[Keyboard] Winkeyless Directory (#5163)

* introduce wkl directory and readme

* move bface into winkeyless directory and edit readme for new make instructions

* move bmini into the winkeyless directory and edit readme

* move bmini ex into winkeyless directory

* edit readme some more

* add newbs guide to readmes

* fix path to bface

* temporarily turn off community layout support until we refactor this taking out all the custom ps2avrgb stuff

16 files changed, 0 insertions, 1245 deletions

diff --git a/keyboards/bface/README.md b/keyboards/bface/README.md
deleted file mode 100644
index 0dac7caf30..0000000000
--- a/keyboards/bface/README.md
+++ /dev/null
@@ -1,44 +0,0 @@
-# B.face
-
-A 60% keyboard with RGB that runs ps2avrgb natively. Please note that the B.face and B.fake have different switch matrices. Firmware on one, will not work on the other. 
-
-Keyboard Maintainer: QMK Community  
-Hardware Supported: B.face PCB   
-Hardware Availability: [Winkeyless](https://winkeyless.kr/product/b-face-x2-pcb/)   
-
-Make example for this keyboard (after setting up your build environment):
-
-    make bface:default
-
-Flashing
-
-ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
-
-Windows: 
-1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
-2. Place your keyboard into reset. 
-3. Press the `Find Device` button and ensure that your keyboard is found.
-4. Press the `Open .hex File` button and locate the `.hex` file you created.
-5. Press the `Flash Device` button and wait for the process to complete. 
-
-macOS:
-1. Install homebrew by typing the following:   
-    ```
-    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
-    ```
-2. Install `crosspack-avr`.  
-    ```
-    brew cask install crosspack-avr
-    ```
-3. Install the following packages:
-    ```
-    brew install python
-    brew install pyusb
-    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-    ```
-
-4. Place your keyboard into reset. 
-5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
-
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
diff --git a/keyboards/bface/backlight_ps2avrGB.c b/keyboards/bface/backlight_ps2avrGB.c
deleted file mode 100644
index c0f6428407..0000000000
--- a/keyboards/bface/backlight_ps2avrGB.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/* Copyright 2017 Sebastian Kaim
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifdef BACKLIGHT_ENABLE
-
-#include "backlight_ps2avrGB.h"
-#define sbi(reg,bit)	reg |= (_BV(bit))
-#define cbi(reg,bit)	reg &= (~_BV(bit))
-#define PWM10	WGM10
-#define PWM11	WGM11
-#define COM1x1 COM1B1
-#define OCR1x  OCR1B
-
-void backlight_init_ports(void)
-{
-#if BACKLIGHT_ON_STATE == 0
-	backlight_off();
-#else
-	backlight_on();
-#endif
-
-	// setup pwm
-	// this bitmagic is sourced from the original firmware
-	/*TCCR1B = ((TCCR1B & ~0x07) | 0x03);
-	TCNT1H = 0;
-	TCNT1L = 0;
-	sbi(TIMSK, TOIE1);
-	OCR1BH = 0;
-	OCR1BL = 0;
-	cbi(TCCR1A,PWM11);
-	sbi(TCCR1A,PWM10);
-	sbi(TCCR1A,COM1B1);
-	cbi(TCCR1A,COM1B0);*/
-	ICR1 = 0xFFFF;
-
-    TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010;
-    TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
-
-	backlight_init();
-}
-
-void backlight_set(uint8_t level)
-{
-	if( level == 0 ) {
-		backlight_off();
-	}
-	else {
-		backlight_on();
-		/*uint8_t pwm = get_pwm_for_brightness(level);
-		set_backlight_pwm(pwm);
-		TCCR1A |= _BV(COM1x1);
-		OCR1x = (level >= 2) ? 0xFFFF : 0x00FF;*/
-	}
-}
-
-#define PWM_MAX 0xFF
-uint8_t get_pwm_for_brightness(uint8_t level)
-{
-	// we need to cast up here to allow multiplication with 0xFF. We could also use floats, but this is probably a lot faster.
