diff options
Diffstat (limited to 'tmk_core')
30 files changed, 2300 insertions, 2170 deletions
diff --git a/tmk_core/common.mk b/tmk_core/common.mk index 21b894e2be..0b767eb047 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -85,6 +85,10 @@ ifeq ($(strip $(BLUETOOTH_ENABLE)), yes) OPT_DEFS += -DBLUETOOTH_ENABLE endif +ifeq ($(strip $(ONEHAND_ENABLE)), yes) + OPT_DEFS += -DONEHAND_ENABLE +endif + ifeq ($(strip $(KEYMAP_SECTION_ENABLE)), yes) OPT_DEFS += -DKEYMAP_SECTION_ENABLE diff --git a/tmk_core/common/action.c b/tmk_core/common/action.c index be6dea2b79..08ef22eb97 100644 --- a/tmk_core/common/action.c +++ b/tmk_core/common/action.c @@ -41,6 +41,12 @@ void action_exec(keyevent_t event) dprint("EVENT: "); debug_event(event); dprintln(); } +#ifdef ONEHAND_ENABLE + if (!IS_NOEVENT(event)) { + process_hand_swap(&event); + } +#endif + keyrecord_t record = { .event = event }; #ifndef NO_ACTION_TAPPING @@ -53,6 +59,26 @@ void action_exec(keyevent_t event) #endif } +#ifdef ONEHAND_ENABLE +bool swap_hands = false; + +void process_hand_swap(keyevent_t *event) { + static swap_state_row_t swap_state[MATRIX_ROWS]; + + keypos_t pos = event->key; + swap_state_row_t col_bit = (swap_state_row_t)1<<pos.col; + bool do_swap = event->pressed ? swap_hands : + swap_state[pos.row] & (col_bit); + + if (do_swap) { + event->key = hand_swap_config[pos.row][pos.col]; + swap_state[pos.row] |= col_bit; + } else { + swap_state[pos.row] &= ~(col_bit); + } +} +#endif + #if !defined(NO_ACTION_LAYER) && defined(PREVENT_STUCK_MODIFIERS) bool disable_action_cache = false; @@ -440,6 +466,54 @@ void process_action(keyrecord_t *record, action_t action) #endif case ACT_COMMAND: break; +#ifdef ONEHAND_ENABLE + case ACT_SWAP_HANDS: + switch (action.swap.code) { + case OP_SH_TOGGLE: + if (event.pressed) { + swap_hands = !swap_hands; + } + break; + case OP_SH_ON_OFF: + swap_hands = event.pressed; + break; + case OP_SH_OFF_ON: + swap_hands = !event.pressed; + break; + case OP_SH_ON: + if (!event.pressed) { + swap_hands = true; + } + break; + case OP_SH_OFF: + if (!event.pressed) { + swap_hands = false; + } + break; + #ifndef NO_ACTION_TAPPING + case OP_SH_TAP_TOGGLE: + /* tap toggle */ + if (tap_count > 0) { + if (!event.pressed) { + swap_hands = !swap_hands; + } + } else { + swap_hands = event.pressed; + } + break; + default: + if (tap_count > 0) { + if (event.pressed) { + register_code(action.swap.code); + } else { + unregister_code(action.swap.code); + } + } else { + swap_hands = event.pressed; + } + #endif + } +#endif #ifndef NO_ACTION_FUNCTION case ACT_FUNCTION: action_function(record, action.func.id, action.func.opt); @@ -652,6 +726,13 @@ bool is_tap_key(keypos_t key) return true; } return false; + case ACT_SWAP_HANDS: + switch (action.swap.code) { + case 0x00 ... 0xdf: + case OP_SH_TAP_TOGGLE: + return true; + } + return false; case ACT_MACRO: case ACT_FUNCTION: if (action.func.opt & FUNC_TAP) { return true; } @@ -692,6 +773,7 @@ void debug_action(action_t action) case ACT_MACRO: dprint("ACT_MACRO"); break; case ACT_COMMAND: dprint("ACT_COMMAND"); break; case ACT_FUNCTION: dprint("ACT_FUNCTION"); break; + case ACT_SWAP_HANDS: dprint("ACT_SWAP_HANDS"); break; default: dprint("UNKNOWN"); break; } dprintf("[%X:%02X]", action.kind.param>>8, action.kind.param&0xff); diff --git a/tmk_core/common/action.h b/tmk_core/common/action.h index e8aa12a7cb..b9bdfe642c 100644 --- a/tmk_core/common/action.h +++ b/tmk_core/common/action.h @@ -65,6 +65,24 @@ bool process_record_quantum(keyrecord_t *record); #if !defined(NO_ACTION_LAYER) && defined(PREVENT_STUCK_MODIFIERS) extern bool disable_action_cache; #endif + +/* Code for handling one-handed key modifiers. */ +#ifdef ONEHAND_ENABLE +extern bool swap_hands; +extern const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS]; +#if (MATRIX_COLS <= 8) +typedef uint8_t swap_state_row_t; +#elif (MATRIX_COLS <= 16) +typedef uint16_t swap_state_row_t; +#elif (MATRIX_COLS <= 32) +typedef uint32_t swap_state_row_t; +#else +#error "MATRIX_COLS: invalid value" +#endif + +void process_hand_swap(keyevent_t *record); +#endif + void process_record_nocache(keyrecord_t *record); void process_record(keyrecord_t *record); void process_action(keyrecord_t *record, action_t action); diff --git a/tmk_core/common/action_code.h b/tmk_core/common/action_code.h index ca729aaece..33da35f35f 100644 --- a/tmk_core/common/action_code.h +++ b/tmk_core/common/action_code.h @@ -108,6 +108,8 @@ enum action_kind_id { /* Other Keys */ ACT_USAGE = 0b0100, ACT_MOUSEKEY = 0b0101, + /* One-hand Support */ + ACT_SWAP_HANDS = 0b0110, /* Layer Actions */ ACT_LAYER = 0b1000, ACT_LAYER_TAP = 0b1010, /* Layer 0-15 */ @@ -178,6 +180,11 @@ typedef union { uint8_t opt :4; uint8_t kind :4; } func; + struct action_swap { + uint8_t code :8; + uint8_t opt :4; + uint8_t kind :4; + } swap; } action_t; @@ -295,6 +302,7 @@ enum backlight_opt { BACKLIGHT_STEP = 3, BACKLIGHT_LEVEL = 4, }; + /* Macro */ #define ACTION_MACRO(id) ACTION(ACT_MACRO, (id)) #define ACTION_MACRO_TAP(id) ACTION(ACT_MACRO, FUNC_TAP<<8 | (id)) @@ -306,7 +314,7 @@ enum backlight_opt { #define ACTION_BACKLIGHT_STEP() ACTION(ACT_BACKLIGHT, BACKLIGHT_STEP << 8) #define ACTION_BACKLIGHT_LEVEL(level) ACTION(ACT_BACKLIGHT, BACKLIGHT_LEVEL << 8 | (level)) /* Command */ -#define ACTION_COMMAND(id, opt) ACTION(ACT_COMMAND, (opt)<<8 | (addr)) +#define ACTION_COMMAND(id, opt) ACTION(ACT_COMMAND, (opt)<<8 | (id)) /* Function */ enum function_opts { FUNC_TAP = 0x8, /* indciates function is tappable */ @@ -314,5 +322,23 @@ enum function_opts { #define ACTION_FUNCTION(id) ACTION(ACT_FUNCTION, (id)) #define ACTION_FUNCTION_TAP(id) ACTION(ACT_FUNCTION, FUNC_TAP<<8 | (id)) #define ACTION_FUNCTION_OPT(id, opt) ACTION(ACT_FUNCTION, (opt)<<8 | (id)) +/* OneHand Support */ +enum swap_hands_pram_tap_op { + OP_SH_TOGGLE = 0xF0, + OP_SH_TAP_TOGGLE, + OP_SH_ON_OFF, + OP_SH_OFF_ON, + OP_SH_OFF, + OP_SH_ON, +}; + +#define ACTION_SWAP_HANDS() ACTION_SWAP_HANDS_ON_OFF() +#define ACTION_SWAP_HANDS_TOGGLE() ACTION(ACT_SWAP_HANDS, OP_SH_TOGGLE) +#define ACTION_SWAP_HANDS_TAP_TOGGLE() ACTION(ACT_SWAP_HANDS, OP_SH_TAP_TOGGLE) +#define ACTION_SWAP_HANDS_TAP_KEY(key) ACTION(ACT_SWAP_HANDS, key) +#define ACTION_SWAP_HANDS_ON_OFF() ACTION(ACT_SWAP_HANDS, OP_SH_ON_OFF) +#define ACTION_SWAP_HANDS_OFF_ON() ACTION(ACT_SWAP_HANDS, OP_SH_OFF_ON) +#define ACTION_SWAP_HANDS_ON() ACTION(ACT_SWAP_HANDS, OP_SH_ON) +#define ACTION_SWAP_HANDS_OFF() ACTION(ACT_SWAP_HANDS, OP_SH_OFF) #endif /* ACTION_CODE_H */ diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/mshelp/placeholder.txt b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/mshelp/placeholder.txt index 486e9a4270..a34fd58dfa 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/mshelp/placeholder.txt +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/mshelp/placeholder.txt @@ -1 +1 @@ -Copy the Microsoft HV1 Docbook transform contents into this directory (i.e. with the XSLT files in the current folder). The HV1 transform proposal can be found at http://sourceforge.net/tracker/?func=detail&aid=3610290&group_id=21935&atid=373750 .
+Copy the Microsoft HV1 Docbook transform contents into this directory (i.e. with the XSLT files in the current folder). The HV1 transform proposal can be found at http://sourceforge.net/tracker/?func=detail&aid=3610290&group_id=21935&atid=373750 . diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/placeholder.txt b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/placeholder.txt index c017acfd75..dd69b7e0bd 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/placeholder.txt +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/placeholder.txt @@ -1 +1 @@ -Copy the Docbook XSLT docbook-xsl-1.78.1 release contents into this directory (i.e. with the root Docbook files in the current folder). The Docbook releases can be found at http://sourceforge.net/projects/docbook/files/docbook-xsl/ .
