Merge remote-tracking branch 'upstream/master' into develop

11 files changed, 566 insertions, 0 deletions

diff --git a/keyboards/custommk/evo70_r2/config.h b/keyboards/custommk/evo70_r2/config.h
new file mode 100644
index 0000000000..25ab789d75
--- /dev/null
+++ b/keyboards/custommk/evo70_r2/config.h
@@ -0,0 +1,90 @@
+/* Copyright 2023 David Hoelscher (@customMK)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// No VBUS sense needed
+#define BOARD_OTG_NOVBUSSENS 1
+
+#define STM32_LSECLK 32768
+
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+#define MATRIX_ROW_PINS { A8, A1, A2, B1, A7 }
+
+// FRAM configuration
+#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A0
+#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 4 // 48MHz / 4 = 12MHz; max supported by MB85R64 is 20MHz
+
+// External flash configuration
+#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN B12
+#define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR 1  // 48MHz; max supported by W25Q128JV is 133MHz
+#define EXTERNAL_FLASH_SIZE (16 * 1024 * 1024)  //128Mbit or 16MByte
+#define EXTERNAL_FLASH_SPI_TIMEOUT 200000 //datasheet max is 200seconds for flash chip erase
+
+// SPI Configuration
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN B3
+#define SPI_SCK_PAL_MODE 5
+#define SPI_MOSI_PIN B5
+#define SPI_MOSI_PAL_MODE 5
+#define SPI_MISO_PIN B4
+#define SPI_MISO_PAL_MODE 5
+
+
+// SPI LCD Configuration
+#define LCD_RST_PIN B2
+#define LCD_CS_PIN A9
+#define LCD_DC_PIN B0
+#ifndef LCD_ACTIVITY_TIMEOUT
+    #define LCD_ACTIVITY_TIMEOUT 30000
+#endif
+
+// I2C OLED Configuration
+#define I2C1_SCL_PIN B6
+#define I2C1_SDA_PIN B9
+
+#define I2C1_CLOCK_SPEED 400000
+#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
+
+#define OLED_DISABLE_TIMEOUT
+
+#define COL_SHIFT_IN_PIN B14
+#define COL_SHIFT_CLK_PIN B15
+
+#define QUANTUM_PAINTER_SUPPORTS_256_PALETTE TRUE
+#define QUANTUM_PAINTER_SUPPORTS_NATIVE_COLORS TRUE
+
+#define OLED_UPDATE_INTERVAL 66
+
+#define BACKLIGHT_PWM_DRIVER PWMD3
+#define BACKLIGHT_PWM_CHANNEL 1
+#define BACKLIGHT_PAL_MODE 2
+
+#define WS2812_PWM_DRIVER PWMD1
+#define WS2812_PWM_CHANNEL 3
+#define WS2812_PWM_PAL_MODE 1
+#define WS2812_DMA_STREAM STM32_DMA2_STREAM5
+#define WS2812_DMA_CHANNEL 6
+
+#define TAP_CODE_DELAY 10
+
+#define AUDIO_PIN B8
+#define AUDIO_PWM_DRIVER PWMD4
+#define AUDIO_PWM_CHANNEL 3 
+#define AUDIO_PWM_PAL_MODE 2
+#define AUDIO_STATE_TIMER GPTD5
+#define AUDIO_INIT_DELAY
diff --git a/keyboards/custommk/evo70_r2/halconf.h b/keyboards/custommk/evo70_r2/halconf.h
new file mode 100644
index 0000000000..5268fe5de6
--- /dev/null
+++ b/keyboards/custommk/evo70_r2/halconf.h
@@ -0,0 +1,36 @@
+/* Copyright 2023 David Hoelscher (@customMK)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_I2C TRUE
+
+#define HAL_USE_PWM TRUE
+
+#define HAL_USE_RTC TRUE
+
+#define HAL_USE_SPI TRUE
+
+#define HAL_USE_GPT TRUE
+
+#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+
+#define SERIAL_BUFFERS_SIZE 256
+
+// This enables interrupt-driven mode
+#define SPI_USE_WAIT TRUE
+
+#include_next <halconf.h>
diff --git a/keyboards/custommk/evo70_r2/info.json b/keyboards/custommk/evo70_r2/info.json
new file mode 100644
index 0000000000..772325e7f8
--- /dev/null
+++ b/keyboards/custommk/evo70_r2/info.json
@@ -0,0 +1,152 @@
+{
+    "keyboard_name": "EVO70 R2", 
+    "url": "https://shop.custommk.com/collections/evo70/products/evo70", 
+    "maintainer": "customMK", 
+    "manufacturer": "customMK",
+    "tags": ["70%", "encoder", "underglow", "backlight"],
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+        "encoder": true,
+        "quantum_painter": true,
+        "oled": true,
+        "rgblight": true,
+        "backlight": true,
+        "audio": true
+    },
+    "usb": {
+        "vid": "0xF35B",
+        "pid": "0xFAB6",
+        "device_version": "1.0.0"
+    },
+    "diode_direction": "ROW2COL",
+    "processor": "STM32F411",
+    "bootloader": "stm32-dfu",
+    "rgblight": {
+        "led_count": 48,
+        "hue_steps": 4,
+        "saturation_steps": 8,
+        "brightness_steps": 4,
+        "max_brightness": 128,
+        "layers": {
+            "enabled": true
+        },
+        "animations": {
+            "alternating": true,
+            "breathing": true,
+            "christmas": true,
+            "knight": true,
+            "rainbo_mood": true,
+            "rainbow_swirl": true,
+            "rgb_test": true,
+            "snake": true,
+            "static_gradient": true,
+            "twinkle": true
+        }
+    },
+    "ws2812": {
+        "driver": "pwm",
+        "pin": "A10"
+    },
+    "backlight": {
+        "driver": "pwm",
+        "breathing": true,
+        "breathing_period": 6,
+        "levels": 17,
+        "pin": "A6"
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Encoder", "matrix": [1, 0], "x":0.5, "y":0},
+                {"label":"Esc", "matrix": [0, 0], "x":2.5, "y":0},
+                {"label":"1", "matrix": [0, 2], "x":3.5, "y":0},
+                {"label":"2", "matrix": [0, 3], "x":4.5, "y":0},
+                {"label":"3", "matrix": [0, 4], "x":5.5, "y":0},
+                {"label":"4", "matrix": [0, 5], "x":6.5, "y":0},
+                {"label":"5", "matrix": [0, 6], "x":7.5, "y":0},
+                {"label":"6", "matrix": [0, 7], "x":8.5, "y":0},
+                {"label":"7", "matrix": [0, 8], "x":9.5, "y":0},
+                {"label":"8", "matrix": [0, 9], "x":10.5, "y":0},
+                {"label":"9", "matrix": [0, 10], "x":11.5, "y":0},
+                {"label":"0", "matrix": [0, 11], "x":12.5, "y":0},
+                {"label":"-", "matrix": [0, 12], "x":13.5, "y":0},
+                {"label":"=", "matrix": [0, 13], "x":14.5, "y":0},
+                {"label":"Backspace", "matrix": [0, 14], "x":15.5, "y":0, "w":2},
+                {"label":"Delete", "matrix": [0, 15], "x":17.5, "y":0},
+
+                {"label":"Tab", "matrix": [1, 1], "x":2.5, "y":1, "w":1.5},
+                {"label":"Q", "matrix": [1, 2], "x":4, "y":1},
+                {"label":"W", "matrix": [1, 3], "x":5, "y":1},
+                {"label":"E", "matrix": [1, 4], "x":6, "y":1},
+                {"label":"R", "matrix": [1, 5], "x":7, "y":1},
+                {"label":"T", "matrix": [1, 6], "x":8, "y":1},
+                {"label":"Y", "matrix": [1, 7], "x":9, "y":1},
+                {"label":"U", "matrix": [1, 8], "x":10, "y":1},
+                {"label":"I", "matrix": [1, 9], "x":11, "y":1},
+                {"label":"O", "matrix": [1, 10], "x":12, "y":1},
+                {"label":"P", "matrix": [1, 11], "x":13, "y":1},
+                {"label":"[", "matrix": [1, 12], "x":14, "y":1},
+                {"label":"]", "matrix": [1, 13], "x":15, "y":1},