-	uint16_t brightness = (uint16_t)level * (uint16_t)PWM_MAX / (uint16_t)BACKLIGHT_LEVELS;
-	return (uint8_t)brightness;
-}
-
-void backlight_on(void)
-{
-	//_SFR_IO8(0x12) |= _BV(0x4);
-	LED_PIN |= BACKLIGHT_PORT_NUM;
-}
-
-void backlight_off(void)
-{
-	//_SFR_IO8(0x12) &= ~_BV(0x4);
-	LED_PIN &= ~BACKLIGHT_PORT_NUM;
-}
-
-void set_backlight_pwm(uint8_t level) {
-	// this does not work (yet)
-	//OCR1B = level;
-}
-
-#endif // BACKLIGHT_ENABLE
diff --git a/keyboards/bface/backlight_ps2avrGB.h b/keyboards/bface/backlight_ps2avrGB.h
deleted file mode 100644
index d5ca903993..0000000000
--- a/keyboards/bface/backlight_ps2avrGB.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Copyright 2017 Sebastian Kaim
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-
-#if defined(__AVR__)
-#include <avr/pgmspace.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#endif
-#include <stddef.h>
-#include <stdlib.h>
-#include "backlight.h"
-
-#ifndef PS2AVRGB_BACKLIGHT_H
-#define PS2AVRGB_BACKLIGHT_H
-
-uint8_t get_pwm_for_brightness(uint8_t level);
-void set_backlight_pwm(uint8_t level);
-void backlight_on(void);
-void backlight_off(void);
-
-#endif
diff --git a/keyboards/bface/bface.c b/keyboards/bface/bface.c
deleted file mode 100644
index 8422a4a40b..0000000000
--- a/keyboards/bface/bface.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-Copyright 2018 Sebastian Kaim <sebb@sebb767.de>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "bface.h"
-#include "rgblight.h"
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
-
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-    rgblight_task();
-}
diff --git a/keyboards/bface/bface.h b/keyboards/bface/bface.h
deleted file mode 100644
index 62d62f6953..0000000000
--- a/keyboards/bface/bface.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-Copyright 2017 Sebastian Kaim <sebb@sebb767.de>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef KEYMAP_COMMON_H
-#define KEYMAP_COMMON_H
-
-#include "quantum_keycodes.h"
-#include "keycode.h"
-#include "action.h"
-
-#define LAYOUT_60_ansi( \
-  K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, \
-  K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, \
-  K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2,      KD2, \
-  K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, \
-  K00, K10, K20,           K56,                K57, KA0, KB0, KC0  \
-){ \
-  { K00,   K10,   K20,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KA0,   KB0,   KC0,   KC_NO, KC_NO }, \
-  { K01,   K11,   K21,   K31,   K41,   K51,   KC_NO, KC_NO, KC_NO, KC_NO, KA1,   KB1,   KC_NO, KC_NO, KC_NO }, \
-  { K02,   K12,   K22,   K32,   K42,   K52,   KC_NO, KC_NO, KC_NO, KC_NO, KA2,   KB2,   KC_NO, KD2,   KC_NO }, \
-  { K03,   K13,   K23,   K33,   K43,   K53,   KC_NO, KC_NO, KC_NO, KC_NO, KA3,   KB3,   KC3,   KD3,   KC_NO }, \
-  { K04,   K14,   K24,   K34,   K44,   K54,   KC_NO, KC_NO, KC_NO, KC_NO, KA4,   KB4,   KC4,   KC_NO, KE4   }, \
-  { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
-  { KC_NO, K16,   K26,   K36,   K46,   K56,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB6,   KC6,   KD6,   KE6   }, \
-  { KC_NO, K17,   K27,   K37,   K47,   K57,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB7,   KC7,   KD7,   KE7   } \
-}
-
-
-#endif
diff --git a/keyboards/bface/config.h b/keyboards/bface/config.h
deleted file mode 100644
index 11ac373c02..0000000000
--- a/keyboards/bface/config.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-Copyright 2017 Sebastian Kaim <sebastian.kaim@sebb767.de>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#define VENDOR_ID       0x20A0
-#define PRODUCT_ID      0x422D
-// You can edit those at usbconfig.h about line 250. These values will
-// unforunatly be ignored so far
-#define MANUFACTURER    winkeyless.kr
-#define PRODUCT         b.face
-
-/* matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 15
-
-#define RGBLED_NUM 16
-#define RGBLIGHT_ANIMATIONS
-
-#define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
-
-#ifdef BACKLIGHT_ENABLE
-	// the backlight PWM does not work (yet). Therefore, we only have two backlight levels (on/off)
-	#define BACKLIGHT_LEVELS 1
-	#define LED_PIN PORTD
-	#define BACKLIGHT_PORT_NUM (1 << 4)
-#endif
-
-#endif
diff --git a/keyboards/bface/i2c.c b/keyboards/bface/i2c.c
deleted file mode 100644
index c27f3e3d17..0000000000
--- a/keyboards/bface/i2c.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}
diff --git a/keyboards/bface/i2c.h b/keyboards/bface/i2c.h
deleted file mode 100644
index 27c9d3d050..0000000000
--- a/keyboards/bface/i2c.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif
diff --git a/keyboards/bface/info.json b/keyboards/bface/info.json
deleted file mode 100644
index f5ecf173d3..0000000000
--- a/keyboards/bface/info.json
+++ /dev/null
@@ -1,12 +0,0 @@
-{
-  "keyboard_name": "b.face",
-  "url": "",
-  "maintainer": "qmk",
-  "width": 15,
-  "height": 5,
-  "layouts": {
-      "LAYOUT_60_ansi": {
-          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
-      }
-  }
-}
diff --git a/keyboards/bface/keymaps/default/keymap.c b/keyboards/bface/keymaps/default/keymap.c
deleted file mode 100644
index a3e9bc9577..0000000000
--- a/keyboards/bface/keymaps/default/keymap.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
-Copyright 2017 Sebastian Kaim <sebastian.kaim@sebb767.de>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_60_ansi(
-        KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSPC,
-        KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,
-        KC_F1,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_ENT,