+Copy the Docbook XSLT docbook-xsl-1.78.1 release contents into this directory (i.e. with the root Docbook files in the current folder). The Docbook releases can be found at http://sourceforge.net/projects/docbook/files/docbook-xsl/ . diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_hv1_transform.xslt b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_hv1_transform.xslt index ee8a38340d..8aa4a9413e 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_hv1_transform.xslt +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_hv1_transform.xslt @@ -1,45 +1,45 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Docbook XML to Microsoft Help Viewer 1.0 transform file -->
-
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
-
- <xsl:import href="../Docbook/mshelp/docbook.xsl"/>
-
- <xsl:output method="xml" indent="no"/>
-
- <xsl:template match="emphasis[@role = 'keyword' or @role = 'keywordtype' or @role = 'keywordflow']">
- <span class="hl-keyword" style="color: #0079C1">
- <xsl:apply-templates/>
- </span>
- </xsl:template>
-
- <xsl:template match="emphasis[@role = 'stringliteral' or @role = 'charliteral']">
- <span class="hl-string" style="color: #800000">
- <xsl:apply-templates/>
- </span>
- </xsl:template>
-
- <xsl:template match="emphasis[@role = 'comment']">
- <em class="hl-comment" style="color: #008000">
- <xsl:apply-templates/>
- </em>
- </xsl:template>
-
- <xsl:template match="emphasis[@role = 'preprocessor']">
- <span class="hl-preprocessor" style="color: #A000A0">
- <xsl:apply-templates/>
- </span>
- </xsl:template>
-
- <xsl:template match="emphasis[@role = 'normal' and ancestor::programlisting]">
- <xsl:apply-templates />
- </xsl:template>
-
-</xsl:stylesheet>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Docbook XML to Microsoft Help Viewer 1.0 transform file --> + +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0"> + + <xsl:import href="../Docbook/mshelp/docbook.xsl"/> + + <xsl:output method="xml" indent="no"/> + + <xsl:template match="emphasis[@role = 'keyword' or @role = 'keywordtype' or @role = 'keywordflow']"> + <span class="hl-keyword" style="color: #0079C1"> + <xsl:apply-templates/> + </span> + </xsl:template> + + <xsl:template match="emphasis[@role = 'stringliteral' or @role = 'charliteral']"> + <span class="hl-string" style="color: #800000"> + <xsl:apply-templates/> + </span> + </xsl:template> + + <xsl:template match="emphasis[@role = 'comment']"> + <em class="hl-comment" style="color: #008000"> + <xsl:apply-templates/> + </em> + </xsl:template> + + <xsl:template match="emphasis[@role = 'preprocessor']"> + <span class="hl-preprocessor" style="color: #A000A0"> + <xsl:apply-templates/> + </span> + </xsl:template> + + <xsl:template match="emphasis[@role = 'normal' and ancestor::programlisting]"> + <xsl:apply-templates /> + </xsl:template> + +</xsl:stylesheet> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_studio_help_styling.css b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_studio_help_styling.css index 49eb7e9706..0b6ccbd8c1 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_studio_help_styling.css +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_studio_help_styling.css @@ -1,53 +1,53 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-.programlisting {
- display: block;
- margin-left: 15px;
- padding: 10px;
- background-color: #f4f4f4;
- border: 1px solid #aaaaaa;
- font-family: "Consolas", "Courier New", sans-serif;
- }
-
- code {
- background-color: #f4f4f4;
- font-family: "Consolas", "Courier New", sans-serif;
- }
-
-.note, .warning, .tip {
- display: block;
- margin-left: 15px;
- padding-left: 10px;
- padding-bottom: 5px;
- background-color: #f4f4f4;
- border: 1px solid #aaaaaa;
-}
-
-table {
- border: 1px solid #aaaaaa;
- border-collapse: collapse;
- margin-left: 15px;
- font-size: 10pt;
-}
-
-table thead {
- background-color: #f4f4f4;
-}
-
-table thead th {
- padding: 5px;
-}
-
-table tbody td {
- padding: 5px;
-}
-
-ul {
- padding-left: 20px;
-}
+/* + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +.programlisting { + display: block; + margin-left: 15px; + padding: 10px; + background-color: #f4f4f4; + border: 1px solid #aaaaaa; + font-family: "Consolas", "Courier New", sans-serif; + } + + code { + background-color: #f4f4f4; + font-family: "Consolas", "Courier New", sans-serif; + } + +.note, .warning, .tip { + display: block; + margin-left: 15px; + padding-left: 10px; + padding-bottom: 5px; + background-color: #f4f4f4; + border: 1px solid #aaaaaa; +} + +table { + border: 1px solid #aaaaaa; + border-collapse: collapse; + margin-left: 15px; + font-size: 10pt; +} + +table thead { + background-color: #f4f4f4; +} + +table thead th { + padding: 5px; +} + +table tbody td { + padding: 5px; +} + +ul { + padding-left: 20px; +} diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/[Content_Types].xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/[Content_Types].xml index 05ef8b6ba4..112d169942 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/[Content_Types].xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/[Content_Types].xml @@ -1,13 +1,13 @@ -<Types xmlns="http://schemas.openxmlformats.org/package/2006/content-types">
- <Default Extension="vsixmanifest" ContentType="text/xml"/>
- <Default Extension="cache" ContentType="text/xml"/>
- <Default Extension="png" ContentType="application/octet-stream"/>
- <Default Extension="txt" ContentType="text/plain"/>
- <Default Extension="xml" ContentType="text/xml"/>
- <Default Extension="zip" ContentType="application/octet-stream"/>
- <Default Extension="dll" ContentType="application/octet-stream" />
- <Default Extension="pkgdef" ContentType="text/plain" />
- <Default Extension="htm" ContentType="text/html" />
- <Default Extension="msha" ContentType="text/html" />
- <Default Extension="mshc" ContentType="application/octet-stream"/>
-</Types>
+<Types xmlns="http://schemas.openxmlformats.org/package/2006/content-types"> + <Default Extension="vsixmanifest" ContentType="text/xml"/> + <Default Extension="cache" ContentType="text/xml"/> + <Default Extension="png" ContentType="application/octet-stream"/> + <Default Extension="txt" ContentType="text/plain"/> + <Default Extension="xml" ContentType="text/xml"/> + <Default Extension="zip" ContentType="application/octet-stream"/> + <Default Extension="dll" ContentType="application/octet-stream" /> + <Default Extension="pkgdef" ContentType="text/plain" /> + <Default Extension="htm" ContentType="text/html" /> + <Default Extension="msha" ContentType="text/html" /> + <Default Extension="mshc" ContentType="application/octet-stream"/> +</Types> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/asf-manifest.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/asf-manifest.xml index 794fd689e1..bd969518a1 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/asf-manifest.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/asf-manifest.xml @@ -1,18 +1,18 @@ -<AsfContentProvider Version="1.0.0">
- <Identifier Id="0e160d5c-e331-48d9-850b-e0387912171b">
- <Org>FourWalledCubicle</Org>
- <ShortName>LUFA</ShortName>
- <Author>Dean Camera</Author>
- <Description/>
- <FollowFolderStructure>True</FollowFolderStructure>
- </Identifier>
- <AsfContent Type="zip" Path="contents.zip">
- <Content>
- <Version>0</Version>
- <HelpURL/>
- <Locator/>
- <DbXMLPath>content.xml.cache</DbXMLPath>
- <Description/>
- </Content>
- </AsfContent>
-</AsfContentProvider>
+<AsfContentProvider Version="1.0.0"> + <Identifier Id="0e160d5c-e331-48d9-850b-e0387912171b"> + <Org>FourWalledCubicle</Org> + <ShortName>LUFA</ShortName> + <Author>Dean Camera</Author> + <Description/> + <FollowFolderStructure>True</FollowFolderStructure> + </Identifier> + <AsfContent Type="zip" Path="contents.zip"> + <Content> + <Version>0</Version> + <HelpURL/> + <Locator/> + <DbXMLPath>content.xml.cache</DbXMLPath> + <Description/> + </Content> + </AsfContent> +</AsfContentProvider> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/extension.vsixmanifest b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/extension.vsixmanifest index ea6edeb258..8475017443 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/extension.vsixmanifest +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/extension.vsixmanifest @@ -1,33 +1,33 @@ -<?xml version="1.0" encoding="utf-8"?>
-
-<Vsix xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Version="1.0.0" xmlns="http://schemas.microsoft.com/developer/vsx-schema/2010">
- <Identifier Id="FourWalledCubicle.LUFA.0e160d5c-e331-48d9-850b-e0387912171b">
- <Name>LUFA Library</Name>
- <Author>Dean Camera</Author>
- <Version>0</Version>
- <MoreInfoUrl>http://www.lufa-lib.org</MoreInfoUrl>
- <Description xml:space="preserve">LUFA, the Lightweight USB Framework for AVRs.</Description>
-
- <License>License.txt</License>
- <Icon>LUFA_thumb.png</Icon>
- <PreviewImage>LUFA.png</PreviewImage>
-
- <SupportedProducts>
- <IsolatedShell Version="6.1">AtmelStudio</IsolatedShell>
- <IsolatedShell Version="6.2">AtmelStudio</IsolatedShell>
- </SupportedProducts>
-
- <SupportedFrameworkRuntimeEdition MinVersion="4.0" MaxVersion="4.5"/>
- <Locale>1033</Locale>
-
- <AllUsers>false</AllUsers>
- </Identifier>
-
- <References/>
-
- <Content>
- <VsPackage>LUFA.pkgdef</VsPackage>
- <CustomExtension Type="MSHelp">helpcontentsetup.msha</CustomExtension>
- <CustomExtension Type="asf-manifest">asf-manifest.xml</CustomExtension>
- </Content>
-</Vsix>
+<?xml version="1.0" encoding="utf-8"?> + +<Vsix xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Version="1.0.0" xmlns="http://schemas.microsoft.com/developer/vsx-schema/2010"> + <Identifier Id="FourWalledCubicle.LUFA.0e160d5c-e331-48d9-850b-e0387912171b"> + <Name>LUFA Library</Name> + <Author>Dean Camera</Author> + <Version>0</Version> + <MoreInfoUrl>http://www.lufa-lib.org</MoreInfoUrl> + <Description xml:space="preserve">LUFA, the Lightweight USB Framework for AVRs.</Description> + + <License>License.txt</License> + <Icon>LUFA_thumb.png</Icon> + <PreviewImage>LUFA.png</PreviewImage> + + <SupportedProducts> + <IsolatedShell Version="6.1">AtmelStudio</IsolatedShell> + <IsolatedShell Version="6.2">AtmelStudio</IsolatedShell> + </SupportedProducts> + + <SupportedFrameworkRuntimeEdition MinVersion="4.0" MaxVersion="4.5"/> + <Locale>1033</Locale> + + <AllUsers>false</AllUsers> + </Identifier> + + <References/> + + <Content> + <VsPackage>LUFA.pkgdef</VsPackage> + <CustomExtension Type="MSHelp">helpcontentsetup.msha</CustomExtension> + <CustomExtension Type="asf-manifest">asf-manifest.xml</CustomExtension> + </Content> +</Vsix> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/generate_caches.py b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/generate_caches.py index c51cff400d..eb4b71efdf 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/generate_caches.py +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/generate_caches.py @@ -1,38 +1,38 @@ -"""
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-"""
-
-import sys
-sys.path.append("ProjectGenerator")
-
-
-def show_message(message):
- print("[Project Generator] %s" % message)
- sys.stdout.flush()
-
-
-def main(lufa_root_path):
- try:
- from asf_avrstudio5_interface import PythonFacade
- except ImportError:
- print("Fatal Error: The ASF project generator is missing.")
- return 1
-
- p = PythonFacade(lufa_root_path)
-
- show_message("Checking database sanity...")
- p.check_extension_database_sanity(lufa_root_path)
-
- show_message("Building cache files...")
- p.generate_extension_cache_files(lufa_root_path)
-
- show_message("Cache files created.")
