Remove userspace keymaps (#22544)

1 files changed, 0 insertions, 109 deletions

diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h
deleted file mode 100644
index 6d24808af2..0000000000
--- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
-
-Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#ifdef KEYBOARD_bastardkb_charybdis_3x5_blackpill
-
-#    undef MATRIX_ROW_PINS
-#    define MATRIX_ROW_PINS \
-        { B12, B13, B14, B15 }
-#    undef MATRIX_COL_PINS
-#    define MATRIX_COL_PINS \
-        { A15, B3, B4, B5, B6 }
-
-#    undef MATRIX_ROW_PINS_RIGHT
-#    define MATRIX_ROW_PINS_RIGHT \
-        { B12, B13, B14, B15 }
-#    undef MATRIX_COL_PINS_RIGHT
-#    define MATRIX_COL_PINS_RIGHT \
-        { A15, B3, B4, B5, B6 }
-
-#    define USB_VBUS_PIN B10
-#    undef SPLIT_HAND_PIN
-#    define SPLIT_HAND_PIN C14 // high = left, low = right
-
-// WS2812 RGB LED strip input and number of LEDs
-#    undef WS2812_DI_PIN
-#    define WS2812_DI_PIN A1
-#    undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
-#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
-#    define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
-#    define WS2812_PWM_CHANNEL 2    // default: 2
-#    define WS2812_PWM_PAL_MODE 1   // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
-#    define WS2812_EXTERNAL_PULLUP
-//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
-#    undef WS2812_DMA_STREAM
-#    define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-#    define WS2812_DMA_CHANNEL 3                 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-#    define WS2812_PWM_TARGET_PERIOD 800000
-
-#    define DEBUG_LED_PIN C13
-
-/* Audio config */
-#    define AUDIO_PIN B1
-#    define AUDIO_PWM_DRIVER PWMD3
-#    define AUDIO_PWM_CHANNEL 4
-#    define AUDIO_PWM_PAL_MODE 2
-
-/* serial.c configuration for split keyboard */
-#    undef SOFT_SERIAL_PIN
-#    define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
-#    undef SERIAL_USART_TX_PIN
-#    define SERIAL_USART_TX_PIN A2
-#    undef SERIAL_USART_RX_PIN
-#    define SERIAL_USART_RX_PIN A3
-#    define SERIAL_USART_DRIVER SD2
-#    define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
-#    define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
-#    define SERIAL_USART_TIMEOUT 100   // USART driver timeout. default 100
-#    define SERIAL_USART_SPEED 921600
-// #define SERIAL_USART_PIN_SWAP // swap RX and TX pins on master
-// To use the highest possible baudrate (3.75Mbit/s) uncomment the following
-// line, this can result in dropped communications so lower the speed if there
-// are many timeouts.
-// #define SERIAL_USART_SPEED (STM32_PCLK2 >> 4)
-
-#    define CRC8_USE_TABLE
-#    define CRC8_OPTIMIZE_SPEED
-
-/* spi config for eeprom and pmw3360 sensor */
-#    define SPI_DRIVER SPID1
-#    define SPI_SCK_PIN A5
-#    define SPI_SCK_PAL_MODE 5
-#    define SPI_MOSI_PIN A7
-#    define SPI_MOSI_PAL_MODE 5
-#    define SPI_MISO_PIN A6
-#    define SPI_MISO_PAL_MODE 5
-
-/* eeprom config */
-#    define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
-#    define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64
-// #define EXTERNAL_EEPROM_BYTE_COUNT           8196
-// #define EXTERNAL_EEPROM_PAGE_SIZE            32
-// #define EXTERNAL_EEPROM_ADDRESS_SIZE         2
-
-/* pmw3360 config  */
-#    undef PMW33XX_CS_PIN
-#    define PMW33XX_CS_PIN B0
-#endif
-
-#define CHARYBDIS_MINIMUM_DEFAULT_DPI 1200
-#define CHARYBDIS_DEFAULT_DPI_CONFIG_STEP 400
-#define CHARYBDIS_MINIMUM_SNIPING_DPI 200
-#define CHARYBDIS_SNIPING_DPI_CONFIG_STEP 100