Remove obvious user keymaps, `keyboards/{b,c}*` edition. (#22693)

1 files changed, 0 insertions, 155 deletions

diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/config.h b/keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/config.h
deleted file mode 100644
index d7b6d01bce..0000000000
--- a/keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/config.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/**
- * Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com>
- * Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#ifdef VIA_ENABLE
-/* Via configuration. */
-#    define DYNAMIC_KEYMAP_LAYER_COUNT 8
-#endif // VIA_ENABLE
-
-#ifndef __arm__
-/* Disable unused features. */
-#    define NO_ACTION_ONESHOT
-#endif // __arm__
-
-/**
- * Configure the global tapping term (default: 200ms).
- * If you have a lot of accidental mod activations, crank up the tapping term.
- *
- * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term
- */
-#ifndef TAPPING_TERM
-#    define TAPPING_TERM 160
-#endif // TAPPING_TERM
-
-/**
- * Enable rapid switch from tap to hold.  Disable auto-repeat when pressing key
- * twice, except for one-shot keys.
- *
- * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-force-hold
- */
-#define QUICK_TAP_TERM 0
-
-/*
- * Tap-or-Hold decision modes.
- *
- * Note that the following flags behave differently when combined (ie. when 2 or
- * more are enabled).
- *
- * See bit.ly/tap-or-hold for a visual explanation of the following tap-or-hold
- * decision modes.
- */
-
-/**
- * Faster tap-hold trigger.
- *
- * Without `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
- *   Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ ae
- * With `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
- *   Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ Mod+e
- *
- * See docs.qmk.fm/using-qmk/software-features/tap_hold#permissive-hold
- */
-#define PERMISSIVE_HOLD
-
-/** Charybdis-specific features. */
-
-#ifdef POINTING_DEVICE_ENABLE
-// Automatically enable the pointer layer when moving the trackball.  See also:
-// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS`
-// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD`
-// #define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
-
-// Flip horizontal direction for drag-scroll.
-#    define CHARYBDIS_DRAGSCROLL_REVERSE_X
-// #define CHARYBDIS_DRAGSCROLL_REVERSE_Y
-#endif // POINTING_DEVICE_ENABLE
-
-/** RGB Matrix. */
-
-#ifdef RGB_MATRIX_ENABLE
-#    ifdef __arm__
-// Enable all animations on ARM boards since they have plenty of memory
-// available for it.
-#        define ENABLE_RGB_MATRIX_ALPHAS_MODS
-#        define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-#        define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
-#        define ENABLE_RGB_MATRIX_BREATHING
-#        define ENABLE_RGB_MATRIX_BAND_SAT
-#        define ENABLE_RGB_MATRIX_BAND_VAL
-#        define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
-#        define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
-#        define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
-#        define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
-#        define ENABLE_RGB_MATRIX_CYCLE_ALL
-#        define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#        define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
-#        define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-#        define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
-#        define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
-#        define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
-#        define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
-#        define ENABLE_RGB_MATRIX_DUAL_BEACON
-#        define ENABLE_RGB_MATRIX_RAINBOW_BEACON
-#        define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
-#        define ENABLE_RGB_MATRIX_RAINDROPS
-#        define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
-#        define ENABLE_RGB_MATRIX_HUE_BREATHING
-#        define ENABLE_RGB_MATRIX_HUE_PENDULUM
-#        define ENABLE_RGB_MATRIX_HUE_WAVE
-#        define ENABLE_RGB_MATRIX_TYPING_HEATMAP
-#        define ENABLE_RGB_MATRIX_DIGITAL_RAIN
-#        define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-#        define ENABLE_RGB_MATRIX_SOLID_REACTIVE
-#        define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
-#        define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-#        define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
-#        define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-#        define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
-#        define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
-#        define ENABLE_RGB_MATRIX_SPLASH
-#        define ENABLE_RGB_MATRIX_MULTISPLASH
-#        define ENABLE_RGB_MATRIX_SOLID_SPLASH
-#        define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
-#    else
-// Disable control of RGB matrix by keycodes (must use firmware implementation
-// to control the feature).
-#        define RGB_MATRIX_DISABLE_KEYCODES
-#    endif
-
-// Limit maximum brightness to keep power consumption reasonable, and avoid
-// disconnects.
-#    undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
-#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64
-
-// Rainbow swirl as startup mode.
-#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
-
-// Slow swirl at startup.
-#    undef RGB_MATRIX_DEFAULT_SPD
-#    define RGB_MATRIX_DEFAULT_SPD 32
-
-// Startup values.
-#    undef RGB_MATRIX_DEFAULT_HUE
-#    define RGB_MATRIX_DEFAULT_HUE 0
-#    undef RGB_MATRIX_DEFAULT_SAT
-#    define RGB_MATRIX_DEFAULT_SAT 255
-#    undef RGB_MATRIX_DEFAULT_VAL
-#    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
-#endif // RGB_MATRIX_ENABLE