[Keyboard] YMDK YM68 (#12352)

* [Keyboard] YMDK YM68

Converted from a KBFirmware JSON file provided via the vendor's product listing.

PCB supports Backlight on B6 and RGB Underglow on E2, but the LEDs are not pre-soldered according to the PCB photos.

* update VENDOR_ID and PRODUCT_ID

7 files changed, 286 insertions, 0 deletions

diff --git a/keyboards/ymdk/ym68/config.h b/keyboards/ymdk/ym68/config.h
new file mode 100644
index 0000000000..30d6b4c686
--- /dev/null
+++ b/keyboards/ymdk/ym68/config.h
@@ -0,0 +1,71 @@
+/* Copyright 2021 James Young (@noroadsleft)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x594D // "YM"
+#define PRODUCT_ID      0xD896
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    YMDK
+#define PRODUCT         YM68
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0 }
+
+#define DIODE_DIRECTION ROW2COL
+
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+#define RGB_DI_PIN E2
+#if defined(RGBLIGHT_ENABLE)
+    #define RGBLED_NUM 20
+    #define RGBLIGHT_HUE_STEP 8
+    #define RGBLIGHT_SAT_STEP 8
+    #define RGBLIGHT_VAL_STEP 8
+    #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+    #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//     #define RGBLIGHT_EFFECT_BREATHING
+//     #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//     #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//     #define RGBLIGHT_EFFECT_SNAKE
+//     #define RGBLIGHT_EFFECT_KNIGHT
+//     #define RGBLIGHT_EFFECT_CHRISTMAS
+//     #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//     #define RGBLIGHT_EFFECT_RGB_TEST
+//     #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
diff --git a/keyboards/ymdk/ym68/info.json b/keyboards/ymdk/ym68/info.json
new file mode 100644
index 0000000000..ee218f7738
--- /dev/null
+++ b/keyboards/ymdk/ym68/info.json
@@ -0,0 +1,83 @@
+{
+    "keyboard_name": "YM68",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 16,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"label":"K00 (B0,D0)", "x":0, "y":0},
+                {"label":"K01 (B0,D1)", "x":1, "y":0},
+                {"label":"K02 (B0,D2)", "x":2, "y":0},
+                {"label":"K03 (B0,D3)", "x":3, "y":0},
+                {"label":"K04 (B0,D5)", "x":4, "y":0},
+                {"label":"K05 (B0,D4)", "x":5, "y":0},
+                {"label":"K06 (B0,D6)", "x":6, "y":0},
+                {"label":"K07 (B0,D7)", "x":7, "y":0},
+                {"label":"K08 (B0,B4)", "x":8, "y":0},
+                {"label":"K09 (B0,F7)", "x":9, "y":0},
+                {"label":"K0A (B0,F6)", "x":10, "y":0},
+                {"label":"K0B (B0,F5)", "x":11, "y":0},
+                {"label":"K0C (B0,F4)", "x":12, "y":0},
+                {"label":"K0D (B0,F1)", "x":13, "y":0},
+                {"label":"K0E (B0,F0)", "x":14, "y":0},
+                {"label":"K4E (B7,F0)", "x":15, "y":0},
+                {"label":"K10 (B1,D0)", "x":0, "y":1, "w":1.5},
+                {"label":"K11 (B1,D1)", "x":1.5, "y":1},
+                {"label":"K12 (B1,D2)", "x":2.5, "y":1},
+                {"label":"K13 (B1,D3)", "x":3.5, "y":1},
+                {"label":"K14 (B1,D5)", "x":4.5, "y":1},
+                {"label":"K15 (B1,D4)", "x":5.5, "y":1},
+                {"label":"K16 (B1,D6)", "x":6.5, "y":1},
+                {"label":"K17 (B1,D7)", "x":7.5, "y":1},
+                {"label":"K18 (B1,B4)", "x":8.5, "y":1},
+                {"label":"K19 (B1,F7)", "x":9.5, "y":1},
+                {"label":"K1A (B1,F6)", "x":10.5, "y":1},
+                {"label":"K1B (B1,F5)", "x":11.5, "y":1},
+                {"label":"K1C (B1,F4)", "x":12.5, "y":1},
+                {"label":"K2C (B2,F4)", "x":13.5, "y":1, "w":1.5},
+                {"label":"K1E (B1,F0)", "x":15, "y":1},
+                {"label":"K20 (B2,D0)", "x":0, "y":2, "w":1.75},
+                {"label":"K21 (B2,D1)", "x":1.75, "y":2},
+                {"label":"K22 (B2,D2)", "x":2.75, "y":2},
+                {"label":"K23 (B2,D3)", "x":3.75, "y":2},
+                {"label":"K24 (B2,D5)", "x":4.75, "y":2},
+                {"label":"K25 (B2,D4)", "x":5.75, "y":2},
+                {"label":"K26 (B2,D6)", "x":6.75, "y":2},
+                {"label":"K27 (B2,D7)", "x":7.75, "y":2},
+                {"label":"K28 (B2,B4)", "x":8.75, "y":2},
+                {"label":"K29 (B2,F7)", "x":9.75, "y":2},
+                {"label":"K2A (B2,F6)", "x":10.75, "y":2},
+                {"label":"K2B (B2,F5)", "x":11.75, "y":2},
+                {"label":"K1D (B1,F1)", "x":12.75, "y":2, "w":2.25},
+                {"label":"K2E (B2,F0)", "x":15, "y":2},
+                {"label":"K30 (B3,D0)", "x":0, "y":3, "w":1.25},
+                {"label":"K31 (B3,D1)", "x":1.25, "y":3},
+                {"label":"K32 (B3,D2)", "x":2.25, "y":3},
+                {"label":"K33 (B3,D3)", "x":3.25, "y":3},
+                {"label":"K34 (B3,D5)", "x":4.25, "y":3},
+                {"label":"K35 (B3,D4)", "x":5.25, "y":3},
+                {"label":"K36 (B3,D6)", "x":6.25, "y":3},
+                {"label":"K37 (B3,D7)", "x":7.25, "y":3},