- return 0
-
-
-if __name__ == "__main__":
- sys.exit(main(sys.argv[1]))
+""" + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +""" + +import sys +sys.path.append("ProjectGenerator") + + +def show_message(message): + print("[Project Generator] %s" % message) + sys.stdout.flush() + + +def main(lufa_root_path): + try: + from asf_avrstudio5_interface import PythonFacade + except ImportError: + print("Fatal Error: The ASF project generator is missing.") + return 1 + + p = PythonFacade(lufa_root_path) + + show_message("Checking database sanity...") + p.check_extension_database_sanity(lufa_root_path) + + show_message("Building cache files...") + p.generate_extension_cache_files(lufa_root_path) + + show_message("Cache files created.") + return 0 + + +if __name__ == "__main__": + sys.exit(main(sys.argv[1])) diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa.xml index 28afdda587..86cfc0409d 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa.xml @@ -1,96 +1,96 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Atmel Studio framework integration file -->
-
-<lufa>
- <extension-container>
- <extension uuid="0e160d5c-e331-48d9-850b-e0387912171b" org="FourWalledCubicle" shortname="LUFA" version="" fullname="Lightweight USB Framework for AVRs (LUFA)">
- <author name="Dean Camera" website="http://www.lufa-lib.org/" email="dean@fourwalledcubicle.com"/>
- <description>Lightweight USB Framework for AVRs (LUFA), a USB software stack/framework.</description>
- <icon-image path="LUFA/DoxygenPages/Images/LUFA_thumb.png"/>
- <preview-image path="LUFA/DoxygenPages/Images/LUFA.png"/>
- <license caption="LUFA License" path="LUFA/License.txt"/>
- <release-notes caption="LUFA Information" url="http://www.lufa-lib.org"/>
- <online-help>
- <index-page caption="LUFA Documentation" url="http://www.lufa-lib.org/documentation/"/>
- <module-help-page scheme="append" baseurl="http://www.lufa-lib.org/documentation/"/>
- <module-guide-page scheme="append" baseurl="http://www.lufa-lib.org/documentation/"/>
- </online-help>
- <dependencies/>
- </extension>
- </extension-container>
-
- <asf>
- <device-alias-map name="lufa_avr8">
- <device-support value="at90usb82"/>
- <device-support value="atmega8u2"/>
- <device-support value="at90usb162"/>
- <device-support value="atmega16u2"/>
- <device-support value="atmega16u4"/>
- <device-support value="atmega32u2"/>
- <device-support value="atmega32u4"/>
- <device-support value="at90usb646"/>
- <device-support value="at90usb647"/>
- <device-support value="at90usb1286"/>
- <device-support value="at90usb1287"/>
- </device-alias-map>
-
- <device-alias-map name="lufa_xmega">
- <device-support value="atxmega16a4u"/>
- <device-support value="atxmega32a4u"/>
- <device-support value="atxmega64a4u"/>
- <device-support value="atxmega128a4u"/>
- <device-support value="atxmega64a3u"/>
- <device-support value="atxmega128a3u"/>
- <device-support value="atxmega192a3u"/>
- <device-support value="atxmega256a3u"/>
- <device-support value="atxmega256a3bu"/>
- <device-support value="atxmega128a1u"/>
- <device-support value="atxmega64b3"/>
- <device-support value="atxmega128b3"/>
- <device-support value="atxmega64b1"/>
- <device-support value="atxmega128b1"/>
- <device-support value="atxmega64c3"/>
- <device-support value="atxmega128c3"/>
- <!-- <device-support value="atxmega192c3"/> Wait for ASFP-3339 merge and release before enabling -->
- <device-support value="atxmega256c3"/>
- <device-support value="atxmega384c3"/>
- <device-support value="atxmega16c4"/>
- </device-alias-map>
-
- <device-alias-map name="lufa_uc3">
- <device-support value="at32uc3a364"/>
- <device-support value="at32uc3a364s"/>
- <device-support value="at32uc3a464"/>
- <device-support value="at32uc3a464s"/>
- <device-support value="at32uc3b064"/>
- <device-support value="at32uc3b164"/>
- <device-support value="at32uc3a0128"/>
- <device-support value="at32uc3a1128"/>
- <device-support value="at32uc3a3128"/>
- <device-support value="at32uc3a3128s"/>
- <device-support value="at32uc3a4128"/>
- <device-support value="at32uc3a4128s"/>
- <device-support value="at32uc3b0128"/>
- <device-support value="at32uc3b1128"/>
- <device-support value="at32uc3a0256"/>
- <device-support value="at32uc3a1256"/>
- <device-support value="at32uc3a3256"/>
- <device-support value="at32uc3a3256s"/>
- <device-support value="at32uc3a4256"/>
- <device-support value="at32uc3a4256s"/>
- <device-support value="at32uc3b0256"/>
- <device-support value="at32uc3b1256"/>
- <device-support value="at32uc3a0512"/>
- <device-support value="at32uc3a1512"/>
- <device-support value="at32uc3b0512"/>
- <device-support value="at32uc3b1512"/>
- </device-alias-map>
- </asf>
-</lufa>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Atmel Studio framework integration file --> + +<lufa> + <extension-container> + <extension uuid="0e160d5c-e331-48d9-850b-e0387912171b" org="FourWalledCubicle" shortname="LUFA" version="" fullname="Lightweight USB Framework for AVRs (LUFA)"> + <author name="Dean Camera" website="http://www.lufa-lib.org/" email="dean@fourwalledcubicle.com"/> + <description>Lightweight USB Framework for AVRs (LUFA), a USB software stack/framework.</description> + <icon-image path="LUFA/DoxygenPages/Images/LUFA_thumb.png"/> + <preview-image path="LUFA/DoxygenPages/Images/LUFA.png"/> + <license caption="LUFA License" path="LUFA/License.txt"/> + <release-notes caption="LUFA Information" url="http://www.lufa-lib.org"/> + <online-help> + <index-page caption="LUFA Documentation" url="http://www.lufa-lib.org/documentation/"/> + <module-help-page scheme="append" baseurl="http://www.lufa-lib.org/documentation/"/> + <module-guide-page scheme="append" baseurl="http://www.lufa-lib.org/documentation/"/> + </online-help> + <dependencies/> + </extension> + </extension-container> + + <asf> + <device-alias-map name="lufa_avr8"> + <device-support value="at90usb82"/> + <device-support value="atmega8u2"/> + <device-support value="at90usb162"/> + <device-support value="atmega16u2"/> + <device-support value="atmega16u4"/> + <device-support value="atmega32u2"/> + <device-support value="atmega32u4"/> + <device-support value="at90usb646"/> + <device-support value="at90usb647"/> + <device-support value="at90usb1286"/> + <device-support value="at90usb1287"/> + </device-alias-map> + + <device-alias-map name="lufa_xmega"> + <device-support value="atxmega16a4u"/> + <device-support value="atxmega32a4u"/> + <device-support value="atxmega64a4u"/> + <device-support value="atxmega128a4u"/> + <device-support value="atxmega64a3u"/> + <device-support value="atxmega128a3u"/> + <device-support value="atxmega192a3u"/> + <device-support value="atxmega256a3u"/> + <device-support value="atxmega256a3bu"/> + <device-support value="atxmega128a1u"/> + <device-support value="atxmega64b3"/> + <device-support value="atxmega128b3"/> + <device-support value="atxmega64b1"/> + <device-support value="atxmega128b1"/> + <device-support value="atxmega64c3"/> + <device-support value="atxmega128c3"/> + <!-- <device-support value="atxmega192c3"/> Wait for ASFP-3339 merge and release before enabling --> + <device-support value="atxmega256c3"/> + <device-support value="atxmega384c3"/> + <device-support value="atxmega16c4"/> + </device-alias-map> + + <device-alias-map name="lufa_uc3"> + <device-support value="at32uc3a364"/> + <device-support value="at32uc3a364s"/> + <device-support value="at32uc3a464"/> + <device-support value="at32uc3a464s"/> + <device-support value="at32uc3b064"/> + <device-support value="at32uc3b164"/> + <device-support value="at32uc3a0128"/> + <device-support value="at32uc3a1128"/> + <device-support value="at32uc3a3128"/> + <device-support value="at32uc3a3128s"/> + <device-support value="at32uc3a4128"/> + <device-support value="at32uc3a4128s"/> + <device-support value="at32uc3b0128"/> + <device-support value="at32uc3b1128"/> + <device-support value="at32uc3a0256"/> + <device-support value="at32uc3a1256"/> + <device-support value="at32uc3a3256"/> + <device-support value="at32uc3a3256s"/> + <device-support value="at32uc3a4256"/> + <device-support value="at32uc3a4256s"/> + <device-support value="at32uc3b0256"/> + <device-support value="at32uc3b1256"/> + <device-support value="at32uc3a0512"/> + <device-support value="at32uc3a1512"/> + <device-support value="at32uc3b0512"/> + <device-support value="at32uc3b1512"/> + </device-alias-map> + </asf> +</lufa> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_common.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_common.xml index 9e17b188be..c2ef7af4c7 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_common.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_common.xml @@ -1,34 +1,34 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Atmel Studio framework integration file -->
-
-<lufa>
- <asf>
- <module type="service" id="lufa.common" caption="LUFA Common Infrastructure">
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <info type="gui-flag" value="hidden"/>
- <build type="doxygen-entry-point" value="Group_Common"/>
-
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Version.h"/>
- <build type="distribute" subtype="license" value="License.txt"/>
-
- <build type="header-file" subtype="api" value="Common/Common.h"/>
- <build type="header-file" value="Common/Architectures.h"/>
- <build type="header-file" value="Common/ArchitectureSpecific.h"/>
- <build type="header-file" value="Common/Attributes.h"/>
- <build type="header-file" value="Common/BoardTypes.h"/>
- <build type="header-file" value="Common/CompilerSpecific.h"/>
- <build type="header-file" value="Common/Endianness.h"/>
- </module>
- </asf>
-</lufa>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Atmel Studio framework integration file --> + +<lufa> + <asf> + <module type="service" id="lufa.common" caption="LUFA Common Infrastructure"> + <device-support-alias value="lufa_avr8"/> + <device-support-alias value="lufa_xmega"/> + <device-support-alias value="lufa_uc3"/> + + <info type="gui-flag" value="hidden"/> + <build type="doxygen-entry-point" value="Group_Common"/> + + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Version.h"/> + <build type="distribute" subtype="license" value="License.txt"/> + + <build type="header-file" subtype="api" value="Common/Common.h"/> + <build type="header-file" value="Common/Architectures.h"/> + <build type="header-file" value="Common/ArchitectureSpecific.h"/> + <build type="header-file" value="Common/Attributes.h"/> + <build type="header-file" value="Common/BoardTypes.h"/> + <build type="header-file" value="Common/CompilerSpecific.h"/> + <build type="header-file" value="Common/Endianness.h"/> + </module> + </asf> +</lufa> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board.xml index 3677d20036..e150aa6458 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board.xml @@ -1,114 +1,114 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Atmel Studio framework integration file -->
-
-<lufa>
- <asf>
- <board id="lufa.boards.dummy.avr8" vendor="LUFA" caption="AVR8 Architecture">
- <device-support value="mega"/>
-
- <require idref="lufa.drivers.board"/>
- <require idref="lufa.drivers.board.info"/>
- </board>
-
- <board id="lufa.boards.dummy.xmega" vendor="LUFA" caption="XMEGA Architecture">
- <device-support value="xmega"/>
-
- <require idref="lufa.drivers.board"/>
- <require idref="lufa.drivers.board.info"/>
- </board>
-
- <board id="lufa.boards.dummy.uc3" vendor="LUFA" caption="UC3 Architecture">
- <device-support value="uc3"/>
-
- <require idref="lufa.drivers.board"/>
- <require idref="lufa.drivers.board.info"/>
- </board>
-
- <module type="driver" id="lufa.drivers.board.info" caption="LUFA Board Hardware Information Driver">
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_BoardInfo"/>
-
- <require idref="lufa.common"/>
-
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Board/Board.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board.leds" caption="LUFA Board LED Driver">
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_LEDs"/>
-
- <require idref="lufa.common"/>
-
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Board/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board.buttons" caption="LUFA Board Buttons Driver">
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_Buttons"/>
-
- <require idref="lufa.common"/>
-
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Board/Buttons.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board.dataflash" caption="LUFA Board Dataflash Driver">
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_Dataflash"/>
-
- <require idref="lufa.common"/>
-
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Board/Dataflash.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board.joystick" caption="LUFA Board Joystick Driver">
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_Joystick"/>
-
- <require idref="lufa.common"/>
-
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Board/Joystick.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board.temperature" caption="LUFA Board Temperature Sensor Driver">
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_Temperature"/>
-
