Merge remote-tracking branch 'origin/master' into develop

8 files changed, 301 insertions, 0 deletions

diff --git a/keyboards/flxlb/zplit/config.h b/keyboards/flxlb/zplit/config.h
new file mode 100644
index 0000000000..83fe084844
--- /dev/null
+++ b/keyboards/flxlb/zplit/config.h
@@ -0,0 +1,90 @@
+/*
+Copyright 2021 fluxlab
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x7076
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    fluxlab
+#define PRODUCT         zplit
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 6
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, F5, F4, F1 }
+#define MATRIX_COL_PINS { B2, B3, D6, D7, B4, B5 }
+// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* configuration for split keyboard */
+#define SOFT_SERIAL_PIN D0
+#define SELECT_SOFT_SERIAL_SPEED 1
+// #define USE_I2C
+#define SPLIT_USB_DETECT
+#define SPLIT_USB_TIMEOUT 500
+
+#define ENCODERS_PAD_A { B0 }
+#define ENCODERS_PAD_B { D2 }
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLED_NUM 16
+#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 7, 15, 14, 13, 12, 11, 10, 9, 8}
+#define RGBLED_SPLIT { 8, 8 }
+#define RGBLIGHT_SPLIT
+#define RGBLIGHT_ANIMATIONS
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
diff --git a/keyboards/flxlb/zplit/info.json b/keyboards/flxlb/zplit/info.json
new file mode 100644
index 0000000000..7cf3f0078a
--- /dev/null
+++ b/keyboards/flxlb/zplit/info.json
@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "zplit",
+  "url": "https://github.com/cccywj/qmk_firmware",
+  "maintainer": "flxlb",
+  "width": 13,
+  "height": 4,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}]
+    }
+  }
+}
diff --git a/keyboards/flxlb/zplit/keymaps/via/config.h b/keyboards/flxlb/zplit/keymaps/via/config.h
new file mode 100644
index 0000000000..a157047f7a
--- /dev/null
+++ b/keyboards/flxlb/zplit/keymaps/via/config.h
@@ -0,0 +1,28 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+//#define USE_I2C
+
+/* Select hand configuration */
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
diff --git a/keyboards/flxlb/zplit/keymaps/via/keymap.c b/keyboards/flxlb/zplit/keymaps/via/keymap.c
new file mode 100644
index 0000000000..7f92c80e29
--- /dev/null
+++ b/keyboards/flxlb/zplit/keymaps/via/keymap.c
@@ -0,0 +1,80 @@
+/* Copyright 2021 FluxLab
+ * 
+ * This program is free software: you can redistribute it and/or modify 
+ * it under the terms of the GNU General Public License as published by 
+ * the Free Software Foundation, either version 2 of the License, or 
+ * (at your option) any later version. 
+ * 
+ * This program is distributed in the hope that it will be useful, 
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+ * GNU General Public License for more details. 
