summaryrefslogtreecommitdiff
path: root/keyboards/dichotomy
diff options
context:
space:
mode:
authorQMK Bot <hello@qmk.fm>2021-02-05 22:21:23 +0000
committerQMK Bot <hello@qmk.fm>2021-02-05 22:21:23 +0000
commit843643aef36165ee6b00a52e19a272e69f19e6e1 (patch)
treee033218c8d1c6fed65b360e684b41530e96dca8a /keyboards/dichotomy
parentc3eee3a842366497abeacc22c02020622a339c46 (diff)
parent5ea92a9c1cbe3e20bf4830d550d797a8e9650da8 (diff)
Merge remote-tracking branch 'origin/master' into develop
Diffstat (limited to 'keyboards/dichotomy')
-rw-r--r--keyboards/dichotomy/config.h18
-rwxr-xr-xkeyboards/dichotomy/dichotomy.c16
-rwxr-xr-xkeyboards/dichotomy/matrix.c3
-rwxr-xr-xkeyboards/dichotomy/rules.mk11
4 files changed, 8 insertions, 40 deletions
diff --git a/keyboards/dichotomy/config.h b/keyboards/dichotomy/config.h
index 05210198c8..0cdaf776b4 100644
--- a/keyboards/dichotomy/config.h
+++ b/keyboards/dichotomy/config.h
@@ -60,19 +60,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//UART settings for communication with the RF microcontroller
#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_DATA UDR1
-#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
-#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT() do { \
- /* baud rate */ \
- UBRR1L = SERIAL_UART_UBRR; \
- /* baud rate */ \
- UBRR1H = SERIAL_UART_UBRR >> 8; \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
- } while(0)
+#define SERIAL_UART_INIT_CUSTOM \
+ /* enable TX and RX */ \
+ UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
+ /* 8-bit data */ \
+ UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
#endif
diff --git a/keyboards/dichotomy/dichotomy.c b/keyboards/dichotomy/dichotomy.c
index b94030a376..967d7e603c 100755
--- a/keyboards/dichotomy/dichotomy.c
+++ b/keyboards/dichotomy/dichotomy.c
@@ -1,12 +1,7 @@
#include "dichotomy.h"
-void uart_init(void) {
- SERIAL_UART_INIT();
-}
-
void pointing_device_task(void){
/*report_mouse_t currentReport = {};
- SERIAL_UART_INIT();
uint32_t timeout = 0;
//the m character requests the RF slave to send the mouse report
@@ -77,16 +72,5 @@ void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
- uart_init();
led_init();
}
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
- matrix_scan_user();
-}
-
-void led_set_kb(uint8_t usb_led) {
-
-}
diff --git a/keyboards/dichotomy/matrix.c b/keyboards/dichotomy/matrix.c
index d93889e6ad..2400753cc1 100755
--- a/keyboards/dichotomy/matrix.c
+++ b/keyboards/dichotomy/matrix.c
@@ -29,6 +29,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "dichotomy.h"
#include "pointing_device.h"
#include "report.h"
+#include "protocol/serial.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
@@ -93,11 +94,11 @@ uint8_t matrix_cols(void) {
void matrix_init(void) {
matrix_init_quantum();
+ serial_init();
}
uint8_t matrix_scan(void)
{
- SERIAL_UART_INIT();
//xprintf("\r\nTRYING TO SCAN");
uint32_t timeout = 0;
diff --git a/keyboards/dichotomy/rules.mk b/keyboards/dichotomy/rules.mk
index 14dc474359..d6f98125ee 100755
--- a/keyboards/dichotomy/rules.mk
+++ b/keyboards/dichotomy/rules.mk
@@ -29,14 +29,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
UNICODE_ENABLE = YES # Unicode
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
-USB = /dev/ttyACM0
-
-OPT_DEFS += -DDICHOTOMY_PROMICRO
-DICHOTOMY_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
- avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
-
# # project specific files
-SRC = matrix.c
-
-#upload: build
-# $(DICHOTOMY_UPLOAD_COMMAND)
+SRC += matrix.c serial_uart.c