diff options
| author | William Chang <william@factual.com> | 2019-11-20 22:17:07 -0800 |
|---|---|---|
| committer | William Chang <william@factual.com> | 2019-11-20 22:17:07 -0800 |
| commit | e7f4d56592b3975c38af329e77b4efd9108495e8 (patch) | |
| tree | 0a416bccbf70bfdbdb9ffcdb3bf136b47378c014 /keyboards/geekboards/tester | |
| parent | 71493b2f9bbd5f3d18373c518fa14ccafcbf48fc (diff) | |
| parent | 8416a94ad27b3ff058576f09f35f0704a8b39ff3 (diff) | |
Merge remote-tracking branch 'upstream/master'
Diffstat (limited to 'keyboards/geekboards/tester')
| -rw-r--r-- | keyboards/geekboards/tester/config.h | 3 | ||||
| -rw-r--r-- | keyboards/geekboards/tester/rules.mk | 52 |
2 files changed, 10 insertions, 45 deletions
diff --git a/keyboards/geekboards/tester/config.h b/keyboards/geekboards/tester/config.h index ac67877ffc..8a6cc09a12 100644 --- a/keyboards/geekboards/tester/config.h +++ b/keyboards/geekboards/tester/config.h @@ -23,6 +23,7 @@ #define LOCKING_RESYNC_ENABLE #define DEBOUNCE 3 +#ifdef RGB_MATRIX_ENABLE #define RGB_DISABLE_AFTER_TIMEOUT 0 #define RGB_DISABLE_WHEN_USB_SUSPENDED true #define RGB_MATRIX_KEYPRESSES @@ -32,8 +33,8 @@ #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH #define DRIVER_ADDR_1 0b1110100 #define DRIVER_ADDR_2 0b1110101 - #define DRIVER_COUNT 2 #define DRIVER_1_LED_TOTAL 8 #define DRIVER_2_LED_TOTAL 0 #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +#endif
\ No newline at end of file diff --git a/keyboards/geekboards/tester/rules.mk b/keyboards/geekboards/tester/rules.mk index 7e8d595fb7..1ca57f6d09 100644 --- a/keyboards/geekboards/tester/rules.mk +++ b/keyboards/geekboards/tester/rules.mk @@ -1,52 +1,16 @@ # MCU name MCU = atmega32u4 -# project specific files -#SRC = - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = qmk-dfu -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. - # Build Options # change yes to no to disable # |