Merge remote-tracking branch 'origin/master' into develop

6 files changed, 52 insertions, 442 deletions

diff --git a/keyboards/handwired/dactyl/dactyl.c b/keyboards/handwired/dactyl/dactyl.c
index ff9b4e08af..be815777bd 100644
--- a/keyboards/handwired/dactyl/dactyl.c
+++ b/keyboards/handwired/dactyl/dactyl.c
@@ -1,5 +1,4 @@
 #include "dactyl.h"
-#include "i2cmaster.h"
 
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
diff --git a/keyboards/handwired/dactyl/dactyl.h b/keyboards/handwired/dactyl/dactyl.h
index cf53dce8fd..fe45d16681 100644
--- a/keyboards/handwired/dactyl/dactyl.h
+++ b/keyboards/handwired/dactyl/dactyl.h
@@ -3,12 +3,11 @@
 #include "quantum.h"
 #include <stdint.h>
 #include <stdbool.h>
-#include "i2cmaster.h"
+#include "i2c_master.h"
 #include <util/delay.h>
 
 #define I2C_ADDR        0b0100000
-#define I2C_ADDR_WRITE  ( (I2C_ADDR<<1) | I2C_WRITE )
-#define I2C_ADDR_READ   ( (I2C_ADDR<<1) | I2C_READ  )
+#define I2C_TIMEOUT     100
 #define IODIRA          0x00            // i/o direction register
 #define IODIRB          0x01
 #define GPPUA           0x0C            // GPIO pull-up resistor register
diff --git a/keyboards/handwired/dactyl/i2cmaster.h b/keyboards/handwired/dactyl/i2cmaster.h
deleted file mode 100644
index 3917b9e6c0..0000000000
--- a/keyboards/handwired/dactyl/i2cmaster.h
+++ /dev/null
@@ -1,178 +0,0 @@
-#ifndef _I2CMASTER_H
-#define _I2CMASTER_H   1
-/************************************************************************* 
-* Title:    C include file for the I2C master interface 
-*           (i2cmaster.S or twimaster.c)
-* Author:   Peter Fleury <pfleury@gmx.ch>  http://jump.to/fleury
-* File:     $Id: i2cmaster.h,v 1.10 2005/03/06 22:39:57 Peter Exp $
-* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3
-* Target:   any AVR device
-* Usage:    see Doxygen manual
-**************************************************************************/
-
-#ifdef DOXYGEN
-/**
- @defgroup pfleury_ic2master I2C Master library
- @code #include <i2cmaster.h> @endcode
-  
- @brief I2C (TWI) Master Software Library
-
- Basic routines for communicating with I2C slave devices. This single master 
- implementation is limited to one bus master on the I2C bus. 
-
- This I2c library is implemented as a compact assembler software implementation of the I2C protocol 
- which runs on any AVR (i2cmaster.S) and as a TWI hardware interface for all AVR with built-in TWI hardware (twimaster.c).
- Since the API for these two implementations is exactly the same, an application can be linked either against the
- software I2C implementation or the hardware I2C implementation.
-
- Use 4.7k pull-up resistor on the SDA and SCL pin.
- 
- Adapt the SCL and SDA port and pin definitions and eventually the delay routine in the module 
- i2cmaster.S to your target when using the software I2C implementation ! 
- 
- Adjust the  CPU clock frequence F_CPU in twimaster.c or in the Makfile when using the TWI hardware implementaion.
-
- @note 
-    The module i2cmaster.S is based on the Atmel Application Note AVR300, corrected and adapted 
-    to GNU assembler and AVR-GCC C call interface.
-    Replaced the incorrect quarter period delays found in AVR300 with 
-    half period delays. 
-    
- @author Peter Fleury pfleury@gmx.ch  http://jump.to/fleury
-
- @par API Usage Example
-  The following code shows typical usage of this library, see example test_i2cmaster.c
-
- @code
-
- #include <i2cmaster.h>
-
-
- #define Dev24C02  0xA2      // device address of EEPROM 24C02, see datasheet
-
- int main(void)
- {
-     unsigned char ret;
-
-     i2c_init();                             // initialize I2C library
-
-     // write 0x75 to EEPROM address 5 (Byte Write) 
-     i2c_start_wait(Dev24C02+I2C_WRITE);     // set device address and write mode
-     i2c_write(0x05);                        // write address = 5
