1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
|
/* Copyright 2020 QMK
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS \
{ \
LINE_PIN8, /* ROW_EQL */ \
LINE_PIN9, /* ROW_1 */ \
LINE_PIN10, /* ROW_2 */ \
LINE_PIN11, /* ROW_3 */ \
LINE_PIN7, /* ROW_4 */ \
LINE_PIN16, /* ROW_5 */ \
LINE_PIN5, /* ROW_6 */ \
LINE_PIN3, /* ROW_7 */ \
LINE_PIN4, /* ROW_8 */ \
LINE_PIN1, /* ROW_9 */ \
LINE_PIN0, /* ROW_0 */ \
LINE_PIN2, /* ROW_MIN */ \
LINE_PIN17, /* ROW_ESC */ \
LINE_PIN23, /* ROW_F1 */ \
LINE_PIN21 /* ROW_F2 */ \
}
#define MATRIX_COL_PINS \
{ \
LINE_PIN18, /* COL_0 */ \
LINE_PIN14, /* COL_1 */ \
LINE_PIN15, /* COL_2 */ \
LINE_PIN20, /* COL_3 */ \
LINE_PIN22, /* COL_4 */ \
LINE_PIN19, /* COL_5 */ \
LINE_PIN6 /* COL_6 */ \
}
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
#define IGNORE_MOD_TAP_INTERRUPT
// The Teensy 4.1 consumes about 100 mA of current at its full speed of 600 MHz
// as per https://www.pjrc.com/store/teensy41.html
#define USB_MAX_POWER_CONSUMPTION 100
/* We use the i.MX RT1060 high-speed GPIOs (GPIO6-9) which are connected to the
* AHB bus (AHB_CLK_ROOT), which runs at the same speed as the ARM Core Clock,
* i.e. 600 MHz. See MIMXRT1062, page 949, 12.1 Chip-specific GPIO information.
* No additional delay is necessary. */
// in clock cycles
#define GPIO_INPUT_PIN_DELAY 0
|