+ * 
+ * You should have received a copy of the GNU General Public License 
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+ */ 
+
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum custom_layers {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+}; 
+
+#define LOWER  MO(_LOWER)
+#define RAISE  MO(_RAISE)
+#define ADJUST MO(_ADJUST)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty */
+[_QWERTY] = LAYOUT(
+   KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_MUTE,
+   KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,
+   KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT ,
+   KC_LCTL, KC_LGUI, KC_LALT, KC_DEL,   LOWER,  KC_SPC,  KC_BSPC,  RAISE,   KC_LBRC, KC_RBRC, KC_QUOT,   KC_MINS
+),
+
+/* Lower */
+[_LOWER] = LAYOUT(
+  KC_GRV, KC_1, KC_2,   KC_3, KC_4,  KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______,
+  _______,  _______,  _______,  KC_UP,   _______,   _______,  _______,  KC_4, KC_5, KC_6, _______, _______,
+  _______, _______,   KC_LEFT,   KC_DOWN,   KC_RGHT,  _______,  _______,KC_1,KC_2,KC_3, KC_BSLS, _______,
+  _______, _______, _______, _______, LOWER, _______, _______, KC_0,KC_0, KC_DOT, KC_BSLS,KC_EQL
+),
+
+/* Raise */
+[_RAISE] = LAYOUT(
+  KC_F1,  KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,    KC_F11,    KC_F12,
+  RGB_HUI,  RGB_SAI,   RGB_VAI,   RGB_MOD,   _______,   RGB_TOG,   _______,   _______, _______,  _______, _______, _______,
+  RGB_HUD, RGB_SAD,   RGB_VAD,   RGB_RMOD,   _______,  RGB_TOG,  _______,  _______, _______, _______, KC_UP, _______,
+  _______, _______, _______, _______, _______, _______, _______, RAISE, _______, KC_LEFT, KC_DOWN, KC_RGHT
+),
+
+/* Adjust (Lower + Raise) */
+[_ADJUST] =  LAYOUT(
+  _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______,   _______,  _______, _______, _______,  _______, _______,  _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+)
+
+
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+  if (clockwise) {
+    tap_code(KC_VOLD);
+  } else {
+    tap_code(KC_VOLU);
+  }
+}
diff --git a/keyboards/flxlb/zplit/readme.md b/keyboards/flxlb/zplit/readme.md
new file mode 100644
index 0000000000..e5f88c9df5
--- /dev/null
+++ b/keyboards/flxlb/zplit/readme.md
@@ -0,0 +1,13 @@
+# fluxlab zplit
+
+![zplit](https://i.imgur.com/eN4aSG1l.png)
+
+Zplit is a 40% split keyboard inspired by the Zlant and similar to Zinc. It has a symmetrical layout to provide a more natural typing experience.
+
+* Keyboard Maintainer: [flxlb](https://flxlb.ca)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make flxlb/zplit:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/flxlb/zplit/rules.mk b/keyboards/flxlb/zplit/rules.mk
new file mode 100644
index 0000000000..121bba1dfc
--- /dev/null
+++ b/keyboards/flxlb/zplit/rules.mk
@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes
+SPLIT_KEYBOARD = yes
diff --git a/keyboards/flxlb/zplit/zplit.c b/keyboards/flxlb/zplit/zplit.c
new file mode 100644
index 0000000000..25956640a7
--- /dev/null
+++ b/keyboards/flxlb/zplit/zplit.c
@@ -0,0 +1,17 @@
+/* Copyright 2021 FluxLab
+ * 
+ * This program is free software: you can redistribute it and/or modify 
+ * it under the terms of the GNU General Public License as published by 
+ * the Free Software Foundation, either version 2 of the License, or 
+ * (at your option) any later version. 
+ * 
+ * This program is distributed in the hope that it will be useful, 
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+ * GNU General Public License for more details. 
+ * 
+ * You should have received a copy of the GNU General Public License 
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+ */ 
+
+#include "zplit.h"
diff --git a/keyboards/flxlb/zplit/zplit.h b/keyboards/flxlb/zplit/zplit.h
new file mode 100644
index 0000000000..6a90efa8af
--- /dev/null
+++ b/keyboards/flxlb/zplit/zplit.h
@@ -0,0 +1,37 @@
+ /* Copyright 2021 FluxLab 
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+
+#pragma once
+
+#include "quantum.h"
+
+
+#define LAYOUT( \
+	L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+	L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+	L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+	L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05 }, \
+		{ L10, L11, L12, L13, L14, L15 }, \
+		{ L20, L21, L22, L23, L24, L25 }, \
+		{ L30, L31, L32, L33, L34, L35 }, \
+		{ R05, R04, R03, R02, R01, R00 }, \
+		{ R15, R14, R13, R12, R11, R10 }, \
+		{ R25, R24, R23, R22, R21, R20 }, \
+		{ R35, R34, R33, R32, R31, R30 } \
+	}