-        KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,        KC_RSFT,
-        KC_LCTL,KC_LALT,KC_LGUI,                KC_SPC,                         KC_RALT,KC_RGUI,MO(1), KC_RCTL
-    ),
-    [1] = LAYOUT_60_ansi(
-        KC_TRNS,KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_TRNS,
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,BL_INC, BL_DEC, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
-        KC_TRNS,KC_TRNS,RGB_MOD,KC_TRNS,BL_ON,  BL_OFF, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,
-        KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
-    ),
-    /* You can copy this layer as base for a new fn layer * /
-	[n] = LAYOUT_60_ansi(
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,
-        KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
-    ), // */
-};
diff --git a/keyboards/bface/keymaps/kpeatt/keymap.c b/keyboards/bface/keymaps/kpeatt/keymap.c
deleted file mode 100644
index 84de7872f4..0000000000
--- a/keyboards/bface/keymaps/kpeatt/keymap.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
-Copyright 2017 Kyle Peatt <kpeatt@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
-
-#define ______ KC_TRNS
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-    /* Qwerty
-    * ,-----------------------------------------------------------------------------------------.
-    * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |
-    * |-----------------------------------------------------------------------------------------+
-    * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
-    * |-----------------------------------------------------------------------------------------+
-    * | Caps/FN |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
-    * |-----------------------------------------------------------------------------------------+
-    * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |     RShift      |
-    * |-----------------------------------------------------------------------------------------+
-    * | Ctrl |  GUI  |  Alt  |              Space                |  Alt  |  GUI  |  Ctrl |  Fn  |
-    * `-----------------------------------------------------------------------------------------'
-    */
-
-    [0] = LAYOUT_60_ansi(
-        KC_GESC, KC_1,  KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL, KC_BSPC,
-        KC_TAB,  KC_Q,  KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC,KC_BSLS,
-        LT(1, KC_CAPS), KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_ENT,
-        KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
-        KC_LCTL,KC_LGUI,KC_LALT,                KC_SPC,                          KC_RALT,KC_RGUI, KC_RCTL, MO(1)
-    ),
-
-    /* FN Layer
-    * ,-----------------------------------------------------------------------------------------.
-    * |  `~ | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10  | F11  | F12  |        |
-    * |-----------------------------------------------------------------------------------------+
-    * |        |     |  Up |     |     |     |     |     |     |     |RGBMOD| Val+| Val- |RBGTOG|
-    * |-----------------------------------------------------------------------------------------+
-    * |         | Left| Down|Right|     |     |     |     | Sat+| Sat-| Hue+| Hue-|             |
-    * |-----------------------------------------------------------------------------------------+
-    * |           |     |     |     |     |     |     |     |     |     |     |     |     |     |
-    * |-----------------------------------------------------------------------------------------+
-    * |      |       |       |                                   |     |      |     |     |     |
-    * `-----------------------------------------------------------------------------------------'
-    */
-
-    [1] = LAYOUT_60_ansi(
-        KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, ______,
-        ______,______,KC_UP,______,______,______,______,______,______,______,RGB_MOD,RGB_VAI,RGB_VAD,RGB_TOG,
-        ______,KC_LEFT,KC_DOWN,KC_RGHT,______, ______, ______,______,RGB_SAI,RGB_SAD,RGB_HUI,RGB_HUD,______,
-        ______,______,______,______,______, ______, ______,______,______,______,______,        ______,
-        ______,______,______,                ______,                        ______,______,______,______
-    ),
-    /* You can copy this layer as base for a new fn layer * /
-	[n] = LAYOUT_60_ansi(
-        ______,______,______,______,______,______,______,______,______,______,______,______,______,______,
-        ______,______,______,______,______,______,______,______,______,______,______,______,______,______,
-        ______,______,______,______,______,______,______,______,______,______,______,______,______,
-        ______,______,______,______,______,______,______,______,______,______,______,        ______,
-        ______,______,______,                ______,                        ______,______,______,______
-    ), // */
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-	[0]  = ACTION_LAYER_MOMENTARY(1),
-};
diff --git a/keyboards/bface/keymaps/kpeatt/readme.md b/keyboards/bface/keymaps/kpeatt/readme.md
deleted file mode 100644
index a7eef1e5fc..0000000000
--- a/keyboards/bface/keymaps/kpeatt/readme.md
+++ /dev/null
@@ -1,10 +0,0 @@
-kpeatt's bface layout
-======================
-
-## Keyboard Notes
-- This is for a clone bface PCB that is no longer for sale as far as I can tell. [Used to be sold on KBDFans](https://www.aliexpress.com/item/bface-60-RGB-underground-copy-pcb-from-china-gh60-pcb-Customize-keyboard-PCB/32731084597.html).