+                {"label":"K38 (B3,B4)", "x":8.25, "y":3},
+                {"label":"K39 (B3,F7)", "x":9.25, "y":3},
+                {"label":"K3A (B3,F6)", "x":10.25, "y":3},
+                {"label":"K3B (B3,F5)", "x":11.25, "y":3},
+                {"label":"K3C (B3,F4)", "x":12.25, "y":3, "w":1.75},
+                {"label":"K3D (B3,F1)", "x":14, "y":3},
+                {"label":"K3E (B3,F0)", "x":15, "y":3},
+                {"label":"K40 (B7,D0)", "x":0, "y":4, "w":1.25},
+                {"label":"K41 (B7,D1)", "x":1.25, "y":4, "w":1.25},
+                {"label":"K42 (B7,D2)", "x":2.5, "y":4, "w":1.25},
+                {"label":"K46 (B7,D6)", "x":3.75, "y":4, "w":6.25},
+                {"label":"K48 (B7,B4)", "x":10, "y":4},
+                {"label":"K49 (B7,F7)", "x":11, "y":4},
+                {"label":"K4A (B7,F6)", "x":12, "y":4},
+                {"label":"K4B (B7,F5)", "x":13, "y":4},
+                {"label":"K4C (B7,F4)", "x":14, "y":4},
+                {"label":"K4D (B7,F1)", "x":15, "y":4}
+            ]
+        }
+    }
+}
diff --git a/keyboards/ymdk/ym68/keymaps/default/keymap.c b/keyboards/ymdk/ym68/keymaps/default/keymap.c
new file mode 100644
index 0000000000..1293cf9f92
--- /dev/null
+++ b/keyboards/ymdk/ym68/keymaps/default/keymap.c
@@ -0,0 +1,34 @@
+/* Copyright 2021 James Young (@noroadsleft)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_all(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_BSPC, KC_DEL,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,      KC_PGUP,
+        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,              KC_PGDN,
+        KC_LSFT,   KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,        KC_UP,   MO(1),
+        KC_LCTL,   KC_LGUI,   KC_LALT,                       KC_SPC,                              KC_RALT, KC_APP,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT_all(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, KC_PSCR,
+        RGB_TOG,     _______, KC_UP,   _______, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______,      KC_HOME,
+        BL_TOGG,       KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______,             KC_END,
+        _______,   _______, _______, BL_DEC,  BL_TOGG, BL_INC,  _______, _______, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______,        _______, _______,
+        _______,   _______,   _______,                      _______,                              _______, _______, _______, _______, _______, _______
+    ),
+};
diff --git a/keyboards/ymdk/ym68/readme.md b/keyboards/ymdk/ym68/readme.md
new file mode 100644
index 0000000000..5437375dfd
--- /dev/null
+++ b/keyboards/ymdk/ym68/readme.md
@@ -0,0 +1,24 @@
+# YM68
+
+![YM68](https://raw.githubusercontent.com/noroadsleft/qmk_images/master/keyboards/ymdk/ym68/HTB17n9gQMHqK1RjSZFEq6AGMXXaq_640.jpg)
+
+A 65% keyboard kit with support for in-switch LEDs and RGB Underglow.
+
+* Keyboard Maintainer: [The QMK Community](https://github.com/qmk)
+* Hardware Supported: YMDK YM68 PCB (ATmega32U4)
+* Hardware Availability: [AliExpress](https://www.aliexpress.com/i/32999629504.html), [ymdkey.com](https://ymdkey.com/collections/68-71-keyboard-diy/products/ymdk-fully-programmable-68-cnc-aluminum-case-plate-pcb-stabilizers-mechanical-keyboard-diy-kit?variant=30994625232957)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ymdk/ym68:default
+
+Flashing example for this keyboard:
+
+    make ymdk/ym68:default:flash
+
+To reset the board into bootloader mode, do one of the following:
+
+* Tap the Reset switch mounted on the bottom side of the PCB
+* Hold the key at the top left of the keyboard while connecting the USB cable (also erases persistent settings)
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/ymdk/ym68/rules.mk b/keyboards/ymdk/ym68/rules.mk
new file mode 100644
index 0000000000..a48a691a91
--- /dev/null
+++ b/keyboards/ymdk/ym68/rules.mk
@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
diff --git a/keyboards/ymdk/ym68/ym68.c b/keyboards/ymdk/ym68/ym68.c
new file mode 100644
index 0000000000..3ec4d97b22
--- /dev/null
+++ b/keyboards/ymdk/ym68/ym68.c
@@ -0,0 +1,17 @@
+/* Copyright 2021 James Young (@noroadsleft)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "ym68.h"
diff --git a/keyboards/ymdk/ym68/ym68.h b/keyboards/ymdk/ym68/ym68.h
new file mode 100644
index 0000000000..42b2a990ca
--- /dev/null
+++ b/keyboards/ymdk/ym68/ym68.h
@@ -0,0 +1,35 @@
+/* Copyright 2021 James Young (@noroadsleft)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+#define LAYOUT_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K4E, \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C,    K1E, \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D,        K2E, \
+    K30,  K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,     K3D, K3E, \
+    K40,  K41,  K42,              K46,                K48, K49, K4A, K4B, K4C, K4D  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, ___, K2E }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+    { K40, K41, K42, ___, ___, ___, K46, ___, K48, K49, K4A, K4B, K4C, K4D, K4E }  \
+}