is31fl3737: driver naming cleanups (#21904)

1 files changed, 18 insertions, 18 deletions

diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md
index 5cc498a9ed..76c5c4f90b 100644
--- a/docs/feature_rgb_matrix.md
+++ b/docs/feature_rgb_matrix.md
@@ -246,31 +246,31 @@ Configure the hardware via your `config.h`:
 
 | Variable | Description | Default |
 |----------|-------------|---------|
-| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
-| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
-| `ISSI_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3737B only | 0 |
-| `ISSI_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
-| `ISSI_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
-| `ISSI_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
-| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
+| `IS31FL3737_I2C_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
+| `IS31FL3737_I2C_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `IS31FL3737_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3737B only | 0 |
+| `IS31FL3737_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
+| `IS31FL3737_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
+| `IS31FL3737_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
+| `IS31FL3737_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
 | `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
 | `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | |
 | `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | |
 | `DRIVER_ADDR_3` | (Optional) Address for the third RGB driver | |
 | `DRIVER_ADDR_4` | (Optional) Address for the fourth RGB driver | |
 
-The IS31FL3737 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`ISSI_SWPULLUP`/`ISSI_CSPULLUP` are given the value of`PUR_0R`), the values that can be set to enable de-ghosting are as follows:
+The IS31FL3737 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`IS31FL3737_SWPULLUP`/`IS31FL3737_CSPULLUP` are given the value of `IS31FL3737_PUR_0R`), the values that can be set to enable de-ghosting are as follows:
 
-| `ISSI_SWPULLUP/ISSI_CSPULLUP` | Description |
+| `IS31FL3737_SWPULLUP/IS31FL3737_CSPULLUP` | Description |
 |----------------------|-------------|
-| `PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting |
-| `PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_1KR` | The 1k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_2KR` | The 2k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_4KR` | The 4k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_8KR` | The 8k Ohm resistor during blanking period (t_NOL) |
-| `PUR_16KR` | The 16k Ohm resistor during blanking period (t_NOL) |
-| `PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3737_PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting |
+| `IS31FL3737_PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3737_PUR_1KR` | The 1k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3737_PUR_2KR` | The 2k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3737_PUR_4KR` | The 4k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3737_PUR_8KR` | The 8k Ohm resistor during blanking period (t_NOL) |
+| `IS31FL3737_PUR_16KR` | The 16k Ohm resistor during blanking period (t_NOL) |
+| `IS31FL3737_PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) |
 
 Here is an example using 2 drivers.
 
@@ -287,7 +287,7 @@ Here is an example using 2 drivers.
 #define DRIVER_ADDR_1 0b1010000
 #define DRIVER_ADDR_2 0b1010001
 
-#define DRIVER_COUNT 2
+#define IS31FL3737_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 30
 #define DRIVER_2_LED_TOTAL 36
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)