summaryrefslogtreecommitdiff
path: root/keyboards/converter/ibm_5291/rules.mk
diff options
context:
space:
mode:
authorlistofoptions <39714365+listofoptions@users.noreply.github.com>2018-11-26 12:53:49 -0500
committerDrashna Jaelre <drashna@live.com>2018-11-26 09:53:49 -0800
commit4ebd27002a344b017276dc70796435a8e718f46a (patch)
tree4414504e6cd7d6192f77b918f576abe2b91d4e41 /keyboards/converter/ibm_5291/rules.mk
parentf3ffd6ad50f0a4bf24f0a0453cc5502b4b88f390 (diff)
Keyboard: 5291 firmware to replace the existing soarers controller firmware (#4483)
* compiles but is not working * still testing 5291 * compiles but is not working * still testing 5291 * fixed a but in the layout (reversed key order in row) * compiles but is not working * still testing 5291 * fixed a but in the layout (reversed key order in row) * fixed some issues * doumentation needed * doumentation needed * documentation needed * documentation needed * Update readme.md documentation * Update readme.md i dislike markdown <_> * merge preperation
Diffstat (limited to 'keyboards/converter/ibm_5291/rules.mk')
-rw-r--r--keyboards/converter/ibm_5291/rules.mk72
1 files changed, 72 insertions, 0 deletions
diff --git a/keyboards/converter/ibm_5291/rules.mk b/keyboards/converter/ibm_5291/rules.mk
new file mode 100644
index 0000000000..ca0c850c0b
--- /dev/null
+++ b/keyboards/converter/ibm_5291/rules.mk
@@ -0,0 +1,72 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = halfkay
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = no
+SPLIT_KEYBOARD = no
+WAIT_FOR_USB = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+LAYOUTS_HAS_RGB = NO
+
+CUSTOM_MATRIX = yes
+SRC = matrix.c \ No newline at end of file