[Keyboard] move cu24, cu75, cu80/v1 into capsunlocked folder (#15758)

8 files changed, 0 insertions, 282 deletions

diff --git a/keyboards/cu24/config.h b/keyboards/cu24/config.h
deleted file mode 100644
index a2a4e727ff..0000000000
--- a/keyboards/cu24/config.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/* Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x0000
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    Yiancar/CapsUnlocked
-#define PRODUCT         CU24
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 4
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6, F5, B4, B6, C6, C7 }
-#define MATRIX_COL_PINS { F0, F1, D0, D1 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
-/* Backlight */
-#define BACKLIGHT_PIN B5
-#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 5
-
-/* RGB Glow */
-#define RGB_DI_PIN F4     // The pin the LED strip is connected to
-#define RGBLED_NUM 5     // Number of LEDs in your strip
-#define RGBLIGHT_ANIMATIONS
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
diff --git a/keyboards/cu24/cu24.c b/keyboards/cu24/cu24.c
deleted file mode 100644
index 0c976f076f..0000000000
--- a/keyboards/cu24/cu24.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "cu24.h"
diff --git a/keyboards/cu24/cu24.h b/keyboards/cu24/cu24.h
deleted file mode 100644
index 8e3daa4758..0000000000
--- a/keyboards/cu24/cu24.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-#define XXX KC_NO
-
-// This a shortcut to help you visually see your layout.
-// The following is an example using the Planck MIT layout
-// The first section contains all of the arguments
-// The second converts the arguments into a two-dimensional array
-#define LAYOUT_grid( \
-    k00, k01, k02, k03, \
-    k10, k11, k12, k13, \
-    k20, k21, k22, k23, \
-    k30, k31, k32, k33, \
-    k40, k41, k42, k43, \
-    k50, k51, k52, k53 \
-) { \
-    { k00, k01, k02, k03 }, \
-    { k10, k11, k12, k13 }, \
-    { k20, k21, k22, k23 }, \
-    { k30, k31, k32, k33 }, \
-    { k40, k41, k42, k43 }, \
-    { k50, k51, k52, k53 } \
-}
-
-#define LAYOUT_numpad( \
-    k00, k01, k02, k03, \
-    k10, k11, k12, k13, \
-    k20, k21, k22, k23, \
-    k30, k31, k32, \
-    k40, k41, k42, k43, \
-         k51, k52 \
-) { \
-    { k00, k01, k02, k03 }, \
-    { k10, k11, k12, k13 }, \
-    { k20, k21, k22, k23 }, \
-    { k30, k31, k32, XXX }, \
-    { k40, k41, k42, k43 }, \
-    { XXX, k51, k52, XXX } \
-}
diff --git a/keyboards/cu24/info.json b/keyboards/cu24/info.json
deleted file mode 100644
index 532bc13bee..0000000000
--- a/keyboards/cu24/info.json
+++ /dev/null
@@ -1,14 +0,0 @@
-{
-    "keyboard_name": "cu24", 
-    "url": "", 
-    "maintainer": "qmk", 
-    "layouts": {
-        "LAYOUT_grid": {
-            "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"x":3, "y":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"Enter", "x":3, "y":3}, {"label":"0", "x":0, "y":4}, {"x":1, "y":4}, {"label":".", "x":2, "y":4}, {"x":3, "y":4}, {"x":0, "y":5}, {"x":1, "y":5}, {"x":2, "y":5}, {"x":3, "y":5}]
-        },
-
-        "LAYOUT_numpad": {
-            "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"x":3, "y":2, "h":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"0", "x":0, "y":4}, {"x":1, "y":4}, {"label":".", "x":2, "y":4}, {"x":3, "y":4, "h":2}, {"x":0, "y":5, "w":2}, {"x":2, "y":5}]
-        }
-    }
-}
diff --git a/keyboards/cu24/keymaps/default/keymap.c b/keyboards/cu24/keymaps/default/keymap.c
deleted file mode 100644
index aa2d834dfa..0000000000
--- a/keyboards/cu24/keymaps/default/keymap.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = LAYOUT_grid( /* Base */
-  KC_MPLY,  KC_MUTE,  KC_VOLD,  KC_VOLU,
-  MO(1)  ,  KC_PSLS,  KC_PAST,  KC_PMNS,
-  KC_P7  ,  KC_P8  ,  KC_P9  ,  KC_PPLS,
-  KC_P4  ,  KC_P5  ,  KC_P6  ,  KC_PPLS,
-  KC_P1  ,  KC_P2  ,  KC_P3  ,  KC_PENT,
-  KC_P0  ,  KC_P0  ,  KC_PDOT,  KC_PENT
-),
-
-[1] = LAYOUT_grid( /* FN */
-  RGB_TOG,  RGB_MOD,  BL_STEP,  BL_BRTG,
-  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-  RGB_HUI,  RGB_SAI,  RGB_VAI,  KC_TRNS,
-  RGB_HUD,  RGB_SAD,  RGB_VAD,  KC_TRNS,
-  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-  KC_TRNS,  KC_TRNS,  RESET  ,  KC_TRNS
-),
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
diff --git a/keyboards/cu24/keymaps/default/readme.md b/keyboards/cu24/keymaps/default/readme.md
deleted file mode 100644
index 5528d6c0d8..0000000000
--- a/keyboards/cu24/keymaps/default/readme.md
+++ /dev/null
@@ -1,10 +0,0 @@
-https://imgur.com/a/vpHFj
-
-![CU24 Layout Image](https://imgur.com/X1c1qeY)
-
-# Default CU24 Layout
-
-This is the default layout that comes flashed on every CU24. It is like a normal numpad,
-with all the led customization on the Fn layer.
-
-See [All Layouts](https://imgur.com/trwO7dN) for all supported configurations!
\ No newline at end of file
diff --git a/keyboards/cu24/readme.md b/keyboards/cu24/readme.md
deleted file mode 100644
index ca3f3f5a04..0000000000
--- a/keyboards/cu24/readme.md
+++ /dev/null
@@ -1,15 +0,0 @@
-# CU24
-
-![CU24](https://geekhack.org/index.php?action=dlattach;topic=93289.0;attach=185492;image)
-
-A luxurious 24 key keypad with various layouts. Includes RGB underglow, backlight and an aluminium, brass and nylon case.
-
-Keyboard Maintainer: [Yiancar](https://github.com/yiancar)  
-Hardware Supported: PCB v1.0 (uses a 32u4) 
-Hardware Availability: [caps-unlocked.com](http://caps-unlocked.com/)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make CU24:default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
diff --git a/keyboards/cu24/rules.mk b/keyboards/cu24/rules.mk
deleted file mode 100644
index 87e6fffce0..0000000000
--- a/keyboards/cu24/rules.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no        # Console for debug
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-AUDIO_ENABLE = no           # Audio output
-RGBLIGHT_ENABLE = yes       # RGB drivers