diff options
| author | nuess0r <nussgipfel@brain4free.org> | 2023-05-27 15:12:36 +0200 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2023-05-27 23:12:36 +1000 |
| commit | f98f8eedf0dc6fe939162210ad44d5af8a0dfa08 (patch) | |
| tree | 171b1de71a2fec4e7c4f30b6c7e0275061a8d3f3 /keyboards/converter/modelm101/readme.md | |
| parent | e759230706373e9db8a0d6758f8c210288870d9f (diff) | |
Consolidate modelm v2 (#14996)
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Diffstat (limited to 'keyboards/converter/modelm101/readme.md')
| -rw-r--r-- | keyboards/converter/modelm101/readme.md | 42 |
1 files changed, 0 insertions, 42 deletions
diff --git a/keyboards/converter/modelm101/readme.md b/keyboards/converter/modelm101/readme.md deleted file mode 100644 index 5355c80071..0000000000 --- a/keyboards/converter/modelm101/readme.md +++ /dev/null @@ -1,42 +0,0 @@ -# modelm101 - - - -This is a configuration for the QMK firmware for reversible conversion of IBM's Model M keyboards (common 101-key ANSI and 102-key ISO models) from stock, power-hungry controller, to a modern one, running the USB bus. -Configuration is build for the Atmel AT90USB1286 controller, which you can easily use on the Teensy 2.0++ board (produced by PJRC). -Project is heavely based on 2 other projects: -1. Teensy 2.0++-based custom Model M controller running TMK firmware ('modelm" by [lmorchard](https://blog.lmorchard.com/2016/02/21/modelm-controller/)); - had a few issues. -2. Teensy 2.0++-based custom Model M 122-key controller running QMK firmware ("ibm122m" by [lukexorz](https://github.com/lukexorz)); - had wrong layout for 101/102-key boards and no status LED support. - -For this conversion you will need: -1. Teensy 2.0++ dev board itself (can be used a different dev board, but it will require some changes in configuration); -2. Ribbon connectors to connect the membrane to a dev board. Depending on your Model M variation, you will need 1 Trio-mate 16pin connector (6-520315-6 or 6-520415-6) and 1 Trio-mate 8pin connector (5-120628-8 or 5-520314-8), or 2 Trio-mate 16pin connectors; -3. Full-sized breadboard (without power rails; half-size should do, but full-sized one looks more native) or a PCB to wire everything up; -4. A bunch of jumper wires; -5. mini-USB male cable with any USB socket you want to use to connect Teensy inside the keyboard to your PC (I use short mini-USB male to mini-USB female cable); -6. (optional) Resistors for connecting status LEDs if your LED PCB doesn't have any; -7. (optional) Double-sided tape to fix USB socket on or inside the keyboard case. - -Pins of the Teensy board you should use by default: -``` -Columns: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 -Pins: C7 C6 C5 C4 C3 C2 C1 C0 E1 E0 D7 D6 D5 D4 D3 D2 --------------------------------------------------------- -Rows: 1 2 3 4 5 6 7 8 -Pins: F7 F6 F5 F4 F3 F2 F1 F0 --------------------------------------------------------- -Status LEDs: CapsLock +5V ScrollLock NumLock -Pins: B6 5V B5 B4 -``` - -Please note that some versions of Model M have LED connected with a ribbon cable, and not with separate wires. - -Keyboard Maintainer: [iw0rm3r](https://github.com/iw0rm3r) -Hardware Supported: Teensy 2.0++ board by PJRC -Hardware Availability: https://www.pjrc.com/store/teensypp.html - -Make example for this keyboard (after setting up your build environment): - - make converter/modelm101:default:teensy - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |