move keyhive exclusive boards into /keyhive (#16084)

Co-authored-by: Nick Brassel <nick@tzarc.org>

1 files changed, 0 insertions, 190 deletions

diff --git a/keyboards/honeycomb/matrix.c b/keyboards/honeycomb/matrix.c
deleted file mode 100755
index 9a87ca9a2e..0000000000
--- a/keyboards/honeycomb/matrix.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
-Copyright 2012 Jun Wako
-Copyright 2014 Jack Humbert
-Copyright 2019 @filoxo
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#include <stdint.h>
-#include <stdbool.h>
-#if defined(__AVR__)
-#include <avr/io.h>
-#endif
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "timer.h"
-#include "honeycomb.h"
-#include "pointing_device.h"
-#include "report.h"
-#include "uart.h"
-
-#if (MATRIX_COLS <= 8)
-# define print_matrix_header()  print("\nr/c 01234567\n")
-# define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
-# define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-# define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
-# define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
-# define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-# define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-# define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
-# define ROW_SHIFTER  ((uint32_t)1)
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-//extern int8_t encoderValue;
-int8_t encoderValue = 0;
-
-__attribute__ ((weak))
-void matrix_init_quantum(void) {
-    matrix_init_kb();
-}
-
-__attribute__ ((weak))
-void matrix_scan_quantum(void) {
-    matrix_scan_kb();
-}
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
-    matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void) {
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void) {
-    return MATRIX_COLS;
-}
-
-void matrix_init(void) {
-
-    matrix_init_quantum();
-    uart_init(1000000);
-}
-
-uint8_t matrix_scan(void)
-{
-    uint32_t timeout = 0;
-
-    // The 's' character requests the RF slave to send the matrix
-    uart_write('s');
-
-    // Trust the external keystates entirely, erase the last data
-    uint8_t uart_data[4] = {0};
-
-    // There are 3 bytes corresponding to the data, and a checksum
-    for (uint8_t i = 0; i < 4; i++) {
-        // Wait for the serial data, timeout if it's been too long
-        // This only happened in testing with a loose wire, but does no
-        // harm to leave it in here
-        while(!uart_available()){
-            timeout++;
-            if (timeout > 10000){
-                xprintf("\r\nTime out in keyboard.");
-                break;
-            }
-        }
-        uart_data[i] = uart_read();
-    }
-
-    // Check for the end packet, it's our checksum.
-    // Will only be a match if the correct bytes were recieved
-    if (uart_data[3] == (uart_data[0] ^ uart_data[1] ^ uart_data[2])) { // This is an arbitrary checksum calculated by XORing all the data.
-        // Transferring the keystates to the QMK matrix variable
-		/* ASSUMING MSB FIRST */
-		matrix[0] = ((uint16_t) uart_data[0] << 8) | ((uint16_t) uart_data[1]);
-		encoderValue += (int8_t) uart_data[2];
-		if ((uart_data[0] | uart_data[1] | uart_data[2])!=0){
-			xprintf("\r\n0x%0X%02X%02X",uart_data[0],uart_data[1], uart_data[2]);
-		}
-		/* OK, TURNS OUT THAT WAS A BAD ASSUMPTION */
-        for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-			// I've unpacked these into the mirror image of what QMK expects them to be, so...
-			matrix[i] = bitrev16(matrix[i]);
-			// So I'll reverse it, and this should be fine now.
-        }
-
-        // A mouse report for scrolling would go here, but I don't plan on doing scrolling with the encoder. So.
-
-    	report_mouse_t currentReport = {};
-/*
-    	currentReport = pointing_device_get_report();
-            //mouseReport.x = 127 max -127 min
-    	currentReport.x = (int8_t) uart_data[6];
-            //mouseReport.y = 127 max -127 min
-    	currentReport.y = (int8_t) uart_data[7];
-            //mouseReport.v = 127 max -127 min (scroll vertical)
-    	currentReport.v = (int8_t) uart_data[8];
-            //mouseReport.h = 127 max -127 min (scroll horizontal)
-    	currentReport.h = (int8_t) uart_data[9];
-        */
-    	/*
-    	currentReport.x = 0;
-    	currentReport.y = 0;
-    	currentReport.v = 0;
-        currentReport.h = 0;*/
-
-        pointing_device_set_report(currentReport);
-    } else {
-        xprintf("\r\nRequested packet, data 3 was %d",uart_data[3]);
-    }
-
-    matrix_scan_quantum();
-    return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print_matrix_header();
-
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        print_hex8(row); print(": ");
-        print_matrix_row(row);
-        print("\n");
-    }
-}