-- To put in reset mode hold `left ctrl` while inserting the USB cable
-- Use flashing instructions in the main `bface` directory
-
-### Build
-To build this keymap, run `make bface:kpeatt` from the qmk_firmware directory.
diff --git a/keyboards/bface/matrix.c b/keyboards/bface/matrix.c
deleted file mode 100644
index b3761a63ca..0000000000
--- a/keyboards/bface/matrix.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <util/delay.h>
-
-#include "matrix.h"
-
-#ifndef DEBOUNCE
-#   define DEBOUNCE	5
-#endif
-
-static uint8_t debouncing = DEBOUNCE;
-
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-void matrix_init(void) {
-    // all outputs for rows high
-    DDRB = 0xFF;
-    PORTB = 0xFF;
-    // all inputs for columns
-    DDRA = 0x00;
-    DDRC &= ~(0x111111<<2);
-    DDRD &= ~(1<<PIND7);
-    // all columns are pulled-up
-    PORTA = 0xFF;
-    PORTC |= (0b111111<<2);
-    PORTD |= (1<<PIND7);
-
-    // initialize matrix state: all keys off
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        matrix[row] = 0x00;
-        matrix_debouncing[row] = 0x00;
-    }
-
-	// activate backlight
-	//PORTD |= (1 << 4);
-	//_SFR_IO8(0x09) |= (1 << 4); //_BV(0x94 & 0xF);
-	//
-	// this is the code that *should* be executed in quantum.c
-	_SFR_IO8(0x12) |= _BV(0x4);
-}
-
-void matrix_set_row_status(uint8_t row) {
-    DDRB = (1 << row);
-    PORTB = ~(1 << row);
-}
-
-uint8_t bit_reverse(uint8_t x) {
-    x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
-    x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
-    x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
-    return x;
-}
-
-uint8_t matrix_scan(void) {
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        matrix_set_row_status(row);
-        _delay_us(5);
-
-        matrix_row_t cols = (
-            // cols 0..7, PORTA 0 -> 7
-            (~PINA) & 0xFF
-        ) | (
-            // cols 8..13, PORTC 7 -> 0
-            bit_reverse((~PINC) & 0xFF) << 8
-        ) | (
-            // col 14, PORTD 7
-            ((~PIND) & (1 << PIND7)) << 7
-        );
-
-        if (matrix_debouncing[row] != cols) {
-            matrix_debouncing[row] = cols;
-            debouncing = DEBOUNCE;
-        }
-    }
-
-    if (debouncing) {
-        if (--debouncing) {
-            _delay_ms(1);
-        } else {
-            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-                matrix[i] = matrix_debouncing[i];
-            }
-        }
-    }
-
-    matrix_scan_user();
-
-    return 1;
-}
-
-inline matrix_row_t matrix_get_row(uint8_t row) {
-    return matrix[row];
-}
-
-void matrix_print(void) {
-}
diff --git a/keyboards/bface/program b/keyboards/bface/program
deleted file mode 100755
index 298e645477..0000000000
--- a/keyboards/bface/program
+++ /dev/null
@@ -1,105 +0,0 @@
-#!/usr/bin/env python
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>, Sebastian Kaim <sebb@sebb767.de>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-from __future__ import print_function
-
-import os
-import sys
-import time
-import usb
-
-
-def checkForKeyboardInNormalMode():
-    """Returns a device if a ps2avrGB device in normal made (that is in keyboard mode) or None if it is not found."""
-    return usb.core.find(idVendor=0x20A0, idProduct=0x422D)
-
-def checkForKeyboardInBootloaderMode():
-    """Returns True if a ps2avrGB device in bootloader (flashable) mode is found and False otherwise."""
-    return (usb.core.find(idVendor=0x16c0, idProduct=0x05df) is not None)
-
-def flashKeyboard(firmware_file):
-    """Calls bootloadHID to flash the given file to the device."""
-    print('Flashing firmware to device ...')
-    if os.system('bootloadHID -r "%s"' % firmware_file) == 0:
-        print('\nDone!')
-    else:
-        print('\nbootloadHID returned an error.')
-
-def printDeviceInfo(dev):
-    """Prints all infos for a given USB device"""
-    print('Device Information:')
-    print('  idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor))
-    print('  idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct))
-    print('Manufacturer: %s' % (dev.iManufacturer))
-    print('Serial: %s' % (dev.iSerialNumber))
-    print('Product: %s' % (dev.iProduct), end='\n\n')
-
-def sendDeviceToBootloaderMode(dev):
-    """Tries to send a given ps2avrGB keyboard to bootloader mode to allow flashing."""
-    try:
-        dev.set_configuration()
-
-        request_type = usb.util.build_request_type(
-                usb.util.CTRL_OUT,
-                usb.util.CTRL_TYPE_CLASS,
-                usb.util.CTRL_RECIPIENT_DEVICE)
-
-        USBRQ_HID_SET_REPORT = 0x09
-        HID_REPORT_OPTION = 0x0301
-
-        dev.ctrl_transfer(request_type, USBRQ_HID_SET_REPORT, HID_REPORT_OPTION, 0, [0, 0, 0xFF] + [0] * 5)
-    except usb.core.USBError:
-        # for some reason I keep getting USBError, but it works!
-        pass
-
-
-if len(sys.argv) < 2:
-    print('Usage: %s <firmware.hex>' % sys.argv[0])
-    sys.exit(1)
-
-kb = checkForKeyboardInNormalMode()
-
-if kb is not None:
-    print('Found a keyboad in normal mode. Attempting to send it to bootloader mode ...', end='')
-    sendDeviceToBootloaderMode(kb)
-    print(' done.')
-    print("Hint: If your keyboard can't be set to bootloader mode automatically, plug it in while pressing the bootloader key to do so manually.")
-    print("      You can find more infos about this here: https://github.com/qmk/qmk_firmware/tree/master/keyboards/ps2avrGB#setting-the-board-to-bootloader-mode")
-
-attempts = 12  # 60 seconds
-found = False
-for attempt in range(1, attempts + 1):
-    print("Searching for keyboard in bootloader mode (%i/%i) ... " % (attempt, attempts), end='')
-
-    if checkForKeyboardInBootloaderMode():
-        print('Found', end='\n\n')
-        flashKeyboard(sys.argv[1])
-        found = True
-        break
-    else:
-        print('Nothing.', end='')
-
-        if attempt != attempts:  # no need to wait on the last attempt
-            print(' Sleeping 5 seconds.', end='')
-            time.sleep(5)
-
-        # print a newline
-        print()
-
-if not found:
-    print("Couldn't find a flashable keyboard. Aborting.")
-    sys.exit(2)
-
diff --git a/keyboards/bface/rules.mk b/keyboards/bface/rules.mk
deleted file mode 100644
index 95b6c8a97a..0000000000
--- a/keyboards/bface/rules.mk
+++ /dev/null
@@ -1,49 +0,0 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# MCU name
-MCU = atmega32a
-PROTOCOL = VUSB
-
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# build options
-BOOTMAGIC_ENABLE = yes
-MOUSEKEY_ENABLE = yes
-EXTRAKEY_ENABLE = yes
-CONSOLE_ENABLE = no
-COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = yes
-BACKLIGHT_CUSTOM_DRIVER = yes
-BACKLIGHT_BREATHING = no
-RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
-
-OPT_DEFS = -DDEBUG_LEVEL=0
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
-
-# custom matrix setup
-CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c backlight_ps2avrGB.c
-
-# programming options
-PROGRAM_CMD = ./keyboards/bface/program .build/$(TARGET).hex
-
-LAYOUTS = 60_ansi
diff --git a/keyboards/bface/usbconfig.h b/keyboards/bface/usbconfig.h
deleted file mode 100644
index f87922615b..0000000000
--- a/keyboards/bface/usbconfig.h
+++ /dev/null
@@ -1,396 +0,0 @@
-/* Name: usbconfig.h
- * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
- * Author: Christian Starkjohann
- * Creation Date: 2005-04-01
- * Tabsize: 4
- * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
- * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
- * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
- */
-
-#ifndef __usbconfig_h_included__
-#define __usbconfig_h_included__
-
-#include "config.h"
-
-/*
-General Description:
-This file is an example configuration (with inline documentation) for the USB
-driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
-also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
-wire the lines to any other port, as long as D+ is also wired to INT0 (or any
-other hardware interrupt, as long as it is the highest level interrupt, see
-section at the end of this file).
-*/
-
-/* ---------------------------- Hardware Config ---------------------------- */
-
-#define USB_CFG_IOPORTNAME      D
-/* This is the port where the USB bus is connected. When you configure it to
- * "B", the registers PORTB, PINB and DDRB will be used.
- */
-#define USB_CFG_DMINUS_BIT      3
-/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
- * This may be any bit in the port.
- */
-#define USB_CFG_DPLUS_BIT       2
-/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
- * This may be any bit in the port. Please note that D+ must also be connected
- * to interrupt pin INT0! [You can also use other interrupts, see section
- * "Optional MCU Description" below, or you can connect D- to the interrupt, as
- * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
- * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
- * markers every millisecond.]
- */
-#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
-/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
- * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
- * require no crystal, they tolerate +/- 1% deviation from the nominal
- * frequency. All other rates require a precision of 2000 ppm and thus a
- * crystal!
- * Since F_CPU should be defined to your actual clock rate anyway, you should
- * not need to modify this setting.
- */
-#define USB_CFG_CHECK_CRC       0
-/* Define this to 1 if you want that the driver checks integrity of incoming
- * data packets (CRC checks). CRC checks cost quite a bit of code size and are
- * currently only available for 18 MHz crystal clock. You must choose
- * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
- */
-
-/* ----------------------- Optional Hardware Config ------------------------ */
-
-/* #define USB_CFG_PULLUP_IOPORTNAME   D */
-/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
- * V+, you can connect and disconnect the device from firmware by calling
- * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
- * This constant defines the port on which the pullup resistor is connected.
- */
-/* #define USB_CFG_PULLUP_BIT          4 */
-/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
- * above) where the 1.5k pullup resistor is connected. See description
- * above for details.
- */
-
-/* --------------------------- Functional Range ---------------------------- */
-
-#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
-/* Define this to 1 if you want to compile a version with two endpoints: The
- * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
- * number).
- */
-#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
-/* Define this to 1 if you want to compile a version with three endpoints: The
- * default control endpoint 0, an interrupt-in endpoint 3 (or the number
- * configured below) and a catch-all default interrupt-in endpoint as above.
- * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
- */
-#define USB_CFG_EP3_NUMBER              3
-/* If the so-called endpoint 3 is used, it can now be configured to any other
- * endpoint number (except 0) with this macro. Default if undefined is 3.
- */
-/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
-/* The above macro defines the startup condition for data toggling on the
- * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
- * Since the token is toggled BEFORE sending any data, the first packet is
- * sent with the oposite value of this configuration!
- */
-#define USB_CFG_IMPLEMENT_HALT          0
-/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
- * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
- * it is required by the standard. We have made it a config option because it
- * bloats the code considerably.
- */
-#define USB_CFG_SUPPRESS_INTR_CODE      0
-/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
- * want to send any data over them. If this macro is defined to 1, functions
- * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
- * you need the interrupt-in endpoints in order to comply to an interface
- * (e.g. HID), but never want to send any data. This option saves a couple
- * of bytes in flash memory and the transmit buffers in RAM.
- */
-#define USB_CFG_INTR_POLL_INTERVAL      1
-/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
- * interval. The value is in milliseconds and must not be less than 10 ms for
- * low speed devices.
- */
-#define USB_CFG_IS_SELF_POWERED         0
-/* Define this to 1 if the device has its own power supply. Set it to 0 if the
- * device is powered from the USB bus.
- */
-#define USB_CFG_MAX_BUS_POWER           500
-/* Set this variable to the maximum USB bus power consumption of your device.
- * The value is in milliamperes. [It will be divided by two since USB
- * communicates power requirements in units of 2 mA.]
- */
-#define USB_CFG_IMPLEMENT_FN_WRITE      1
-/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
- * transfers. Set it to 0 if you don't need it and want to save a couple of
- * bytes.
- */
-#define USB_CFG_IMPLEMENT_FN_READ       0
-/* Set this to 1 if you need to send control replies which are generated
- * "on the fly" when usbFunctionRead() is called. If you only want to send
- * data from a static buffer, set it to 0 and return the data from
- * usbFunctionSetup(). This saves a couple of bytes.
- */
-#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
-/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
- * You must implement the function usbFunctionWriteOut() which receives all
- * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
- * can be found in 'usbRxToken'.
- */
-#define USB_CFG_HAVE_FLOWCONTROL        0
-/* Define this to 1 if you want flowcontrol over USB data. See the definition
- * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
- * usbdrv.h.
