1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
|
/* Copyright (C) 2012 Kristian Lauszus, TKJ Electronics. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Kristian Lauszus, TKJ Electronics
Web : http://www.tkjelectronics.com
e-mail : kristianl@tkjelectronics.com
*/
#ifndef _ps3enums_h
#define _ps3enums_h
#include "controllerEnums.h"
/** Size of the output report buffer for the Dualshock and Navigation controllers */
#define PS3_REPORT_BUFFER_SIZE 48
/** Report buffer for all PS3 commands */
const uint8_t PS3_REPORT_BUFFER[PS3_REPORT_BUFFER_SIZE] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00,
0xff, 0x27, 0x10, 0x00, 0x32,
0xff, 0x27, 0x10, 0x00, 0x32,
0xff, 0x27, 0x10, 0x00, 0x32,
0xff, 0x27, 0x10, 0x00, 0x32,
0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/** Size of the output report buffer for the Move Controller */
#define MOVE_REPORT_BUFFER_SIZE 7
/** Used to set the LEDs on the controllers */
const uint8_t PS3_LEDS[] PROGMEM = {
0x00, // OFF
0x01, // LED1
0x02, // LED2
0x04, // LED3
0x08, // LED4
0x09, // LED5
0x0A, // LED6
0x0C, // LED7
0x0D, // LED8
0x0E, // LED9
0x0F, // LED10
};
/**
* Buttons on the controllers.
* <B>Note:</B> that the location is shifted 9 when it's connected via USB.
*/
const uint32_t PS3_BUTTONS[] PROGMEM = {
0x10, // UP
0x20, // RIGHT
0x40, // DOWN
0x80, // LEFT
0x01, // SELECT
0x08, // START
0x02, // L3
0x04, // R3
0x0100, // L2
0x0200, // R2
0x0400, // L1
0x0800, // R1
0x1000, // TRIANGLE
0x2000, // CIRCLE
0x4000, // CROSS
0x8000, // SQUARE
0x010000, // PS
0x080000, // MOVE - covers 12 bits - we only need to read the top 8
0x100000, // T - covers 12 bits - we only need to read the top 8
};
/**
* Analog buttons on the controllers.
* <B>Note:</B> that the location is shifted 9 when it's connected via USB.
*/
const uint8_t PS3_ANALOG_BUTTONS[] PROGMEM = {
23, // UP_ANALOG
24, // RIGHT_ANALOG
25, // DOWN_ANALOG
26, // LEFT_ANALOG
0, 0, 0, 0, // Skip SELECT, L3, R3 and START
27, // L2_ANALOG
28, // R2_ANALOG
29, // L1_ANALOG
30, // R1_ANALOG
31, // TRIANGLE_ANALOG
32, // CIRCLE_ANALOG
33, // CROSS_ANALOG
34, // SQUARE_ANALOG
0, 0, // Skip PS and MOVE
// Playstation Move Controller
15, // T_ANALOG - Both at byte 14 (last reading) and byte 15 (current reading)
};
enum StatusEnum {
// Note that the location is shifted 9 when it's connected via USB
// Byte location | bit location
Plugged = (38 << 8) | 0x02,
Unplugged = (38 << 8) | 0x03,
Charging = (39 << 8) | 0xEE,
NotCharging = (39 << 8) | 0xF1,
Shutdown = (39 << 8) | 0x01,
Dying = (39 << 8) | 0x02,
Low = (39 << 8) | 0x03,
High = (39 << 8) | 0x04,
Full = (39 << 8) | 0x05,
MoveCharging = (21 << 8) | 0xEE,
MoveNotCharging = (21 << 8) | 0xF1,
MoveShutdown = (21 << 8) | 0x01,
MoveDying = (21 << 8) | 0x02,
MoveLow = (21 << 8) | 0x03,
MoveHigh = (21 << 8) | 0x04,
MoveFull = (21 << 8) | 0x05,
CableRumble = (40 << 8) | 0x10, // Operating by USB and rumble is turned on
Cable = (40 << 8) | 0x12, // Operating by USB and rumble is turned off
BluetoothRumble = (40 << 8) | 0x14, // Operating by Bluetooth and rumble is turned on
Bluetooth = (40 << 8) | 0x16, // Operating by Bluetooth and rumble is turned off
};
#endif
|
