blob: 6e3f8372c9be2fe582e6b4545fac394e33b1b60c (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
|
# Atmel AVR
QMK should run on any Atmel AVR processor with enough Flash. It has been tested on the following:
* ATmega32U4 ([PJRC Teensy 2.0](http://www.pjrc.com/teensy/))
* AT90USB1286 ([PJRC Teensy++ 2.0](http://www.pjrc.com/teensy/))
* AT90USB1287 ([Atmel USBKEY](http://www.atmel.com/tools/AT90USBKEY.aspx))
* ATmega168P with using [V-USB](http://www.obdev.at/products/vusb/index.html)
* ATmega328P with using [V-USB](http://www.obdev.at/products/vusb/index.html)
* ATmega32U2
* AT90USB1286, 646, 647 should work
* AT90USB162 testing...
NOTE: To enable full features of firmware you'll need 32KB flash size.
Please add any tested microcontrollers to this list.
# ARM
You can also use any ARM processor that [ChibiOS](http://www.chibios.org) supports. The following processors have been tested:
* [Kinetis MKL26Z64](http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/kinetis-cortex-m-mcus/l-series-ultra-low-power-m0-plus/kinetis-kl2x-48-mhz-usb-ultra-low-power-microcontrollers-mcus-based-on-arm-cortex-m0-plus-core:KL2x)
* [Kinetis MK20DX128](http://www.nxp.com/assets/documents/data/en/data-sheets/K20P64M50SF0.pdf)
* [Kinetis MK20DX128](http://www.nxp.com/assets/documents/data/en/data-sheets/K20P64M50SF0.pdf)
* [Kinetis MK20DX256](http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/kinetis-cortex-m-mcus/k-series-performance-m4/k2x-usb/kinetis-k20-72-mhz-full-speed-usb-mixed-signal-integration-microcontrollers-mcus-based-on-arm-cortex-m4-core:K20_72)
|
