBDFans directory (#5025)

* move over kbd19x into the kbdfans directory

* move over kbd4x into the kbdfans directory

* move kbd66 into the kbdfans directory

* move the kbd6x into the kbdfans directory

* move kbd8x into the kbdfans directory

* move kbd75 into the kbdfans directory

* move kbd67 into kbdfans directory

* add a fairly sparse readme for kbdfans directory

* update make instructions for keyboards and add the Complete Newbs Guide to readmes that was missing it

* get kbd75 compiling again

* remove repetitive #defines of KC_NO and KC_TRNS when QMK_KEYBOARD_H is already included in KBD75

* add links to kbdfans readme

* fix some readme formatting

* there is no reason to have two different keymaps with such a small difference, condensing to one

* turning on backlights by default

* enable backlight by default for kbd66

* noticed that the kbd75 had caps lock led code in every keymap. Moved it out to the keyboard.c so everyone can partake.

* Update keyboards/kbdfans/kbd66/readme.md

Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>

* update readme link ordering

1 files changed, 0 insertions, 56 deletions

diff --git a/keyboards/kbd75/rev1/rules.mk b/keyboards/kbd75/rev1/rules.mk
deleted file mode 100644
index 9c4082da29..0000000000
--- a/keyboards/kbd75/rev1/rules.mk
+++ /dev/null
@@ -1,56 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
-AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = yes
\ No newline at end of file