- */
-#define USB_CFG_DRIVER_FLASH_PAGE       0
-/* If the device has more than 64 kBytes of flash, define this to the 64 k page
- * where the driver's constants (descriptors) are located. Or in other words:
- * Define this to 1 for boot loaders on the ATMega128.
- */
-#define USB_CFG_LONG_TRANSFERS          0
-/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
- * in a single control-in or control-out transfer. Note that the capability
- * for long transfers increases the driver size.
- */
-/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
-/* This macro is a hook if you want to do unconventional things. If it is
- * defined, it's inserted at the beginning of received message processing.
- * If you eat the received message and don't want default processing to
- * proceed, do a return after doing your things. One possible application
- * (besides debugging) is to flash a status LED on each packet.
- */
-/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
-/* This macro is a hook if you need to know when an USB RESET occurs. It has
- * one parameter which distinguishes between the start of RESET state and its
- * end.
- */
-/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
-/* This macro (if defined) is executed when a USB SET_ADDRESS request was
- * received.
- */
-#define USB_COUNT_SOF                   1
-/* define this macro to 1 if you need the global variable "usbSofCount" which
- * counts SOF packets. This feature requires that the hardware interrupt is
- * connected to D- instead of D+.
- */
-/* #ifdef __ASSEMBLER__
- * macro myAssemblerMacro
- *     in      YL, TCNT0
- *     sts     timer0Snapshot, YL
- *     endm
- * #endif
- * #define USB_SOF_HOOK                    myAssemblerMacro
- * This macro (if defined) is executed in the assembler module when a
- * Start Of Frame condition is detected. It is recommended to define it to
- * the name of an assembler macro which is defined here as well so that more
- * than one assembler instruction can be used. The macro may use the register
- * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
- * immediately after an SOF pulse may be lost and must be retried by the host.
- * What can you do with this hook? Since the SOF signal occurs exactly every
- * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
- * designs running on the internal RC oscillator.
- * Please note that Start Of Frame detection works only if D- is wired to the
- * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
- */
-#define USB_CFG_CHECK_DATA_TOGGLING     0
-/* define this macro to 1 if you want to filter out duplicate data packets
- * sent by the host. Duplicates occur only as a consequence of communication
- * errors, when the host does not receive an ACK. Please note that you need to
- * implement the filtering yourself in usbFunctionWriteOut() and
- * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
- * for each control- and out-endpoint to check for duplicate packets.
- */
-#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
-/* define this macro to 1 if you want the function usbMeasureFrameLength()
- * compiled in. This function can be used to calibrate the AVR's RC oscillator.
- */
-#define USB_USE_FAST_CRC                0
-/* The assembler module has two implementations for the CRC algorithm. One is
- * faster, the other is smaller. This CRC routine is only used for transmitted
- * messages where timing is not critical. The faster routine needs 31 cycles
- * per byte while the smaller one needs 61 to 69 cycles. The faster routine
- * may be worth the 32 bytes bigger code size if you transmit lots of data and
- * run the AVR close to its limit.
- */
-
-/* -------------------------- Device Description --------------------------- */
-
-#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
-/* USB vendor ID for the device, low byte first. If you have registered your
- * own Vendor ID, define it here. Otherwise you may use one of obdev's free
- * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
- * *** IMPORTANT NOTE ***
- * This template uses obdev's shared VID/PID pair for Vendor Class devices
- * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
- * the implications!
- */
-#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
-/* This is the ID of the product, low byte first. It is interpreted in the
- * scope of the vendor ID. If you have registered your own VID with usb.org
- * or if you have licensed a PID from somebody else, define it here. Otherwise
- * you may use one of obdev's free shared VID/PID pairs. See the file
- * USB-IDs-for-free.txt for details!
- * *** IMPORTANT NOTE ***
- * This template uses obdev's shared VID/PID pair for Vendor Class devices
- * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
- * the implications!
- */
-#define USB_CFG_DEVICE_VERSION  0x00, 0x02
-/* Version number of the device: Minor number first, then major number.
- */
-#define USB_CFG_VENDOR_NAME     'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME     'b', '.', 'f', 'a', 'c', 'e'
-#define USB_CFG_DEVICE_NAME_LEN 6
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
-#define USB_CFG_DEVICE_CLASS        0
-#define USB_CFG_DEVICE_SUBCLASS     0
-/* See USB specification if you want to conform to an existing device class.
- * Class 0xff is "vendor specific".
- */
-#define USB_CFG_INTERFACE_CLASS     3   /* HID */
-#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
-#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
-/* See USB specification if you want to conform to an existing device class or
- * protocol. The following classes must be set at interface level:
- * HID class is 3, no subclass and protocol required (but may be useful!)
- * CDC class is 2, use subclass 2 and protocol 1 for ACM
- */
-#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
-/* Define this to the length of the HID report descriptor, if you implement
- * an HID device. Otherwise don't define it or define it to 0.
