blob: 2f89d1de6164bf078c2aadff3f7df5772c9a0ce1 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
|
# Let's Split Flashing
(More information at `qmk_firmware/layouts/community/ortho_3x10/wanleg/readme.md`)
## Make the QMK DFU .hex
`make lets_split/rev2:wanleg:production dfu=qmk`
## Burning EEPROM settings and Firmware
Navigate to the directory with your .hex file and the `eeprom-lefthand.eep` and `eeprom-righthand.eep` files in it.
**Burn Left Side With QMK DFU and Firmware**
`avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U eeprom:w:eeprom-lefthand.eep -P comPORT -U flash:w:YOUR_production.hex:a`
**Burn Right Side With QMK DFU and Firmware**
`avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U eeprom:w:eeprom-righthand.eep -P comPORT -U flash:w:YOUR_production.hex:a`
Change `comPORT` to whatever port is used by the Arduino (e.g. `com11` in Windows or `/dev/ttyACM0` in Linux). Use Device Manager in Windows to find the port being used. Use `ls /dev/tty*` in Linux. Change `YOUR_production.hex` to whatever you've created in the previous step.
## Using QMK DFU
Once QMK DFU is burned to your ProMicro, you can then flash subsequent hex files with
`make lets_split/rev2:<keymap>:dfu dfu=qmk`
The `dfu=qmk` conditional will set `BOOTLOADER = qmk-dfu` instead of `BOOTLOADER = caterina`
---
# JJ40
## To Do
- [ ] Mousekeys not working with Userspace for some reason (jj40 only)
|