+                {"label":"\\", "matrix": [1, 14], "x":16, "y":1, "w":1.5},
+                {"label":"PgUp", "matrix": [1, 15], "x":17.5, "y":1},
+
+                {"label":"F1", "matrix": [2, 2], "x":0, "y":2},
+                {"label":"F2", "matrix": [2, 0], "x":1, "y":2},
+                {"label":"Caps Lock", "matrix": [2, 1], "x":2.5, "y":2, "w":1.75},
+                {"label":"A", "matrix": [2, 3], "x":4.25, "y":2},
+                {"label":"S", "matrix": [2, 4], "x":5.25, "y":2},
+                {"label":"D", "matrix": [2, 5], "x":6.25, "y":2},
+                {"label":"F", "matrix": [2, 6], "x":7.25, "y":2},
+                {"label":"G", "matrix": [2, 7], "x":8.25, "y":2},
+                {"label":"H", "matrix": [2, 8], "x":9.25, "y":2},
+                {"label":"J", "matrix": [2, 9], "x":10.25, "y":2},
+                {"label":"K", "matrix": [2, 10], "x":11.25, "y":2},
+                {"label":"L", "matrix": [2, 11], "x":12.25, "y":2},
+                {"label":";", "matrix": [2, 12], "x":13.25, "y":2},
+                {"label":"'", "matrix": [2, 13], "x":14.25, "y":2},
+                {"label":"Enter", "matrix": [2, 14], "x":15.25, "y":2, "w":2.25},
+                {"label":"PgDn", "matrix": [2, 15], "x":17.5, "y":2},
+
+                {"label":"F3", "matrix": [3, 1], "x":0, "y":3},
+                {"label":"F4", "matrix": [3, 0], "x":1, "y":3},
+                {"label":"Shift", "matrix": [3, 2], "x":2.5, "y":3, "w":1.25},
+                {"label":"\u2298", "matrix": [0, 1], "x":3.75, "y":3, "w":1},
+                {"label":"Z", "matrix": [3, 3], "x":4.75, "y":3},
+                {"label":"X", "matrix": [3, 4], "x":5.75, "y":3},
+                {"label":"C", "matrix": [3, 5], "x":6.75, "y":3},
+                {"label":"V", "matrix": [3, 6], "x":7.75, "y":3},
+                {"label":"B", "matrix": [3, 7], "x":8.75, "y":3},
+                {"label":"N", "matrix": [3, 8], "x":9.75, "y":3},
+                {"label":"M", "matrix": [3, 9], "x":10.75, "y":3},
+                {"label":",", "matrix": [3, 10], "x":11.75, "y":3},
+                {"label":".", "matrix": [3, 11], "x":12.75, "y":3},
+                {"label":"/", "matrix": [3, 12], "x":13.75, "y":3},
+                {"label":"Shift", "matrix": [3, 13], "x":14.75, "y":3, "w":1.75},
+                {"label":"Up", "matrix": [3, 14], "x":16.5, "y":3},
+                {"label":"End", "matrix": [3, 15], "x":17.5, "y":3},
+
+                {"label":"F5", "matrix": [4, 3], "x":0, "y":4},
+                {"label":"F6", "matrix": [4, 0], "x":1, "y":4},
+                {"label":"Ctrl", "matrix": [4, 1], "x":2.5, "y":4, "w":1.25},
+                {"label":"GUI", "matrix": [4, 2], "x":3.75, "y":4, "w":1.25},
+                {"label":"Alt", "matrix": [4, 4], "x":5, "y":4, "w":1.25},
+                {"label":"Space", "matrix": [4, 7], "x":6.25, "y":4, "w":6.25},
+                {"label":"Alt", "matrix": [4, 10], "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "matrix": [4, 11], "x":13.75, "y":4, "w":1.25},
+                {"label":"Left", "matrix": [4, 13], "x":15.5, "y":4},
+                {"label":"Down", "matrix": [4, 14], "x":16.5, "y":4},
+                {"label":"Right", "matrix": [4, 15], "x":17.5, "y":4}
+            ]
+        }
+    },
+    "encoder": {
+        "rotary": [
+            { "pin_a": "B7",  "pin_b": "A4", "resolution": 2}
+        ]
+    }
+}
