Add support for up to 4 IS31FL3733 drivers (#12342)

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>

2 files changed, 108 insertions, 19 deletions

diff --git a/docs/feature_led_matrix.md b/docs/feature_led_matrix.md
index 7834b940d5..e56caabfe7 100644
--- a/docs/feature_led_matrix.md
+++ b/docs/feature_led_matrix.md
@@ -15,7 +15,20 @@ LED_MATRIX_ENABLE = yes
 LED_MATRIX_DRIVER = IS31FL3731
 ```
 
-Configure the hardware via your `config.h`:
+You can use between 1 and 4 IS31FL3731 IC's. Do not specify `LED_DRIVER_ADDR_<N>` defines for IC's that are not present on your keyboard. You can define the following items in `config.h`:
+
+| Variable | Description | Default |
+|----------|-------------|---------|
+| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
+| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `LED_DRIVER_COUNT` | (Required) How many LED driver IC's are present | |
+| `DRIVER_LED_TOTAL` | (Required) How many LED lights are present across all drivers | |
+| `LED_DRIVER_ADDR_1` | (Required) Address for the first LED driver | |
+| `LED_DRIVER_ADDR_2` | (Optional) Address for the second LED driver | |
+| `LED_DRIVER_ADDR_3` | (Optional) Address for the third LED driver | |
+| `LED_DRIVER_ADDR_4` | (Optional) Address for the fourth LED driver | |
+
+Here is an example using 2 drivers.
 
 ```c
 // This is a 7-bit address, that gets left-shifted and bit 0
@@ -25,18 +38,16 @@ Configure the hardware via your `config.h`:
 // 0b1110111 AD <-> VCC
 // 0b1110101 AD <-> SCL
 // 0b1110110 AD <-> SDA
-#define DRIVER_ADDR_1 0b1110100
-#define DRIVER_ADDR_2 0b1110110
+#define LED_DRIVER_ADDR_1 0b1110100
+#define LED_DRIVER_ADDR_2 0b1110110
 
-#define DRIVER_COUNT 2
-#define DRIVER_1_LED_TOTAL 25
-#define DRIVER_2_LED_TOTAL 24
-#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+#define LED_DRIVER_COUNT 2
+#define LED_DRIVER_1_LED_TOTAL 25
+#define LED_DRIVER_2_LED_TOTAL 24
+#define DRIVER_LED_TOTAL (LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL)
 ```
 
-!> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
-
-Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations.
+!> Note the parentheses, this is so when `LED_DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL)` will give very different results than `rand() % LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL`.
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md
index ffbb8c0b60..a29d5c624b 100644
--- a/docs/feature_rgb_matrix.md
+++ b/docs/feature_rgb_matrix.md
@@ -15,7 +15,20 @@ RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = IS31FL3731
 ```
 
-Configure the hardware via your `config.h`:
+You can use between 1 and 4 IS31FL3731 IC's. Do not specify `DRIVER_ADDR_<N>` defines for IC's that are not present on your keyboard. You can define the following items in `config.h`:
+
+| Variable | Description | Default |
+|----------|-------------|---------|
+| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
+| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
+| `DRIVER_LED_TOTAL` | (Required) How many RGB lights are present across all drivers | |
+| `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | |
+| `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | |
+| `DRIVER_ADDR_3` | (Optional) Address for the third RGB driver | |
+| `DRIVER_ADDR_4` | (Optional) Address for the fourth RGB driver | |
+
+Here is an example using 2 drivers.
 
 ```c
 // This is a 7-bit address, that gets left-shifted and bit 0
@@ -36,8 +49,6 @@ Configure the hardware via your `config.h`:
 
 !> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
 
-Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations.
-
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
 ```c
@@ -53,12 +64,10 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 }
 ```
 
-Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now).
+Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0`, `1`, `2`, or `3`).
 
 ---
-### IS31FL3733/IS31FL3737 :id=is31fl3733is31fl3737
-
-!> For the IS31FL3737, replace all instances of `IS31FL3733` below with `IS31FL3737`.
+### IS31FL3733 :id=is31fl3733
 
 There is basic support for addressable RGB matrix lighting with the I2C IS31FL3733 RGB controller. To enable it, add this to your `rules.mk`:
 
@@ -67,7 +76,24 @@ RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = IS31FL3733
 ```
 
-Configure the hardware via your `config.h`:
+You can use between 1 and 4 IS31FL3733 IC's. Do not specify `DRIVER_ADDR_<N>` defines for IC's that are not present on your keyboard. You can define the following items in `config.h`:
+
+| Variable | Description | Default |
+|----------|-------------|---------|
+| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
+| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
+| `DRIVER_LED_TOTAL` | (Required) How many RGB lights are present across all drivers | |
+| `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | |
+| `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | |
+| `DRIVER_ADDR_3` | (Optional) Address for the third RGB driver | |
+| `DRIVER_ADDR_4` | (Optional) Address for the fourth RGB driver | |
+| `DRIVER_SYNC_1` | (Optional) Sync configuration for the first RGB driver | 0 |
+| `DRIVER_SYNC_2` | (Optional) Sync configuration for the second RGB driver | 0 |
+| `DRIVER_SYNC_3` | (Optional) Sync configuration for the third RGB driver | 0 |
+| `DRIVER_SYNC_4` | (Optional) Sync configuration for the fourth RGB driver | 0 |
+
+Here is an example using 2 drivers.
 
 ```c
 // This is a 7-bit address, that gets left-shifted and bit 0
@@ -81,6 +107,58 @@ Configure the hardware via your `config.h`:
 // ADDR2 represents A3:A2 of the 7-bit address.
 // The result is: 0b101(ADDR2)(ADDR1)
 #define DRIVER_ADDR_1 0b1010000
+#define DRIVER_ADDR_2 0b1010011
+
+#define DRIVER_COUNT 2
+#define DRIVER_1_LED_TOTAL 58
+#define DRIVER_2_LED_TOTAL 10
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+```
+
+!> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
+
+Currently only 4 drivers are supported, but it would be trivial to support all 8 combinations.
+
+Define these arrays listing all the LEDs in your `<keyboard>.c`:
+
+```c
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ *   driver
+ *   |  R location
+ *   |  |       G location
+ *   |  |       |       B location
+ *   |  |       |       | */
+    {0, B_1,    A_1,    C_1},
+    ....
+}
+```
+
+Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3733.pdf) and the header file `drivers/issi/is31fl3733.h`. The `driver` is the index of the driver you defined in your `config.h` (`0`, `1`, `2`, or `3` for now).
+
+---
+### IS31FL3737 :id=is31fl3737
+
+There is basic support for addressable RGB matrix lighting with the I2C IS31FL3737 RGB controller. To enable it, add this to your `rules.mk`:
+
+```makefile
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = IS31FL3737
+```
+
+Configure the hardware via your `config.h`:
+
+```c
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0000 <-> GND
+// 0101 <-> SCL
+// 1010 <-> SDA
+// 1111 <-> VCC
+// ADDR represents A3:A0 of the 7-bit address.
+// The result is: 0b101(ADDR)
+#define DRIVER_ADDR_1 0b1010000
 #define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
 
 #define DRIVER_COUNT 2
@@ -105,7 +183,7 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 }
 ```
 
-Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3733.pdf) and the header file `drivers/issi/is31fl3733.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0` right now).
+Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3737.pdf) and the header file `drivers/issi/is31fl3737.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0` right now).
 
 ---