- <require idref="lufa.common"/>
- <require idref="lufa.drivers.peripheral.adc"/>
-
- <build type="c-source" value="Drivers/Board/Temperature.c"/>
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Board/Temperature.h"/>
- </module>
- </asf>
-</lufa>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Atmel Studio framework integration file --> + +<lufa> + <asf> + <board id="lufa.boards.dummy.avr8" vendor="LUFA" caption="AVR8 Architecture"> + <device-support value="mega"/> + + <require idref="lufa.drivers.board"/> + <require idref="lufa.drivers.board.info"/> + </board> + + <board id="lufa.boards.dummy.xmega" vendor="LUFA" caption="XMEGA Architecture"> + <device-support value="xmega"/> + + <require idref="lufa.drivers.board"/> + <require idref="lufa.drivers.board.info"/> + </board> + + <board id="lufa.boards.dummy.uc3" vendor="LUFA" caption="UC3 Architecture"> + <device-support value="uc3"/> + + <require idref="lufa.drivers.board"/> + <require idref="lufa.drivers.board.info"/> + </board> + + <module type="driver" id="lufa.drivers.board.info" caption="LUFA Board Hardware Information Driver"> + <device-support-alias value="lufa_avr8"/> + <device-support-alias value="lufa_xmega"/> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_BoardInfo"/> + + <require idref="lufa.common"/> + + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Board/Board.h"/> + </module> + + <module type="driver" id="lufa.drivers.board.leds" caption="LUFA Board LED Driver"> + <device-support-alias value="lufa_avr8"/> + <device-support-alias value="lufa_xmega"/> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_LEDs"/> + + <require idref="lufa.common"/> + + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Board/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board.buttons" caption="LUFA Board Buttons Driver"> + <device-support-alias value="lufa_avr8"/> + <device-support-alias value="lufa_xmega"/> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_Buttons"/> + + <require idref="lufa.common"/> + + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Board/Buttons.h"/> + </module> + + <module type="driver" id="lufa.drivers.board.dataflash" caption="LUFA Board Dataflash Driver"> + <device-support-alias value="lufa_avr8"/> + <device-support-alias value="lufa_xmega"/> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_Dataflash"/> + + <require idref="lufa.common"/> + + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Board/Dataflash.h"/> + </module> + + <module type="driver" id="lufa.drivers.board.joystick" caption="LUFA Board Joystick Driver"> + <device-support-alias value="lufa_avr8"/> + <device-support-alias value="lufa_xmega"/> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_Joystick"/> + + <require idref="lufa.common"/> + + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Board/Joystick.h"/> + </module> + + <module type="driver" id="lufa.drivers.board.temperature" caption="LUFA Board Temperature Sensor Driver"> + <device-support-alias value="lufa_avr8"/> + <device-support-alias value="lufa_xmega"/> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_Temperature"/> + + <require idref="lufa.common"/> + <require idref="lufa.drivers.peripheral.adc"/> + + <build type="c-source" value="Drivers/Board/Temperature.c"/> + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Board/Temperature.h"/> + </module> + </asf> +</lufa> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board_names.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board_names.xml index 4b099920b7..ab7e03e4e9 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board_names.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board_names.xml @@ -1,853 +1,853 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Atmel Studio framework integration file -->
-
-<lufa>
- <asf>
- <select-by-config id="lufa.drivers.board" name="lufa.drivers.board.name" default="none" caption="LUFA Board Support">
- <info type="description" value="summary">
- Board hardware (LEDs, Buttons, etc.) drivers for the preconfigured LUFA boards. Note that only the boards
- compatible with the currently selected device will be shown.
-
- To disable all hardware drivers silently, use NONE. To supply customer drivers, use USER (see manual).
- </info>
-
- <module type="driver" id="lufa.drivers.board#none" caption="Board Support - None">
- <device-support value="avr"/>
- <build type="define" name="BOARD" value="BOARD_NONE"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#user" caption="Board Support - User Supplied">
- <device-support value="avr"/>
- <build type="define" name="BOARD" value="BOARD_USER"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#adafruit_u4" caption="Board Support - ADAFRUITU4">
- <build type="doxygen-entry-point" value="Group_BoardInfo_ADAFRUITU4"/>
-
- <device-support value="atmega32u4"/>
- <build type="define" name="BOARD" value="BOARD_ADAFRUITU4"/>
-
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/ADAFRUITU4/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/ADAFRUITU4/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#atavrusbrf01" caption="Board Support - ATAVRUSBRF01">
- <build type="doxygen-entry-point" value="Group_BoardInfo_ATAVRUSBRF01"/>
-
- <device-support value="at90usb1287"/>
- <build type="define" name="BOARD" value="BOARD_ATAVRUSBRF01"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#benito" caption="Board Support - BENITO">
- <build type="doxygen-entry-point" value="Group_BoardInfo_BENITO"/>
-
- <device-support value="at90usb162"/>
- <build type="define" name="BOARD" value="BOARD_BENITO"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/BENITO/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/BENITO/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/BENITO/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#big_multio" caption="Board Support - BIGMULTIO">
- <build type="doxygen-entry-point" value="Group_BoardInfo_BIGMULTIO"/>
-
- <device-support value="atmega32u4"/>
- <build type="define" name="BOARD" value="BOARD_BIGMULTIO"/>
-
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/BIGMULTIO/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/BIGMULTIO/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#blackcat" caption="Board Support - BLACKCAT">
- <build type="doxygen-entry-point" value="Group_BoardInfo_BLACKCAT"/>
-
- <device-support value="at90usb162"/>
- <build type="define" name="BOARD" value="BOARD_BLACKCAT"/>
-
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/BLACKCAT/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/BLACKCAT/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#bui" caption="Board Support - BUI">
- <build type="doxygen-entry-point" value="Group_BoardInfo_BUI"/>
-
- <device-support value="at90usb646"/>
- <build type="define" name="BOARD" value="BOARD_BUI"/>
-
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/BUI/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/BUI/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#bumbleb" caption="Board Support - BUMBLEB">
- <build type="doxygen-entry-point" value="Group_BoardInfo_BUMBLEB"/>
-
- <device-support value="at90usb162"/>
- <build type="define" name="BOARD" value="BOARD_BUMBLEB"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
- <require idref="lufa.drivers.board.joystick"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Joystick.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#culv3" caption="Board Support - CULV3">
- <build type="doxygen-entry-point" value="Group_BoardInfo_CULV3"/>
-
- <device-support value="atmega32u4"/>
- <build type="define" name="BOARD" value="BOARD_CULV3"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/CULV3/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/CULV3/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/CULV3/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#duce" caption="Board Support - DUCE">
- <build type="doxygen-entry-point" value="Group_BoardInfo_DUCE"/>
-
- <device-support value="atmega32u2"/>
- <build type="define" name="BOARD" value="BOARD_DUCE"/>
-
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/DUCE/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/DUCE/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#evk527" caption="Board Support - EVK527">
- <build type="doxygen-entry-point" value="Group_BoardInfo_EVK527"/>
-
- <device-support value="atmega32u4"/>
- <build type="define" name="BOARD" value="BOARD_EVK527"/>
-
- <require idref="lufa.drivers.misc.at45db321c"/>
- <require idref="lufa.drivers.peripheral.spi"/>
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.dataflash"/>
- <require idref="lufa.drivers.board.joystick"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/EVK527/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/EVK527/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/EVK527/Dataflash.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/EVK527/Joystick.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/EVK527/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#jm_db_u2" caption="Board Support - JMDBU2">
- <build type="doxygen-entry-point" value="Group_BoardInfo_JMDBU2"/>
-
- <device-support value="atmega32u2"/>
- <build type="define" name="BOARD" value="BOARD_JMDBU2"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/JMDBU2/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/JMDBU2/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/JMDBU2/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#leonardo" caption="Board Support - LEONARDO">
- <build type="doxygen-entry-point" value="Group_BoardInfo_LEONARDO"/>
-
- <device-support value="atmega32u4"/>
- <build type="define" name="BOARD" value="BOARD_LEONARDO"/>
-
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/LEONARDO/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/LEONARDO/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#maximus" caption="Board Support - MAXIMUS">
- <build type="doxygen-entry-point" value="Group_BoardInfo_MAXIMUS"/>
-
- <device-support value="at90usb162"/>
- <build type="define" name="BOARD" value="BOARD_MAXIMUS"/>
-
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/MAXIMUS/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MAXIMUS/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#micropendous_32u2" caption="Board Support - MICROPENDOUS_32U2">
- <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_32U2"/>
-
- <device-support value="atmega32u2"/>
- <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_32U2"/>
-
- <require idref="lufa.drivers.board.leds"/>
- <require idref="lufa.drivers.board.buttons"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#micropendous_a" caption="Board Support - MICROPENDOUS_A">
- <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_A"/>
-
- <device-support value="at90usb1287"/>
- <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_A"/>
-
- <require idref="lufa.drivers.board.buttons"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#micropendous_1" caption="Board Support - MICROPENDOUS_1">
- <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_1"/>
-
- <device-support value="at90usb162"/>
- <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_1"/>
-
- <require idref="lufa.drivers.board.buttons"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#micropendous_2" caption="Board Support - MICROPENDOUS_2">
- <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_2"/>
-
- <device-support value="atmega32u4"/>
- <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_2"/>
-
- <require idref="lufa.drivers.board.buttons"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#micropendous_3" caption="Board Support - MICROPENDOUS_3">
- <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_3"/>
-
- <device-support value="at90usb1287"/>
- <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_3"/>
-
- <require idref="lufa.drivers.board.buttons"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#micropendous_4" caption="Board Support - MICROPENDOUS_4">
- <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_4"/>
-
- <device-support value="at90usb1287"/>
- <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_4"/>
-
- <require idref="lufa.drivers.board.buttons"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#micropendous_dip" caption="Board Support - MICROPENDOUS_DIP">
- <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_DIP"/>
-
- <device-support value="at90usb1287"/>
- <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_DIP"/>
-
- <require idref="lufa.drivers.board.buttons"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#micropendous_rev1" caption="Board Support - MICROPENDOUS_REV1">
- <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_REV1"/>
-
- <device-support value="at90usb1287"/>
- <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_REV1"/>
-
- <require idref="lufa.drivers.board.leds"/>
- <require idref="lufa.drivers.board.buttons"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#micropendous_rev2" caption="Board Support - MICROPENDOUS_REV2">
- <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_REV2"/>
-
- <device-support value="at90usb1287"/>