\ No newline at end of file
diff --git a/keyboards/custommk/evo70_r2/keymaps/default/keymap.c b/keyboards/custommk/evo70_r2/keymaps/default/keymap.c
new file mode 100644
index 0000000000..9dc7beabdd
--- /dev/null
+++ b/keyboards/custommk/evo70_r2/keymaps/default/keymap.c
@@ -0,0 +1,33 @@
+/* Copyright 2023 David Hoelscher (@customMK)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT(
+			KC_ESC,	      KC_ESC, KC_1,    KC_2,    KC_3,    KC_4,     KC_5,    KC_6,     KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL, 
+						  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,     KC_T,    KC_Y,     KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, 
+		KC_F1,   KC_F2,   KC_CAPS, 			KC_A,    KC_S,    KC_D,     KC_F,    KC_G,     KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_PGDN, 
+	    KC_F3,   KC_F4,	  KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,     KC_V,    KC_B,     KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END, 
+		KC_F5,   KC_F6,   KC_LCTL, KC_LWIN,          KC_LALT,                    KC_SPACE,                   KC_RALT, KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT),
+};
+
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [0] =   { ENCODER_CCW_CW(KC_VOLD, KC_VOLU),
+};
+#endif
\ No newline at end of file
diff --git a/keyboards/custommk/evo70_r2/keymaps/via/config.h b/keyboards/custommk/evo70_r2/keymaps/via/config.h
new file mode 100644
index 0000000000..52e3afa69f
--- /dev/null
+++ b/keyboards/custommk/evo70_r2/keymaps/via/config.h
@@ -0,0 +1,13 @@
+// Copyright 2023 David Hoelscher (@customMK)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+// With 8k FRAM, max out dynamic keymap layers and macros
+// 5x16 matrix (160 bytes) and one encoder (4 bytes) consume 164 bytes per layer
+// 32 layers consumes 5248 bytes
+#define DYNAMIC_KEYMAP_LAYER_COUNT 32
+
+// Most of the remaining space can be used for macros
+// QMK Macro keycode range allows up to 128 macros
+#define DYNAMIC_KEYMAP_MACRO_COUNT 128
diff --git a/keyboards/custommk/evo70_r2/keymaps/via/keymap.c b/keyboards/custommk/evo70_r2/keymaps/via/keymap.c
new file mode 100644
index 0000000000..a971aa4e28
--- /dev/null
+++ b/keyboards/custommk/evo70_r2/keymaps/via/keymap.c
@@ -0,0 +1,33 @@
+/* Copyright 2023 David Hoelscher (@customMK)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT(
+			KC_ESC,	      KC_ESC, KC_1,    KC_2,    KC_3,    KC_4,     KC_5,    KC_6,     KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL, 
+						  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,     KC_T,    KC_Y,     KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, 
+		KC_F1,   KC_F2,   KC_CAPS, 			KC_A,    KC_S,    KC_D,     KC_F,    KC_G,     KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_PGDN, 
+	    KC_F3,   KC_F4,	  KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,     KC_V,    KC_B,     KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END, 
+		KC_F5,   KC_F6,   KC_LCTL, KC_LWIN,          KC_LALT,                    KC_SPACE,                   KC_RALT, KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT),
+};
+
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [0] =   { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }
+};
+#endif
\ No newline at end of file
diff --git a/keyboards/custommk/evo70_r2/keymaps/via/rules.mk b/keyboards/custommk/evo70_r2/keymaps/via/rules.mk
new file mode 100644
