move input club keyboards into vendor folder (#15788)

1 files changed, 150 insertions, 0 deletions

diff --git a/keyboards/input_club/k_type/i2c_master.c b/keyboards/input_club/k_type/i2c_master.c
new file mode 100644
index 0000000000..af34d55ef6
--- /dev/null
+++ b/keyboards/input_club/k_type/i2c_master.c
@@ -0,0 +1,150 @@
+/* Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* This library is only valid for STM32 processors.
+ * This library follows the convention of the AVR i2c_master library.
+ * As a result addresses are expected to be already shifted (addr << 1).
+ * I2CD1 is the default driver which corresponds to pins B6 and B7. This
+ * can be changed.
+ * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
+ * but using any other I2C pins should be trivial.
+ */
+
+#ifdef RGB_MATRIX_ENABLE
+
+
+#include "quantum.h"
+#include "i2c_master.h"
+#include <string.h>
+#include <hal.h>
+
+static uint8_t i2c_address;
+
+I2CDriver *drivers[I2C_COUNT];
+
+static const I2CConfig i2cconfig = {
+#if defined(USE_I2CV1_CONTRIB)
+    I2C1_CLOCK_SPEED,
+#elif defined(USE_I2CV1)
+    I2C1_OPMODE,
+    I2C1_CLOCK_SPEED,
+    I2C1_DUTY_CYCLE,
+#else
+    // This configures the I2C clock to 400khz assuming a 72Mhz clock
+    // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+    STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0
+#endif
+};
+
+static i2c_status_t chibios_to_qmk(const msg_t* status) {
+    switch (*status) {
+        case I2C_NO_ERROR:
+            return I2C_STATUS_SUCCESS;
+        case I2C_TIMEOUT:
+            return I2C_STATUS_TIMEOUT;
+        // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
+        default:
+            return I2C_STATUS_ERROR;
+    }
+}
+
+__attribute__((weak)) void i2c_init(I2CDriver *driver, ioline_t scl_pin, ioline_t sda_pin) {
+    static uint8_t index = 0;
+    if (index < I2C_COUNT) {
+
+        // Try releasing special pins for a short time
+        palSetLineMode(scl_pin, PAL_MODE_INPUT);
+        palSetLineMode(sda_pin, PAL_MODE_INPUT);
+
+        chThdSleepMilliseconds(10);
+
+#if defined(USE_GPIOV1)
+        palSetLineMode(scl_pin, I2C1_SCL_PAL_MODE);
+        palSetLineMode(sda_pin, I2C1_SDA_PAL_MODE);
+#else
+        palSetLineMode(scl_pin, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN);
+        palSetLineMode(sda_pin, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN);
+#endif
+
+        drivers[index++] = driver;
+    }
+}
+
+i2c_status_t i2c_start(uint8_t index, uint8_t address) {
+    if(index >= I2C_COUNT) {
+        return I2C_STATUS_ERROR;
+    }
+    i2c_address = address;
+    i2cStart(drivers[index], &i2cconfig);
+    return I2C_STATUS_SUCCESS;
+}
+
+i2c_status_t i2c_transmit(uint8_t index, uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
+    if(index >= I2C_COUNT) {
+        return I2C_STATUS_ERROR;
+    }
+    i2c_address = address;
+    i2cStart(drivers[index], &i2cconfig);
+    msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), data, length, 0, 0, TIME_MS2I(timeout));
+    return chibios_to_qmk(&status);
+}
+
+i2c_status_t i2c_receive(uint8_t index, uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
+    if(index >= I2C_COUNT) {
+        return I2C_STATUS_ERROR;
+    }
+    i2c_address = address;
+    i2cStart(drivers[index], &i2cconfig);
+    msg_t status = i2cMasterReceiveTimeout(drivers[index], (i2c_address >> 1), data, length, TIME_MS2I(timeout));
+    return chibios_to_qmk(&status);
+}
+
+i2c_status_t i2c_writeReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) {
+    if(index >= I2C_COUNT) {
+        return I2C_STATUS_ERROR;
+    }
+    i2c_address = devaddr;
+    i2cStart(drivers[index], &i2cconfig);
+
+    uint8_t complete_packet[length + 1];
+    for (uint8_t i = 0; i < length; i++) {
+        complete_packet[i + 1] = data[i];
+    }
+    complete_packet[0] = regaddr;
+
+    msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), complete_packet, length + 1, 0, 0, TIME_MS2I(timeout));
+    return chibios_to_qmk(&status);
+}
+
+i2c_status_t i2c_readReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
+    if(index >= I2C_COUNT) {
+        return I2C_STATUS_ERROR;
+    }
+    i2c_address = devaddr;
+    i2cStart(drivers[index], &i2cconfig);
+    msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), &regaddr, 1, data, length, TIME_MS2I(timeout));
+    return chibios_to_qmk(&status);
+}
+
+void i2c_stop(uint8_t index) {
+    if(index < I2C_COUNT) {
+        i2cStop(drivers[index]);
+    }
+}
+
+#endif