- <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_REV2"/>
-
- <require idref="lufa.drivers.board.leds"/>
- <require idref="lufa.drivers.board.buttons"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#microsin_162" caption="Board Support - MICROSIN162">
- <build type="doxygen-entry-point" value="Group_BoardInfo_MICROSIN162"/>
-
- <device-support value="atmega162"/>
- <build type="define" name="BOARD" value="BOARD_MICROSIN162"/>
-
- <require idref="lufa.drivers.board.leds"/>
- <require idref="lufa.drivers.board.buttons"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/LEDs.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/Buttons.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#minimus" caption="Board Support - MINIMUS">
- <build type="doxygen-entry-point" value="Group_BoardInfo_MINIMUS"/>
-
- <device-support value="atmega32u2"/>
- <build type="define" name="BOARD" value="BOARD_MINIMUS"/>
-
- <require idref="lufa.drivers.board.leds"/>
- <require idref="lufa.drivers.board.buttons"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/MINIMUS/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MINIMUS/LEDs.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MINIMUS/Buttons.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#multio" caption="Board Support - MULTIO">
- <build type="doxygen-entry-point" value="Group_BoardInfo_MULTIO"/>
-
- <device-support value="at90usb162"/>
- <build type="define" name="BOARD" value="BOARD_MULTIO"/>
-
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/MULTIO/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MULTIO/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#olimex_162" caption="Board Support - OLIMEX162">
- <build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEX162"/>
-
- <device-support value="at90usb162"/>
- <build type="define" name="BOARD" value="BOARD_OLIMEX162"/>
-
- <require idref="lufa.drivers.board.leds"/>
- <require idref="lufa.drivers.board.buttons"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/LEDs.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/Buttons.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#olimex_32u4" caption="Board Support - OLIMEX32U4">
- <build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEX32U4"/>
-
- <device-support value="atmega32u4"/>
- <build type="define" name="BOARD" value="BOARD_OLIMEX32U4"/>
-
- <require idref="lufa.drivers.board.leds"/>
- <require idref="lufa.drivers.board.buttons"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/LEDs.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/Buttons.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#olimex_isp_mkii" caption="Board Support - OLIMEXISPMK2">
- <build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEXISPMK2"/>
-
- <device-support value="at90usb162"/>
- <build type="define" name="BOARD" value="BOARD_OLIMEXISPMK2"/>
-
- <require idref="lufa.drivers.board.leds"/>
- <require idref="lufa.drivers.board.buttons"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/LEDs.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/Buttons.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#olimex_t32u4" caption="Board Support - OLIMEX_T32U4">
- <build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEXT32U4"/>
-
- <device-support value="atmega32u4"/>
- <build type="define" name="BOARD" value="BOARD_OLIMEXT32U4"/>
-
- <require idref="lufa.drivers.board.leds"/>
- <require idref="lufa.drivers.board.buttons"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/LEDs.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/Buttons.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#rzusbstick" caption="Board Support - RZUSBSTICK">
- <build type="doxygen-entry-point" value="Group_BoardInfo_RZUSBSTICK"/>
-
- <device-support value="at90usb1287"/>
- <build type="define" name="BOARD" value="BOARD_RZUSBSTICK"/>
-
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/RZUSBSTICK/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/RZUSBSTICK/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#sparkfun_8u2" caption="Board Support - SPARKFUN8U2">
- <build type="doxygen-entry-point" value="Group_BoardInfo_SPARKFUN8U2"/>
-
- <device-support value="atmega8u2"/>
- <build type="define" name="BOARD" value="BOARD_SPARKFUN8U2"/>
-
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/SPARKFUN8U2/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#stk525" caption="Board Support - STK525">
- <build type="doxygen-entry-point" value="Group_BoardInfo_STK525"/>
-
- <device-support value="at90usb1287"/>
- <device-support value="at90usb1286"/>
- <device-support value="at90usb647"/>
- <device-support value="at90usb646"/>
- <build type="define" name="BOARD" value="BOARD_STK525"/>
-
- <require idref="lufa.drivers.misc.at45db321c"/>
- <require idref="lufa.drivers.peripheral.spi"/>
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.dataflash"/>
- <require idref="lufa.drivers.board.joystick"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/STK525/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/STK525/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/STK525/Dataflash.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/STK525/Joystick.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/STK525/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#stk526" caption="Board Support - STK526">
- <build type="doxygen-entry-point" value="Group_BoardInfo_STK526"/>
-
- <device-support value="at90usb162"/>
- <device-support value="at90usb82"/>
- <device-support value="atmega32u2"/>
- <device-support value="atmega16u2"/>
- <device-support value="atmega8u2"/>
- <build type="define" name="BOARD" value="BOARD_STK526"/>
-
- <require idref="lufa.drivers.misc.at45db642d"/>
- <require idref="lufa.drivers.peripheral.spi"/>
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.dataflash"/>
- <require idref="lufa.drivers.board.joystick"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/STK526/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/STK526/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/STK526/Dataflash.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/STK526/Joystick.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/STK526/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#teensy" caption="Board Support - TEENSY">
- <build type="doxygen-entry-point" value="Group_BoardInfo_TEENSY"/>
-
- <device-support value="at90usb162"/>
- <build type="define" name="BOARD" value="BOARD_TEENSY"/>
-
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/TEENSY/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/TEENSY/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#teensy2" caption="Board Support - TEENSY2">
- <build type="doxygen-entry-point" value="Group_BoardInfo_TEENSY2"/>
-
- <device-support value="at90usb646"/>
- <build type="define" name="BOARD" value="BOARD_TEENSY2"/>
-
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/TEENSY/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/TEENSY/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#tul" caption="Board Support - TUL">
- <build type="doxygen-entry-point" value="Group_BoardInfo_TUL"/>
-
- <device-support value="atmega32u4"/>
- <build type="define" name="BOARD" value="BOARD_TUL"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/TUL/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/TUL/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/TUL/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#udip" caption="Board Support - UDIP">
- <build type="doxygen-entry-point" value="Group_BoardInfo_UDIP"/>
-
- <device-support value="atmega32u2"/>
- <build type="define" name="BOARD" value="BOARD_UDIP"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/UDIP/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/UDIP/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/UDIP/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#uno" caption="Board Support - UNO">
- <build type="doxygen-entry-point" value="Group_BoardInfo_UNO"/>
-
- <device-support value="atmega8u2"/>
- <device-support value="atmega16u2"/>
- <build type="define" name="BOARD" value="BOARD_UNO"/>
-
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/UNO/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/UNO/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#usb2ax" caption="Board Support - USB2AX">
- <build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX"/>
-
- <device-support value="atmega32u2"/>
- <build type="define" name="BOARD" value="BOARD_USB2AX"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#usb2ax_v3" caption="Board Support - USB2AX_V3">
- <build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX_V3"/>
-
- <device-support value="atmega32u2"/>
- <build type="define" name="BOARD" value="BOARD_USB2AX_V3"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#usb2ax_v3_1" caption="Board Support - USB2AX_V31">
- <build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX_V31"/>
-
- <device-support value="atmega32u2"/>
- <build type="define" name="BOARD" value="BOARD_USB2AX_V31"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#usbfoo" caption="Board Support - USBFOO">
- <build type="doxygen-entry-point" value="Group_BoardInfo_USBFOO"/>
-
- <device-support value="atmega162"/>
- <build type="define" name="BOARD" value="BOARD_USBFOO"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/USBFOO/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/USBFOO/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/USBFOO/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#usbkey" caption="Board Support - USBKEY">
- <build type="doxygen-entry-point" value="Group_BoardInfo_USBKEY"/>
-
- <device-support value="at90usb1287"/>
- <build type="define" name="BOARD" value="BOARD_USBKEY"/>
-
- <require idref="lufa.drivers.misc.at45db642d"/>
- <require idref="lufa.drivers.peripheral.spi"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.dataflash"/>
- <require idref="lufa.drivers.board.joystick"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/USBKEY/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/USBKEY/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/USBKEY/Dataflash.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/USBKEY/Joystick.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/USBKEY/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#usbtiny_mkii" caption="Board Support - USBTINYMKII">
- <build type="doxygen-entry-point" value="Group_BoardInfo_USBTINYMKII"/>
-
- <device-support value="at90usb162"/>
- <build type="define" name="BOARD" value="BOARD_USBTINYMKII"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/LEDs.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#xplain_rev1" caption="Board Support - XPLAIN (HW Rev 1)">
- <build type="doxygen-entry-point" value="Group_BoardInfo_XPLAIN_REV1"/>
-
- <device-support value="at90usb1287"/>
-
- <require idref="lufa.drivers.misc.at45db642d"/>
- <require idref="lufa.drivers.peripheral.spi"/>
- <require idref="lufa.drivers.board.dataflash"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Dataflash.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/XPLAIN/LEDs.h"/>
-
- <build type="define" name="BOARD" value="BOARD_XPLAIN_REV1"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#xplain" caption="Board Support - XPLAIN (HW Rev 2+)">
- <build type="doxygen-entry-point" value="Group_BoardInfo_XPLAIN"/>
-
- <device-support value="at90usb1287"/>
-
- <require idref="lufa.drivers.misc.at45db642d"/>
- <require idref="lufa.drivers.peripheral.spi"/>
- <require idref="lufa.drivers.board.dataflash"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Dataflash.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/XPLAIN/LEDs.h"/>
-
- <build type="define" name="BOARD" value="BOARD_XPLAIN"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#a3bu_xplained" caption="Board Support - A3BU_XPLAINED">
- <build type="doxygen-entry-point" value="Group_BoardInfo_A3BU_XPLAINED"/>
-
- <device-support value="atxmega256a3bu"/>
-
- <require idref="lufa.drivers.misc.at45db642d"/>
- <require idref="lufa.drivers.peripheral.usart_spi"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.dataflash"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Board.h"/>
- <build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h"/>
- <build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h"/>
-
- <build type="define" name="BOARD" value="BOARD_A3BU_XPLAINED"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#b1_xplained" caption="Board Support - B1_XPLAINED">
- <build type="doxygen-entry-point" value="Group_BoardInfo_B1_XPLAINED"/>
-
- <device-support value="atxmega128b1"/>
-
- <require idref="lufa.drivers.misc.at45db642d"/>
- <require idref="lufa.drivers.peripheral.usart_spi"/>
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.dataflash"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Board.h"/>
- <build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h"/>
- <build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h"/>
-
- <build type="define" name="BOARD" value="BOARD_B1_XPLAINED"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#evk1100" caption="Board Support - EVK1100">