- * If you use this define, you must add a PROGMEM character array named
- * "usbHidReportDescriptor" to your code which contains the report descriptor.
- * Don't forget to keep the array and this define in sync!
- */
-
-/* #define USB_PUBLIC static */
-/* Use the define above if you #include usbdrv.c instead of linking against it.
- * This technique saves a couple of bytes in flash memory.
- */
-
-/* ------------------- Fine Control over USB Descriptors ------------------- */
-/* If you don't want to use the driver's default USB descriptors, you can
- * provide our own. These can be provided as (1) fixed length static data in
- * flash memory, (2) fixed length static data in RAM or (3) dynamically at
- * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
- * information about this function.
- * Descriptor handling is configured through the descriptor's properties. If
- * no properties are defined or if they are 0, the default descriptor is used.
- * Possible properties are:
- *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
- *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
- *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
- *     you want RAM pointers.
- *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
- *     in static memory is in RAM, not in flash memory.
- *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
- *     the driver must know the descriptor's length. The descriptor itself is
- *     found at the address of a well known identifier (see below).
- * List of static descriptor names (must be declared PROGMEM if in flash):
- *   char usbDescriptorDevice[];
- *   char usbDescriptorConfiguration[];
- *   char usbDescriptorHidReport[];
- *   char usbDescriptorString0[];
- *   int usbDescriptorStringVendor[];
- *   int usbDescriptorStringDevice[];
- *   int usbDescriptorStringSerialNumber[];
- * Other descriptors can't be provided statically, they must be provided
- * dynamically at runtime.
- *
- * Descriptor properties are or-ed or added together, e.g.:
- * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
- *
- * The following descriptors are defined:
- *   USB_CFG_DESCR_PROPS_DEVICE
- *   USB_CFG_DESCR_PROPS_CONFIGURATION
- *   USB_CFG_DESCR_PROPS_STRINGS
- *   USB_CFG_DESCR_PROPS_STRING_0
- *   USB_CFG_DESCR_PROPS_STRING_VENDOR
- *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
- *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
- *   USB_CFG_DESCR_PROPS_HID
- *   USB_CFG_DESCR_PROPS_HID_REPORT
- *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
- *
- * Note about string descriptors: String descriptors are not just strings, they
- * are Unicode strings prefixed with a 2 byte header. Example:
- * int  serialNumberDescriptor[] = {
- *     USB_STRING_DESCRIPTOR_HEADER(6),
- *     'S', 'e', 'r', 'i', 'a', 'l'
- * };
- */
-
-#define USB_CFG_DESCR_PROPS_DEVICE                  0
-#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
-//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
-#define USB_CFG_DESCR_PROPS_STRINGS                 0
-#define USB_CFG_DESCR_PROPS_STRING_0                0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
-#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
-//#define USB_CFG_DESCR_PROPS_HID                     0
-#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
-//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
-#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
-
-#define usbMsgPtr_t unsigned short
-/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
- * a scalar type here because gcc generates slightly shorter code for scalar
- * arithmetics than for pointer arithmetics. Remove this define for backward
- * type compatibility or define it to an 8 bit type if you use data in RAM only
- * and all RAM is below 256 bytes (tiny memory model in IAR CC).
- */
-
-/* ----------------------- Optional MCU Description ------------------------ */
-
-/* The following configurations have working defaults in usbdrv.h. You
- * usually don't need to set them explicitly. Only if you want to run
- * the driver on a device which is not yet supported or with a compiler
- * which is not fully supported (such as IAR C) or if you use a differnt
- * interrupt than INT0, you may have to define some of these.
- */
-/* #define USB_INTR_CFG            MCUCR */
-/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
-/* #define USB_INTR_CFG_CLR        0 */
-/* #define USB_INTR_ENABLE         GIMSK */
-/* #define USB_INTR_ENABLE_BIT     INT0 */
-/* #define USB_INTR_PENDING        GIFR */
-/* #define USB_INTR_PENDING_BIT    INTF0 */
-/* #define USB_INTR_VECTOR         INT0_vect */
-
-/* Set INT1 for D- falling edge to count SOF */
-/* #define USB_INTR_CFG            EICRA */
-#define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
-/* #define USB_INTR_CFG_CLR        0 */
-/* #define USB_INTR_ENABLE         EIMSK */
-#define USB_INTR_ENABLE_BIT     INT1
-/* #define USB_INTR_PENDING        EIFR */
-#define USB_INTR_PENDING_BIT    INTF1
-#define USB_INTR_VECTOR         INT1_vect
-
-#endif /* __usbconfig_h_included__ */