index 0000000000..4253f570f0
--- /dev/null
+++ b/keyboards/custommk/evo70_r2/keymaps/via/rules.mk
@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+ENCODER_MAP_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/custommk/evo70_r2/matrix.c b/keyboards/custommk/evo70_r2/matrix.c
new file mode 100644
index 0000000000..99a23a4542
--- /dev/null
+++ b/keyboards/custommk/evo70_r2/matrix.c
@@ -0,0 +1,117 @@
+// Copyright 2023 David Hoelscher (@customMK)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include "quantum.h"
+
+// Pin definitions
+static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+
+void matrix_wait_for_pin(pin_t pin, uint8_t target_state) {
+    rtcnt_t start = chSysGetRealtimeCounterX();
+    rtcnt_t end   = start + 5000;
+    while (chSysIsCounterWithinX(chSysGetRealtimeCounterX(), start, end)) {
+        if (readPin(pin) == target_state) {
+            break;
+        }
+    }
+}
+
+void matrix_wait_for_port(stm32_gpio_t *port, uint32_t target_bitmask) {
+    rtcnt_t start = chSysGetRealtimeCounterX();
+    rtcnt_t end   = start + 5000;
+    while (chSysIsCounterWithinX(chSysGetRealtimeCounterX(), start, end)) {
+        if ((palReadPort(port) & target_bitmask) == target_bitmask) {
+            break;
+        }
+    }
+}
+
+void shift_pulse_clock(void) {
+        writePinHigh(COL_SHIFT_CLK_PIN);
+        matrix_wait_for_pin(COL_SHIFT_CLK_PIN, 1);
+        writePinLow(COL_SHIFT_CLK_PIN);
+}
+
+void matrix_init_custom(void) {
+    //set all row pins as input with pullups
+    for (int i = 0; i < MATRIX_ROWS; ++i) {
+        writePinHigh(row_pins[i]);
+        setPinInputHigh(row_pins[i]);
+    }
+
+    //set all column pins high in ROW2COL matrix
+    setPinOutput(COL_SHIFT_IN_PIN);
+    setPinOutput(COL_SHIFT_CLK_PIN);
+    writePinHigh(COL_SHIFT_IN_PIN);
+    matrix_wait_for_pin(COL_SHIFT_IN_PIN, 1);
+
+    for (int i = 0; i < MATRIX_COLS; ++i) {
+        shift_pulse_clock();
+    }
+
+}
+
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+    static matrix_row_t temp_matrix[MATRIX_ROWS] = {0};
+
+    writePinLow(COL_SHIFT_IN_PIN);
+    matrix_wait_for_pin(COL_SHIFT_IN_PIN, 0);
+
+    // Setup the output column pin
+    shift_pulse_clock();
+
+    writePinHigh(COL_SHIFT_IN_PIN);
+    for (int current_col = 0; current_col < MATRIX_COLS; ++current_col) {
+
+        // Read the column ports
+        uint32_t gpio_a = palReadPort(GPIOA);
+        uint32_t gpio_b = palReadPort(GPIOB);
+        
+        // row 0, pin A8
+        int current_row = 0;
+        if ((gpio_a & (1 << 8)) >> 8) {
+            temp_matrix[current_row] &= ~(1ul << current_col);
+        } else {
+            temp_matrix[current_row] |= (1ul << current_col);
+        }
+        // row 1, pin A1
+        current_row = 1;
+        if ((gpio_a & (1 << 1)) >> 1) {
+            temp_matrix[current_row] &= ~(1ul << current_col);
+        } else {
+            temp_matrix[current_row] |= (1ul << current_col);
+        }
+        // row 2, pin A2
+        current_row = 2;
+        if ((gpio_a & (1 << 2)) >> 2) {
+            temp_matrix[current_row] &= ~(1ul << current_col);
+        } else {
+            temp_matrix[current_row] |= (1ul << current_col);
+        }
+        // row 3, pin B3
+        current_row = 3;
+        if ((gpio_b & (1 << 1)) >> 1) {
+            temp_matrix[current_row] &= ~(1ul << current_col);
+        } else {
+            temp_matrix[current_row] |= (1ul << current_col);
+        }
+        // row 4, pin A7
+        current_row = 4;
+        if ((gpio_a & (1 << 7)) >> 7) {
+            temp_matrix[current_row] &= ~(1ul << current_col);
+        } else {
+            temp_matrix[current_row] |= (1ul << current_col);
+        }
+        
+        // Setup the output column pin
+        shift_pulse_clock();
+    
+    }
+
+    // Check if matrix has changed, return the last-read data
+    bool changed = memcmp(current_matrix, temp_matrix, sizeof(temp_matrix)) != 0;
+    if (changed) {
+        memcpy(current_matrix, temp_matrix, sizeof(temp_matrix));
+    }
+    shift_pulse_clock();
+    return changed;
+}
diff --git a/keyboards/custommk/evo70_r2/mcuconf.h b/keyboards/custommk/evo70_r2/mcuconf.h
new file mode 100644
index 0000000000..afaa692ab8
--- /dev/null
+++ b/keyboards/custommk/evo70_r2/mcuconf.h
@@ -0,0 +1,58 @@
+/* Copyright 2023 David Hoelscher (@customMK)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_LSE_ENABLED
+#define STM32_LSE_ENABLED TRUE
+
+#undef STM32_RTCSEL
+#define STM32_RTCSEL STM32_RTCSEL_LSE
+
+// Used for underglow
+#undef STM32_PWM_USE_TIM1 //timer 1 channel 3
+#define STM32_PWM_USE_TIM1 TRUE
+
+// Used for backlight
+//#undef STM32_PWM_USE_TIM2 //timer 2 channel ?
+//#define STM32_PWM_USE_TIM2 TRUE
+
+// Used for backlight
+#undef STM32_PWM_USE_TIM3 //timer 3 channel 1
+#define STM32_PWM_USE_TIM3 TRUE
+
+// Used for backlight
+//#undef STM32_GPT_USE_TIM3 //timer 3 channel 1
+//#define STM32_GPT_USE_TIM3 TRUE
+
+// Used for backlight
+#undef STM32_PWM_USE_TIM4 //timer 4 channel ?
+#define STM32_PWM_USE_TIM4 TRUE
+
+// Used for backlight
+#undef STM32_GPT_USE_TIM5 //timer 5 channel ?
+#define STM32_GPT_USE_TIM5 TRUE
+
+// Used for FRAM and flash in example code
+#undef STM32_SPI_USE_SPI1
+#define STM32_SPI_USE_SPI1 TRUE
+
+// Used for OLED
+#undef STM32_I2C_USE_I2C1
+#define STM32_I2C_USE_I2C1 TRUE
+
diff --git a/keyboards/custommk/evo70_r2/readme.md b/keyboards/custommk/evo70_r2/readme.md
new file mode 100644
index 0000000000..ac2f638cb2
--- /dev/null
+++ b/keyboards/custommk/evo70_r2/readme.md
@@ -0,0 +1,21 @@
+# EVO70 R2
+
+EVO70 R2 is a 70% keyboard (65% w/left side function cluster) designed and produced by customMK. 
+
+![EVO70 R2](https://i.imgur.com/B1QMuIxh.jpeg)
+
+* Keyboard Maintainer: [customMK](https://github.com/customMK)
+* Hardware Supported: EVO70 R2
+* Hardware Availability: [customMK](https://shop.custommk.com/collections/evo70/products/evo70)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make custommk/evo70_r2:default
+
+Flashing example for this keyboard:
+
+    make custommk/evo70_r2:default:flash
+
+To enter the bootloader, run the flashing command above, and then either plug in the USB connection while holding the top-left key, or alternatively, plug in the USB connection and then press the reset button on the PCB located under the space bar.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/custommk/evo70_r2/rules.mk b/keyboards/custommk/evo70_r2/rules.mk
new file mode 100644
index 0000000000..b79d08c6b7
--- /dev/null
+++ b/keyboards/custommk/evo70_r2/rules.mk
@@ -0,0 +1,11 @@
+AUDIO_DRIVER = pwm_hardware
+
+# project specific files
+SRC += matrix.c 
+
+EEPROM_DRIVER = spi
+
+QUANTUM_PAINTER_DRIVERS = st7735_spi
+
+CUSTOM_MATRIX = lite
+CIE1931_CURVE = yes
\ No newline at end of file