- <build type="doxygen-entry-point" value="Group_BoardInfo_EVK1100"/>
-
- <device-support value="at32uc3a0512"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.joystick"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/UC3/EVK1100/Board.h"/>
- <build type="header-file" value="Drivers/Board/UC3/EVK1100/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/UC3/EVK1100/Joystick.h"/>
- <build type="header-file" value="Drivers/Board/UC3/EVK1100/LEDs.h"/>
-
- <build type="define" name="BOARD" value="BOARD_EVK1100"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#evk1101" caption="Board Support - EVK1101">
- <build type="doxygen-entry-point" value="Group_BoardInfo_EVK1101"/>
-
- <device-support value="at32uc3b0256"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.joystick"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/UC3/EVK1101/Board.h"/>
- <build type="header-file" value="Drivers/Board/UC3/EVK1101/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/UC3/EVK1101/Joystick.h"/>
- <build type="header-file" value="Drivers/Board/UC3/EVK1101/LEDs.h"/>
-
- <build type="define" name="BOARD" value="BOARD_EVK1101"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#evk1104" caption="Board Support - EVK1104">
- <build type="doxygen-entry-point" value="Group_BoardInfo_EVK1104"/>
-
- <device-support value="at32uc3a3256"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/UC3/EVK1104/Board.h"/>
- <build type="header-file" value="Drivers/Board/UC3/EVK1104/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/UC3/EVK1104/LEDs.h"/>
-
- <build type="define" name="BOARD" value="BOARD_EVK1104"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#uc3a3_xplained" caption="Board Support - UC3A3_XPLAINED">
- <build type="doxygen-entry-point" value="Group_BoardInfo_UC3_A3_XPLAINED"/>
-
- <device-support value="at32uc3a3256"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/Board.h"/>
- <build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/LEDs.h"/>
-
- <build type="define" name="BOARD" value="BOARD_UC3A3_XPLAINED"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#stange_isp" caption="Board Support - STANGE_ISP">
- <build type="doxygen-entry-point" value="Group_BoardInfo_STANGE_ISP"/>
-
- <device-support value="at90usb162"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/LEDs.h"/>
-
- <build type="define" name="BOARD" value="BOARD_STANGE_ISP"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#c3_xplained" caption="Board Support - C3_XPLAINED">
- <build type="doxygen-entry-point" value="Group_BoardInfo_C3_XPLAINED"/>
-
- <device-support value="atxmega384c3"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/Board.h"/>
- <build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/LEDs.h"/>
-
- <build type="define" name="BOARD" value="BOARD_C3_XPLAINED"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#u2s" caption="Board Support - U2S">
- <build type="doxygen-entry-point" value="Group_BoardInfo_U2S"/>
-
- <device-support value="atmega32u2"/>
-
- <require idref="lufa.drivers.board.buttons"/>
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/U2S/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/U2S/Buttons.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/U2S/LEDs.h"/>
-
- <build type="define" name="BOARD" value="BOARD_U2S"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#yun" caption="Board Support - YUN">
- <build type="doxygen-entry-point" value="Group_BoardInfo_YUN"/>
-
- <device-support value="atmega32u4"/>
-
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/YUN/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/YUN/LEDs.h"/>
-
- <build type="define" name="BOARD" value="BOARD_YUN"/>
- </module>
-
- <module type="driver" id="lufa.drivers.board#yun" caption="Board Support - MICRO">
- <build type="doxygen-entry-point" value="Group_BoardInfo_MICRO"/>
-
- <device-support value="atmega32u4"/>
-
- <require idref="lufa.drivers.board.leds"/>
-
- <build type="header-file" value="Drivers/Board/AVR8/MICRO/Board.h"/>
- <build type="header-file" value="Drivers/Board/AVR8/MICRO/LEDs.h"/>
-
- <build type="define" name="BOARD" value="BOARD_MICRO"/>
- </module>
- </select-by-config>
- </asf>
-</lufa>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Atmel Studio framework integration file --> + +<lufa> + <asf> + <select-by-config id="lufa.drivers.board" name="lufa.drivers.board.name" default="none" caption="LUFA Board Support"> + <info type="description" value="summary"> + Board hardware (LEDs, Buttons, etc.) drivers for the preconfigured LUFA boards. Note that only the boards + compatible with the currently selected device will be shown. + + To disable all hardware drivers silently, use NONE. To supply customer drivers, use USER (see manual). + </info> + + <module type="driver" id="lufa.drivers.board#none" caption="Board Support - None"> + <device-support value="avr"/> + <build type="define" name="BOARD" value="BOARD_NONE"/> + </module> + + <module type="driver" id="lufa.drivers.board#user" caption="Board Support - User Supplied"> + <device-support value="avr"/> + <build type="define" name="BOARD" value="BOARD_USER"/> + </module> + + <module type="driver" id="lufa.drivers.board#adafruit_u4" caption="Board Support - ADAFRUITU4"> + <build type="doxygen-entry-point" value="Group_BoardInfo_ADAFRUITU4"/> + + <device-support value="atmega32u4"/> + <build type="define" name="BOARD" value="BOARD_ADAFRUITU4"/> + + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/ADAFRUITU4/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/ADAFRUITU4/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#atavrusbrf01" caption="Board Support - ATAVRUSBRF01"> + <build type="doxygen-entry-point" value="Group_BoardInfo_ATAVRUSBRF01"/> + + <device-support value="at90usb1287"/> + <build type="define" name="BOARD" value="BOARD_ATAVRUSBRF01"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#benito" caption="Board Support - BENITO"> + <build type="doxygen-entry-point" value="Group_BoardInfo_BENITO"/> + + <device-support value="at90usb162"/> + <build type="define" name="BOARD" value="BOARD_BENITO"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/BENITO/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/BENITO/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/BENITO/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#big_multio" caption="Board Support - BIGMULTIO"> + <build type="doxygen-entry-point" value="Group_BoardInfo_BIGMULTIO"/> + + <device-support value="atmega32u4"/> + <build type="define" name="BOARD" value="BOARD_BIGMULTIO"/> + + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/BIGMULTIO/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/BIGMULTIO/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#blackcat" caption="Board Support - BLACKCAT"> + <build type="doxygen-entry-point" value="Group_BoardInfo_BLACKCAT"/> + + <device-support value="at90usb162"/> + <build type="define" name="BOARD" value="BOARD_BLACKCAT"/> + + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/BLACKCAT/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/BLACKCAT/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#bui" caption="Board Support - BUI"> + <build type="doxygen-entry-point" value="Group_BoardInfo_BUI"/> + + <device-support value="at90usb646"/> + <build type="define" name="BOARD" value="BOARD_BUI"/> + + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/BUI/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/BUI/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#bumbleb" caption="Board Support - BUMBLEB"> + <build type="doxygen-entry-point" value="Group_BoardInfo_BUMBLEB"/> + + <device-support value="at90usb162"/> + <build type="define" name="BOARD" value="BOARD_BUMBLEB"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + <require idref="lufa.drivers.board.joystick"/> + + <build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Joystick.h"/> + <build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#culv3" caption="Board Support - CULV3"> + <build type="doxygen-entry-point" value="Group_BoardInfo_CULV3"/> + + <device-support value="atmega32u4"/> + <build type="define" name="BOARD" value="BOARD_CULV3"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/CULV3/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/CULV3/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/CULV3/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#duce" caption="Board Support - DUCE"> + <build type="doxygen-entry-point" value="Group_BoardInfo_DUCE"/> + + <device-support value="atmega32u2"/> + <build type="define" name="BOARD" value="BOARD_DUCE"/> + + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/DUCE/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/DUCE/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#evk527" caption="Board Support - EVK527"> + <build type="doxygen-entry-point" value="Group_BoardInfo_EVK527"/> + + <device-support value="atmega32u4"/> + <build type="define" name="BOARD" value="BOARD_EVK527"/> + + <require idref="lufa.drivers.misc.at45db321c"/> + <require idref="lufa.drivers.peripheral.spi"/> + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.dataflash"/> + <require idref="lufa.drivers.board.joystick"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/EVK527/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/EVK527/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/EVK527/Dataflash.h"/> + <build type="header-file" value="Drivers/Board/AVR8/EVK527/Joystick.h"/> + <build type="header-file" value="Drivers/Board/AVR8/EVK527/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#jm_db_u2" caption="Board Support - JMDBU2"> + <build type="doxygen-entry-point" value="Group_BoardInfo_JMDBU2"/> + + <device-support value="atmega32u2"/> + <build type="define" name="BOARD" value="BOARD_JMDBU2"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/JMDBU2/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/JMDBU2/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/JMDBU2/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#leonardo" caption="Board Support - LEONARDO"> + <build type="doxygen-entry-point" value="Group_BoardInfo_LEONARDO"/> + + <device-support value="atmega32u4"/> + <build type="define" name="BOARD" value="BOARD_LEONARDO"/> + + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/LEONARDO/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/LEONARDO/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#maximus" caption="Board Support - MAXIMUS"> + <build type="doxygen-entry-point" value="Group_BoardInfo_MAXIMUS"/> + + <device-support value="at90usb162"/> + <build type="define" name="BOARD" value="BOARD_MAXIMUS"/> + + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/MAXIMUS/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MAXIMUS/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#micropendous_32u2" caption="Board Support - MICROPENDOUS_32U2"> + <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_32U2"/> + + <device-support value="atmega32u2"/> + <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_32U2"/> + + <require idref="lufa.drivers.board.leds"/> + <require idref="lufa.drivers.board.buttons"/> + + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#micropendous_a" caption="Board Support - MICROPENDOUS_A"> + <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_A"/> + + <device-support value="at90usb1287"/> + <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_A"/> + + <require idref="lufa.drivers.board.buttons"/> + + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#micropendous_1" caption="Board Support - MICROPENDOUS_1"> + <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_1"/> + + <device-support value="at90usb162"/> + <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_1"/> + + <require idref="lufa.drivers.board.buttons"/> + + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#micropendous_2" caption="Board Support - MICROPENDOUS_2"> + <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_2"/> + + <device-support value="atmega32u4"/> + <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_2"/> + + <require idref="lufa.drivers.board.buttons"/> + + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#micropendous_3" caption="Board Support - MICROPENDOUS_3"> + <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_3"/> + + <device-support value="at90usb1287"/> + <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_3"/> + + <require idref="lufa.drivers.board.buttons"/> + + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#micropendous_4" caption="Board Support - MICROPENDOUS_4"> + <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_4"/> + + <device-support value="at90usb1287"/> + <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_4"/> + + <require idref="lufa.drivers.board.buttons"/> + + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#micropendous_dip" caption="Board Support - MICROPENDOUS_DIP"> + <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_DIP"/> + + <device-support value="at90usb1287"/> + <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_DIP"/> + + <require idref="lufa.drivers.board.buttons"/> + + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#micropendous_rev1" caption="Board Support - MICROPENDOUS_REV1"> + <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_REV1"/> + + <device-support value="at90usb1287"/> + <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_REV1"/> + + <require idref="lufa.drivers.board.leds"/> + <require idref="lufa.drivers.board.buttons"/> + + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#micropendous_rev2" caption="Board Support - MICROPENDOUS_REV2"> + <build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_REV2"/> + + <device-support value="at90usb1287"/> + <build type="define" name="BOARD" value="BOARD_MICROPENDOUS_REV2"/> + + <require idref="lufa.drivers.board.leds"/> + <require idref="lufa.drivers.board.buttons"/> + + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#microsin_162" caption="Board Support - MICROSIN162"> + <build type="doxygen-entry-point" value="Group_BoardInfo_MICROSIN162"/> + + <device-support value="atmega162"/> + <build type="define" name="BOARD" value="BOARD_MICROSIN162"/> + + <require idref="lufa.drivers.board.leds"/> + <require idref="lufa.drivers.board.buttons"/> + + <build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/LEDs.