-     i2c_write(0x75);                        // write value 0x75 to EEPROM
-     i2c_stop();                             // set stop conditon = release bus
-
-
-     // read previously written value back from EEPROM address 5 
-     i2c_start_wait(Dev24C02+I2C_WRITE);     // set device address and write mode
-
-     i2c_write(0x05);                        // write address = 5
-     i2c_rep_start(Dev24C02+I2C_READ);       // set device address and read mode
-
-     ret = i2c_readNak();                    // read one byte from EEPROM
-     i2c_stop();
-
-     for(;;);
- }
- @endcode
-
-*/
-#endif /* DOXYGEN */
-
-/**@{*/
-
-#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304
-#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !"
-#endif
-
-#include <avr/io.h>
-
-/** defines the data direction (reading from I2C device) in i2c_start(),i2c_rep_start() */
-#define I2C_READ    1
-
-/** defines the data direction (writing to I2C device) in i2c_start(),i2c_rep_start() */
-#define I2C_WRITE   0
-
-
-/**
- @brief initialize the I2C master interace. Need to be called only once 
- @param  void
- @return none
- */
-extern void i2c_init(void);
-
-
-/** 
- @brief Terminates the data transfer and releases the I2C bus 
- @param void
- @return none
- */
-extern void i2c_stop(void);
-
-
-/** 
- @brief Issues a start condition and sends address and transfer direction 
-  
- @param    addr address and transfer direction of I2C device
- @retval   0   device accessible 
- @retval   1   failed to access device 
- */
-extern unsigned char i2c_start(unsigned char addr);
-
-
-/**
- @brief Issues a repeated start condition and sends address and transfer direction 
-
- @param   addr address and transfer direction of I2C device
- @retval  0 device accessible
- @retval  1 failed to access device
- */
-extern unsigned char i2c_rep_start(unsigned char addr);
-
-
-/**
- @brief Issues a start condition and sends address and transfer direction 
-   
- If device is busy, use ack polling to wait until device ready 
- @param    addr address and transfer direction of I2C device
- @return   none
- */
-extern void i2c_start_wait(unsigned char addr);
-
- 
-/**
- @brief Send one byte to I2C device
- @param    data  byte to be transfered
- @retval   0 write successful
- @retval   1 write failed
- */
-extern unsigned char i2c_write(unsigned char data);
-
-
-/**
- @brief    read one byte from the I2C device, request more data from device 
- @return   byte read from I2C device
- */
-extern unsigned char i2c_readAck(void);
-
-/**
- @brief    read one byte from the I2C device, read is followed by a stop condition 
- @return   byte read from I2C device
- */
-extern unsigned char i2c_readNak(void);
-
-/** 
- @brief    read one byte from the I2C device
- 
- Implemented as a macro, which calls either i2c_readAck or i2c_readNak
- 
- @param    ack 1 send ack, request more data from device<br>
-               0 send nak, read is followed by a stop condition 
- @return   byte read from I2C device
- */
-extern unsigned char i2c_read(unsigned char ack);
-#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak(); 
-
-
-/**@}*/
-#endif
diff --git a/keyboards/handwired/dactyl/matrix.c b/keyboards/handwired/dactyl/matrix.c
index 615621522d..a21cd08e14 100644
--- a/keyboards/handwired/dactyl/matrix.c
+++ b/keyboards/handwired/dactyl/matrix.c
@@ -25,7 +25,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "dactyl.h"
-#include "i2cmaster.h"
+#include "i2c_master.h"
 #include "timer.h"
 
 
@@ -147,9 +147,6 @@ void init_expander(void) {
 #endif
     }
 
-    expander_status = i2c_start(I2C_ADDR_WRITE); if (expander_status) goto out;
-    expander_status = i2c_write(IODIRA);         if (expander_status) goto out;
-
     /*
     Pin direction and pull-up depends on both the diode direction
     and on whether the column register is GPIOA or GPIOB
@@ -164,50 +161,65 @@ void init_expander(void) {
 