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/Buttons.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#minimus" caption="Board Support - MINIMUS"> + <build type="doxygen-entry-point" value="Group_BoardInfo_MINIMUS"/> + + <device-support value="atmega32u2"/> + <build type="define" name="BOARD" value="BOARD_MINIMUS"/> + + <require idref="lufa.drivers.board.leds"/> + <require idref="lufa.drivers.board.buttons"/> + + <build type="header-file" value="Drivers/Board/AVR8/MINIMUS/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MINIMUS/LEDs.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MINIMUS/Buttons.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#multio" caption="Board Support - MULTIO"> + <build type="doxygen-entry-point" value="Group_BoardInfo_MULTIO"/> + + <device-support value="at90usb162"/> + <build type="define" name="BOARD" value="BOARD_MULTIO"/> + + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/MULTIO/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MULTIO/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#olimex_162" caption="Board Support - OLIMEX162"> + <build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEX162"/> + + <device-support value="at90usb162"/> + <build type="define" name="BOARD" value="BOARD_OLIMEX162"/> + + <require idref="lufa.drivers.board.leds"/> + <require idref="lufa.drivers.board.buttons"/> + + <build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/LEDs.h"/> + <build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/Buttons.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#olimex_32u4" caption="Board Support - OLIMEX32U4"> + <build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEX32U4"/> + + <device-support value="atmega32u4"/> + <build type="define" name="BOARD" value="BOARD_OLIMEX32U4"/> + + <require idref="lufa.drivers.board.leds"/> + <require idref="lufa.drivers.board.buttons"/> + + <build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/LEDs.h"/> + <build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/Buttons.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#olimex_isp_mkii" caption="Board Support - OLIMEXISPMK2"> + <build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEXISPMK2"/> + + <device-support value="at90usb162"/> + <build type="define" name="BOARD" value="BOARD_OLIMEXISPMK2"/> + + <require idref="lufa.drivers.board.leds"/> + <require idref="lufa.drivers.board.buttons"/> + + <build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/LEDs.h"/> + <build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/Buttons.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#olimex_t32u4" caption="Board Support - OLIMEX_T32U4"> + <build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEXT32U4"/> + + <device-support value="atmega32u4"/> + <build type="define" name="BOARD" value="BOARD_OLIMEXT32U4"/> + + <require idref="lufa.drivers.board.leds"/> + <require idref="lufa.drivers.board.buttons"/> + + <build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/LEDs.h"/> + <build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/Buttons.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#rzusbstick" caption="Board Support - RZUSBSTICK"> + <build type="doxygen-entry-point" value="Group_BoardInfo_RZUSBSTICK"/> + + <device-support value="at90usb1287"/> + <build type="define" name="BOARD" value="BOARD_RZUSBSTICK"/> + + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/RZUSBSTICK/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/RZUSBSTICK/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#sparkfun_8u2" caption="Board Support - SPARKFUN8U2"> + <build type="doxygen-entry-point" value="Group_BoardInfo_SPARKFUN8U2"/> + + <device-support value="atmega8u2"/> + <build type="define" name="BOARD" value="BOARD_SPARKFUN8U2"/> + + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/SPARKFUN8U2/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#stk525" caption="Board Support - STK525"> + <build type="doxygen-entry-point" value="Group_BoardInfo_STK525"/> + + <device-support value="at90usb1287"/> + <device-support value="at90usb1286"/> + <device-support value="at90usb647"/> + <device-support value="at90usb646"/> + <build type="define" name="BOARD" value="BOARD_STK525"/> + + <require idref="lufa.drivers.misc.at45db321c"/> + <require idref="lufa.drivers.peripheral.spi"/> + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.dataflash"/> + <require idref="lufa.drivers.board.joystick"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/STK525/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/STK525/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/STK525/Dataflash.h"/> + <build type="header-file" value="Drivers/Board/AVR8/STK525/Joystick.h"/> + <build type="header-file" value="Drivers/Board/AVR8/STK525/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#stk526" caption="Board Support - STK526"> + <build type="doxygen-entry-point" value="Group_BoardInfo_STK526"/> + + <device-support value="at90usb162"/> + <device-support value="at90usb82"/> + <device-support value="atmega32u2"/> + <device-support value="atmega16u2"/> + <device-support value="atmega8u2"/> + <build type="define" name="BOARD" value="BOARD_STK526"/> + + <require idref="lufa.drivers.misc.at45db642d"/> + <require idref="lufa.drivers.peripheral.spi"/> + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.dataflash"/> + <require idref="lufa.drivers.board.joystick"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/STK526/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/STK526/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/STK526/Dataflash.h"/> + <build type="header-file" value="Drivers/Board/AVR8/STK526/Joystick.h"/> + <build type="header-file" value="Drivers/Board/AVR8/STK526/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#teensy" caption="Board Support - TEENSY"> + <build type="doxygen-entry-point" value="Group_BoardInfo_TEENSY"/> + + <device-support value="at90usb162"/> + <build type="define" name="BOARD" value="BOARD_TEENSY"/> + + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/TEENSY/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/TEENSY/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#teensy2" caption="Board Support - TEENSY2"> + <build type="doxygen-entry-point" value="Group_BoardInfo_TEENSY2"/> + + <device-support value="at90usb646"/> + <build type="define" name="BOARD" value="BOARD_TEENSY2"/> + + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/TEENSY/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/TEENSY/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#tul" caption="Board Support - TUL"> + <build type="doxygen-entry-point" value="Group_BoardInfo_TUL"/> + + <device-support value="atmega32u4"/> + <build type="define" name="BOARD" value="BOARD_TUL"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/TUL/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/TUL/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/TUL/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#udip" caption="Board Support - UDIP"> + <build type="doxygen-entry-point" value="Group_BoardInfo_UDIP"/> + + <device-support value="atmega32u2"/> + <build type="define" name="BOARD" value="BOARD_UDIP"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/UDIP/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/UDIP/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/UDIP/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#uno" caption="Board Support - UNO"> + <build type="doxygen-entry-point" value="Group_BoardInfo_UNO"/> + + <device-support value="atmega8u2"/> + <device-support value="atmega16u2"/> + <build type="define" name="BOARD" value="BOARD_UNO"/> + + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/UNO/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/UNO/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#usb2ax" caption="Board Support - USB2AX"> + <build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX"/> + + <device-support value="atmega32u2"/> + <build type="define" name="BOARD" value="BOARD_USB2AX"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#usb2ax_v3" caption="Board Support - USB2AX_V3"> + <build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX_V3"/> + + <device-support value="atmega32u2"/> + <build type="define" name="BOARD" value="BOARD_USB2AX_V3"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#usb2ax_v3_1" caption="Board Support - USB2AX_V31"> + <build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX_V31"/> + + <device-support value="atmega32u2"/> + <build type="define" name="BOARD" value="BOARD_USB2AX_V31"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#usbfoo" caption="Board Support - USBFOO"> + <build type="doxygen-entry-point" value="Group_BoardInfo_USBFOO"/> + + <device-support value="atmega162"/> + <build type="define" name="BOARD" value="BOARD_USBFOO"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/USBFOO/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/USBFOO/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/USBFOO/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#usbkey" caption="Board Support - USBKEY"> + <build type="doxygen-entry-point" value="Group_BoardInfo_USBKEY"/> + + <device-support value="at90usb1287"/> + <build type="define" name="BOARD" value="BOARD_USBKEY"/> + + <require idref="lufa.drivers.misc.at45db642d"/> + <require idref="lufa.drivers.peripheral.spi"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.dataflash"/> + <require idref="lufa.drivers.board.joystick"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/USBKEY/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/USBKEY/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/USBKEY/Dataflash.h"/> + <build type="header-file" value="Drivers/Board/AVR8/USBKEY/Joystick.h"/> + <build type="header-file" value="Drivers/Board/AVR8/USBKEY/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#usbtiny_mkii" caption="Board Support - USBTINYMKII"> + <build type="doxygen-entry-point" value="Group_BoardInfo_USBTINYMKII"/> + + <device-support value="at90usb162"/> + <build type="define" name="BOARD" value="BOARD_USBTINYMKII"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/LEDs.h"/> + </module> + + <module type="driver" id="lufa.drivers.board#xplain_rev1" caption="Board Support - XPLAIN (HW Rev 1)"> + <build type="doxygen-entry-point" value="Group_BoardInfo_XPLAIN_REV1"/> + + <device-support value="at90usb1287"/> + + <require idref="lufa.drivers.misc.at45db642d"/> + <require idref="lufa.drivers.peripheral.spi"/> + <require idref="lufa.drivers.board.dataflash"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Dataflash.h"/> + <build type="header-file" value="Drivers/Board/AVR8/XPLAIN/LEDs.h"/> + + <build type="define" name="BOARD" value="BOARD_XPLAIN_REV1"/> + </module> + + <module type="driver" id="lufa.drivers.board#xplain" caption="Board Support - XPLAIN (HW Rev 2+)"> + <build type="doxygen-entry-point" value="Group_BoardInfo_XPLAIN"/> + + <device-support value="at90usb1287"/> + + <require idref="lufa.drivers.misc.at45db642d"/> + <require idref="lufa.drivers.peripheral.spi"/> + <require idref="lufa.drivers.board.dataflash"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Dataflash.h"/> + <build type="header-file" value="Drivers/Board/AVR8/XPLAIN/LEDs.h"/> + + <build type="define" name="BOARD" value="BOARD_XPLAIN"/> + </module> + + <module type="driver" id="lufa.drivers.board#a3bu_xplained" caption="Board Support - A3BU_XPLAINED"> + <build type="doxygen-entry-point" value="Group_BoardInfo_A3BU_XPLAINED"/> + + <device-support value="atxmega256a3bu"/> + + <require idref="lufa.drivers.misc.at45db642d"/> + <require