 #if (EXPANDER_COL_REGISTER == GPIOA)
 #   if (DIODE_DIRECTION == COL2ROW)
-        expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out;
-        expander_status = i2c_write(0);                       if (expander_status) goto out;
+    uint8_t direction[2] = {
+        expander_input_pin_mask,
+        0,
+    };
 #   elif (DIODE_DIRECTION == ROW2COL)
-        expander_status = i2c_write(0);                       if (expander_status) goto out;
-        expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out;
+    uint8_t direction[2] = {
+        0,
+        expander_input_pin_mask,
+    };
 #   endif
 #elif (EXPANDER_COL_REGISTER == GPIOB)
 #   if (DIODE_DIRECTION == COL2ROW)
-        expander_status = i2c_write(0);                       if (expander_status) goto out;
-        expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out;
+    uint8_t direction[2] = {
+        0,
+        expander_input_pin_mask,
+    };
 #   elif (DIODE_DIRECTION == ROW2COL)
-        expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out;
-        expander_status = i2c_write(0);                       if (expander_status) goto out;
+    uint8_t direction[2] = {
+        expander_input_pin_mask,
+        0,
+    };
 #   endif
 #endif
 
-    i2c_stop();
-
     // set pull-up
     // - unused  : off : 0
     // - input   : on  : 1
     // - driving : off : 0
-    expander_status = i2c_start(I2C_ADDR_WRITE);              if (expander_status) goto out;
-    expander_status = i2c_write(GPPUA);                       if (expander_status) goto out;
 #if (EXPANDER_COL_REGISTER == GPIOA)
 #   if (DIODE_DIRECTION == COL2ROW)
-        expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out;
-        expander_status = i2c_write(0);                       if (expander_status) goto out;
+    uint8_t pullup[2] = {
+        expander_input_pin_mask,
+        0,
+    };
 #   elif (DIODE_DIRECTION == ROW2COL)
-        expander_status = i2c_write(0);                       if (expander_status) goto out;
-        expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out;
+    uint8_t pullup[2] = {
+        0,
+        expander_input_pin_mask,
+    };
 #   endif
 #elif (EXPANDER_COL_REGISTER == GPIOB)
 #   if (DIODE_DIRECTION == COL2ROW)
-        expander_status = i2c_write(0);                       if (expander_status) goto out;
-        expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out;
+    uint8_t pullup[2] = {
+        0,
+        expander_input_pin_mask,
+    };
 #   elif (DIODE_DIRECTION == ROW2COL)
-        expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out;
-        expander_status = i2c_write(0);                       if (expander_status) goto out;
+    uint8_t pullup[2] = {
+        expander_input_pin_mask,
+        0,
+    };
 #   endif
 #endif
 
-out:
-    i2c_stop();
+
+    expander_status = i2c_writeReg(I2C_ADDR, IODIRA, direction, 2, I2C_TIMEOUT);
+    if (expander_status) return;
+
+    expander_status = i2c_writeReg(I2C_ADDR, GPPUA, pullup, 2, I2C_TIMEOUT);
 }
 
 uint8_t matrix_scan(void)
@@ -337,14 +349,11 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
 
     // Read columns from expander, unless it's in an error state
     if (! expander_status) {
-        expander_status = i2c_start(I2C_ADDR_WRITE);           if (expander_status) goto out;
-        expander_status = i2c_write(EXPANDER_COL_REGISTER);    if (expander_status) goto out;
-        expander_status = i2c_start(I2C_ADDR_READ);            if (expander_status) goto out;
-
-        current_matrix[current_row] |= (~i2c_readNak()) & expander_input_pin_mask;
-
-        out:
-            i2c_stop();
+        uint8_t state = 0;
+        expander_status = i2c_readReg(I2C_ADDR, EXPANDER_COL_REGISTER, &state, 1, I2C_TIMEOUT);
+        if (! expander_status) {
+            current_matrix[current_row] |= (~state) & expander_input_pin_mask;
+        }
     }
 
     // Read columns from onboard pins
@@ -366,11 +375,8 @@ static void select_row(uint8_t row) {
     if (! expander_status) {
         // set active row low  : 0
         // set other rows hi-Z : 1
-        expander_status = i2c_start(I2C_ADDR_WRITE);           if (expander_status) goto out;
-        expander_status = i2c_write(EXPANDER_ROW_REGISTER);    if (expander_status) goto out;
-        expander_status = i2c_write(0xFF & ~(1<<row));         if (expander_status) goto out;
-    out:
-        i2c_stop();
+        uint8_t port = 0xFF & ~(1<<row);
+        expander_status = i2c_writeReg(I2C_ADDR, EXPANDER_ROW_REGISTER, &port, 1, I2C_TIMEOUT);
     }
 
     // select on teensy
@@ -426,13 +432,7 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
             return false;
         }
 
-        expander_status = i2c_start(I2C_ADDR_WRITE);           if (expander_status) goto out;
-        expander_status = i2c_write(EXPANDER_ROW_REGISTER);    if (expander_status) goto out;
-        expander_status = i2c_start(I2C_ADDR_READ);            if (expander_status) goto out;
-        column_state = i2c_readNak();
-
-        out:
-            i2c_stop();
+        expander_status = i2c_readReg(I2C_ADDR, EXPANDER_ROW_REGISTER, &column_state, 1, I2C_TIMEOUT);
 
         column_state = ~column_state;
     } else {
@@ -476,11 +476,8 @@ static void select_col(uint8_t col)
         } else {
             // set active col low  : 0
             // set other cols hi-Z : 1
-            expander_status = i2c_start(I2C_ADDR_WRITE);          if (expander_status) goto out;
-            expander_status = i2c_write(EXPANDER_COL_REGISTER);   if (expander_status) goto out;
-            expander_status = i2c_write(0xFF & ~(1<<col));        if (expander_status) goto out;
-        out:
-            i2c_stop();
+            uint8_t port = 0xFF & ~(1<<col);
+            expander_status = i2c_writeReg(I2C_ADDR, EXPANDER_COL_REGISTER, &port, 1, I2C_TIMEOUT);
         }
     } else {
         // select on teensy
diff --git a/keyboards/handwired/dactyl/rules.mk b/keyboards/handwired/dactyl/rules.mk
index cb5690ba75..7e97cb8458 100644
--- a/keyboards/handwired/dactyl/rules.mk
+++ b/keyboards/handwired/dactyl/rules.mk
@@ -28,5 +28,5 @@ SLEEP_LED_ENABLE        = no
 RGBLIGHT_ENABLE         = no
 
 # project specific files
-SRC = twimaster.c \
-	  matrix.c
+QUANTUM_LIB_SRC += i2c_master.c
+SRC += matrix.c
diff --git a/keyboards/handwired/dactyl/twimaster.c b/keyboards/handwired/dactyl/twimaster.c
deleted file mode 100644
index 41684d3a6d..0000000000
--- a/keyboards/handwired/dactyl/twimaster.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/*************************************************************************
-* Title:    I2C master library using hardware TWI interface
-* Author:   Peter Fleury <pfleury@gmx.ch>  http://jump.to/fleury
-* File:     $Id: twimaster.c,v 1.3 2005/07/02 11:14:21 Peter Exp $
-* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3
-* Target:   any AVR device with hardware TWI
-* Usage:    API compatible with I2C Software Library i2cmaster.h
-**************************************************************************/
-#include <inttypes.h>
-#include <compat/twi.h>
-
-#include "i2cmaster.h"
-
-/* define CPU frequency in Hz here if not defined in Makefile */
-#ifndef F_CPU
-#define F_CPU 16000000UL
-#endif
-
-/* I2C clock in Hz */
-#define SCL_CLOCK  400000L
-
-
-/*************************************************************************
- Initialization of the I2C bus interface. Need to be called only once
-*************************************************************************/
-void i2c_init(void)
-{
-  /* initialize TWI clock
-   * minimal values in Bit Rate Register (TWBR) and minimal Prescaler
-   * bits in the TWI Status Register should give us maximal possible
-   * I2C bus speed - about 444 kHz
-   *
-   * for more details, see 20.5.2 in ATmega16/32 secification
-   */
-
-  TWSR = 0;     /* no prescaler */
-  TWBR = 10;    /* must be >= 10 for stable operation */
-
-}/* i2c_init */
-
-
-/*************************************************************************
-  Issues a start condition and sends address and transfer direction.
-  return 0 = device accessible, 1= failed to access device
-*************************************************************************/
-unsigned char i2c_start(unsigned char address)
-{
-    uint8_t   twst;
-
-  // send START condition
-  TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-
-  // wait until transmission completed
-  while(!(TWCR & (1<<TWINT)));
-
-  // check value of TWI Status Register. Mask prescaler bits.
-  twst = TW_STATUS & 0xF8;
-  if ( (twst != TW_START) && (twst != TW_REP_START)) return 1;
-
-  // send device address
-  TWDR = address;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  // wail until transmission completed and ACK/NACK has been received
-  while(!(TWCR & (1<<TWINT)));
-
-  // check value of TWI Status Register. Mask prescaler bits.
-  twst = TW_STATUS & 0xF8;
-  if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1;
-
-  return 0;
-
-}/* i2c_start */
-
-
-/*************************************************************************
- Issues a start condition and sends address and transfer direction.
- If device is busy, use ack polling to wait until device is ready
-
- Input:   address and transfer direction of I2C device
-*************************************************************************/
-void i2c_start_wait(unsigned char address)
-{
-    uint8_t   twst;
-
-
-    while ( 1 )
-    {
-      // send START condition
-      TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-
-      // wait until transmission completed
-      while(!(TWCR & (1<<TWINT)));
-
-      // check value of TWI Status Register. Mask prescaler bits.
-      twst = TW_STATUS & 0xF8;
-      if ( (twst != TW_START) && (twst != TW_REP_START)) continue;
-
-      // send device address
-      TWDR = address;
-      TWCR = (1<<TWINT) | (1<<TWEN);
-
-      // wail until transmission completed
-      while(!(TWCR & (1<<TWINT)));
-
-      // check value of TWI Status Register. Mask prescaler bits.
-      twst = TW_STATUS & 0xF8;
-      if ( (twst == TW_MT_SLA_NACK )||(twst ==TW_MR_DATA_NACK) )
-      {
-          /* device busy, send stop condition to terminate write operation */
-          TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-
-          // wait until stop condition is executed and bus released
-          while(TWCR & (1<<TWSTO));
-
-          continue;
-      }
-      //if( twst != TW_MT_SLA_ACK) return 1;
-      break;
-     }
-
-}/* i2c_start_wait */
-
-
-/*************************************************************************
- Issues a repeated start condition and sends address and transfer direction
-
- Input:   address and transfer direction of I2C device
-
- Return:  0 device accessible
-          1 failed to access device
-*************************************************************************/
-unsigned char i2c_rep_start(unsigned char address)
-{
-    return i2c_start( address );
-
-}/* i2c_rep_start */
-
-
-/*************************************************************************
- Terminates the data transfer and releases the I2C bus
-*************************************************************************/
-void i2c_stop(void)
-{
-  /* send stop condition */
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-
-  // wait until stop condition is executed and bus released
-  while(TWCR & (1<<TWSTO));
-
-}/* i2c_stop */
-
-
-/*************************************************************************
-  Send one byte to I2C device
-
-  Input:    byte to be transfered
-  Return:   0 write successful
-            1 write failed
-*************************************************************************/
-unsigned char i2c_write( unsigned char data )
-{
-    uint8_t   twst;
-
-  // send data to the previously addressed device
-  TWDR = data;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  // wait until transmission completed
-  while(!(TWCR & (1<<TWINT)));
-
-  // check value of TWI Status Register. Mask prescaler bits
-  twst = TW_STATUS & 0xF8;
-  if( twst != TW_MT_DATA_ACK) return 1;
-  return 0;
-
-}/* i2c_write */
-
-
-/*************************************************************************
- Read one byte from the I2C device, request more data from device
-
- Return:  byte read from I2C device
-*************************************************************************/
-unsigned char i2c_readAck(void)
-{
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
-  while(!(TWCR & (1<<TWINT)));
-
-  return TWDR;
-
-}/* i2c_readAck */
-
-
-/*************************************************************************
- Read one byte from the I2C device, read is followed by a stop condition
-
- Return:  byte read from I2C device
-*************************************************************************/
-unsigned char i2c_readNak(void)
-{
-  TWCR = (1<<TWINT) | (1<<TWEN);
-  while(!(TWCR & (1<<TWINT)));
-
-  return TWDR;
-
-}/* i2c_readNak */