idref="lufa.drivers.peripheral.usart_spi"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.dataflash"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Board.h"/> + <build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h"/> + <build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h"/> + <build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h"/> + + <build type="define" name="BOARD" value="BOARD_A3BU_XPLAINED"/> + </module> + + <module type="driver" id="lufa.drivers.board#b1_xplained" caption="Board Support - B1_XPLAINED"> + <build type="doxygen-entry-point" value="Group_BoardInfo_B1_XPLAINED"/> + + <device-support value="atxmega128b1"/> + + <require idref="lufa.drivers.misc.at45db642d"/> + <require idref="lufa.drivers.peripheral.usart_spi"/> + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.dataflash"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Board.h"/> + <build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h"/> + <build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h"/> + <build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h"/> + + <build type="define" name="BOARD" value="BOARD_B1_XPLAINED"/> + </module> + + <module type="driver" id="lufa.drivers.board#evk1100" caption="Board Support - EVK1100"> + <build type="doxygen-entry-point" value="Group_BoardInfo_EVK1100"/> + + <device-support value="at32uc3a0512"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.joystick"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/UC3/EVK1100/Board.h"/> + <build type="header-file" value="Drivers/Board/UC3/EVK1100/Buttons.h"/> + <build type="header-file" value="Drivers/Board/UC3/EVK1100/Joystick.h"/> + <build type="header-file" value="Drivers/Board/UC3/EVK1100/LEDs.h"/> + + <build type="define" name="BOARD" value="BOARD_EVK1100"/> + </module> + + <module type="driver" id="lufa.drivers.board#evk1101" caption="Board Support - EVK1101"> + <build type="doxygen-entry-point" value="Group_BoardInfo_EVK1101"/> + + <device-support value="at32uc3b0256"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.joystick"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/UC3/EVK1101/Board.h"/> + <build type="header-file" value="Drivers/Board/UC3/EVK1101/Buttons.h"/> + <build type="header-file" value="Drivers/Board/UC3/EVK1101/Joystick.h"/> + <build type="header-file" value="Drivers/Board/UC3/EVK1101/LEDs.h"/> + + <build type="define" name="BOARD" value="BOARD_EVK1101"/> + </module> + + <module type="driver" id="lufa.drivers.board#evk1104" caption="Board Support - EVK1104"> + <build type="doxygen-entry-point" value="Group_BoardInfo_EVK1104"/> + + <device-support value="at32uc3a3256"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/UC3/EVK1104/Board.h"/> + <build type="header-file" value="Drivers/Board/UC3/EVK1104/Buttons.h"/> + <build type="header-file" value="Drivers/Board/UC3/EVK1104/LEDs.h"/> + + <build type="define" name="BOARD" value="BOARD_EVK1104"/> + </module> + + <module type="driver" id="lufa.drivers.board#uc3a3_xplained" caption="Board Support - UC3A3_XPLAINED"> + <build type="doxygen-entry-point" value="Group_BoardInfo_UC3_A3_XPLAINED"/> + + <device-support value="at32uc3a3256"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/Board.h"/> + <build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/Buttons.h"/> + <build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/LEDs.h"/> + + <build type="define" name="BOARD" value="BOARD_UC3A3_XPLAINED"/> + </module> + + <module type="driver" id="lufa.drivers.board#stange_isp" caption="Board Support - STANGE_ISP"> + <build type="doxygen-entry-point" value="Group_BoardInfo_STANGE_ISP"/> + + <device-support value="at90usb162"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/LEDs.h"/> + + <build type="define" name="BOARD" value="BOARD_STANGE_ISP"/> + </module> + + <module type="driver" id="lufa.drivers.board#c3_xplained" caption="Board Support - C3_XPLAINED"> + <build type="doxygen-entry-point" value="Group_BoardInfo_C3_XPLAINED"/> + + <device-support value="atxmega384c3"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/Board.h"/> + <build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/Buttons.h"/> + <build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/LEDs.h"/> + + <build type="define" name="BOARD" value="BOARD_C3_XPLAINED"/> + </module> + + <module type="driver" id="lufa.drivers.board#u2s" caption="Board Support - U2S"> + <build type="doxygen-entry-point" value="Group_BoardInfo_U2S"/> + + <device-support value="atmega32u2"/> + + <require idref="lufa.drivers.board.buttons"/> + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/U2S/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/U2S/Buttons.h"/> + <build type="header-file" value="Drivers/Board/AVR8/U2S/LEDs.h"/> + + <build type="define" name="BOARD" value="BOARD_U2S"/> + </module> + + <module type="driver" id="lufa.drivers.board#yun" caption="Board Support - YUN"> + <build type="doxygen-entry-point" value="Group_BoardInfo_YUN"/> + + <device-support value="atmega32u4"/> + + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/YUN/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/YUN/LEDs.h"/> + + <build type="define" name="BOARD" value="BOARD_YUN"/> + </module> + + <module type="driver" id="lufa.drivers.board#yun" caption="Board Support - MICRO"> + <build type="doxygen-entry-point" value="Group_BoardInfo_MICRO"/> + + <device-support value="atmega32u4"/> + + <require idref="lufa.drivers.board.leds"/> + + <build type="header-file" value="Drivers/Board/AVR8/MICRO/Board.h"/> + <build type="header-file" value="Drivers/Board/AVR8/MICRO/LEDs.h"/> + + <build type="define" name="BOARD" value="BOARD_MICRO"/> + </module> + </select-by-config> + </asf> +</lufa> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_misc.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_misc.xml index 8680ca2dff..4311ae87b7 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_misc.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_misc.xml @@ -1,57 +1,57 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Atmel Studio framework integration file -->
-
-<lufa>
- <asf>
- <module type="component" id="lufa.drivers.misc.at45db321c" caption="LUFA AT45DB321C Dataflash Commands">
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_AT45DB321C"/>
-
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Misc/AT45DB321C.h"/>
- </module>
-
- <module type="component" id="lufa.drivers.misc.at45db642d" caption="LUFA AT45DB642D Dataflash Commands">
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_AT45DB321C"/>
-
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Misc/AT45DB642D.h"/>
- </module>
-
- <module type="service" id="lufa.drivers.misc.ringbuffer" caption="LUFA Ring Buffer">
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_RingBuff"/>
-
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Misc/RingBuffer.h"/>
- </module>
-
- <module type="service" id="lufa.drivers.misc.ansi" caption="LUFA ANSI Terminal Commands">
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_Terminal"/>
-
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Misc/TerminalCodes.h"/>
- </module>
- </asf>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Atmel Studio framework integration file --> + +<lufa> + <asf> + <module type="component" id="lufa.drivers.misc.at45db321c" caption="LUFA AT45DB321C Dataflash Commands"> + <device-support-alias value="lufa_avr8"/> + <device-support-alias value="lufa_xmega"/> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_AT45DB321C"/> + + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Misc/AT45DB321C.h"/> + </module> + + <module type="component" id="lufa.drivers.misc.at45db642d" caption="LUFA AT45DB642D Dataflash Commands"> + <device-support-alias value="lufa_avr8"/> + <device-support-alias value="lufa_xmega"/> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_AT45DB321C"/> + + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Misc/AT45DB642D.h"/> + </module> + + <module type="service" id="lufa.drivers.misc.ringbuffer" caption="LUFA Ring Buffer"> + <device-support-alias value="lufa_avr8"/> + <device-support-alias value="lufa_xmega"/> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_RingBuff"/> + + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Misc/RingBuffer.h"/> + </module> + + <module type="service" id="lufa.drivers.misc.ansi" caption="LUFA ANSI Terminal Commands"> + <device-support-alias value="lufa_avr8"/> + <device-support-alias value="lufa_xmega"/> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_Terminal"/> + + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Misc/TerminalCodes.h"/> + </module> + </asf> </lufa>
\ No newline at end of file diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_peripheral.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_peripheral.xml index 3a982e565f..76ea516dbc 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_peripheral.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_peripheral.xml @@ -1,198 +1,198 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Atmel Studio framework integration file -->
-
-<lufa>
- <asf>
- <select-by-device id="lufa.drivers.peripheral.usart" caption="LUFA USART Driver">
- <module type="driver" id="lufa.drivers.peripheral.usart#avr8" caption="LUFA USART Driver - AVR8">
- <device-support-alias value="lufa_avr8"/>
-
- <build type="doxygen-entry-point" value="Group_Serial"/>
-
- <require idref="lufa.common"/>
- <require idref="lufa.drivers.misc.ansi"/>
-
- <build type="c-source" value="Drivers/Peripheral/AVR8/Serial_AVR8.c"/>
- <build type="header-file" value="Drivers/Peripheral/AVR8/Serial_AVR8.h"/>
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Peripheral/Serial.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.peripheral.usart#xmega" caption="LUFA USART Driver - AVR8">
- <device-support-alias value="lufa_xmega"/>
-
- <build type="doxygen-entry-point" value="Group_Serial"/>
-
- <require idref="lufa.common"/>
- <require idref="lufa.drivers.misc.ansi"/>
-
- <build type="c-source" value="Drivers/Peripheral/XMEGA/Serial_XMEGA.c"/>
- <build type="header-file" value="Drivers/Peripheral/XMEGA/Serial_XMEGA.h"/>
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Peripheral/Serial.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.peripheral.usart#uc3" caption="LUFA USART Driver - UC3">
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_Serial"/>
-
- <require idref="lufa.common"/>
- <require idref="lufa.drivers.misc.ansi"/>
-
- <info type="gui-flag" value="hidden"/>
- </module>
- </select-by-device>
-
- <select-by-device id="lufa.drivers.peripheral.spi" caption="LUFA SPI Driver">
- <module type="driver" id="lufa.drivers.peripheral.spi#avr8" caption="LUFA SPI Driver - AVR8">
- <device-support-alias value="lufa_avr8"/>
-
- <build type="doxygen-entry-point" value="Group_SPI"/>
-
- <require idref="lufa.common"/>
-
- <build type="header-file" value="Drivers/Peripheral/AVR8/SPI_AVR8.h"/>
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Peripheral/SPI.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.peripheral.spi#xmega" caption="LUFA SPI Driver - XMEGA">
- <device-support-alias value="lufa_xmega"/>
-
- <build type="doxygen-entry-point" value="Group_SPI"/>
-
- <require idref="lufa.common"/>
-
- <build type="header-file" value="Drivers/Peripheral/XMEGA/SPI_XMEGA.h"/>
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Peripheral/SPI.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.peripheral.spi#uc3" caption="LUFA SPI Driver - UC3">
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_SPI"/>
-
- <require idref="lufa.common"/>
-
- <info type="gui-flag" value="hidden"/>
- </module>
- </select-by-device>
-
- <select-by-device id="lufa.drivers.peripheral.usart_spi" caption="LUFA USART SPI Driver">
- <module type="driver" id="lufa.drivers.peripheral.usart_spi#avr8" caption="LUFA USART SPI Driver - AVR8">
- <device-support-alias value="lufa_avr8"/>
-
- <build type="doxygen-entry-point" value="Group_SerialSPI"/>
-
- <require idref="lufa.common"/>
-
- <build type="header-file" value="Drivers/Peripheral/AVR8/SerialSPI_AVR8.h"/>
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Peripheral/SerialSPI.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.peripheral.usart_spi#xmega" caption="LUFA USART SPI Driver - XMEGA">
- <device-support-alias value="lufa_xmega"/>
-
- <build type="doxygen-entry-point" value="Group_SerialSPI"/>
-
- <require idref="lufa.common"/>
-
- <build type="header-file" value="Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h"/>
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Peripheral/SerialSPI.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.peripheral.usart_spi#uc3" caption="LUFA USART SPI Driver - UC3">
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_SerialSPI"/>
-
- <require idref="lufa.common"/>
-
- <info type="gui-flag" value="hidden"/>
- </module>
- </select-by-device>
-
- <select-by-device id="lufa.drivers.peripheral.twi" caption="LUFA TWI Master Driver">
- <module type="driver" id="lufa.drivers.peripheral.twi#avr8" caption="LUFA TWI Master Driver - AVR8">
- <device-support-alias value="lufa_avr8"/>
-
- <build type="doxygen-entry-point" value="Group_TWI"/>
-
- <require idref="lufa.common"/>
-
- <build type="c-source" value="Drivers/Peripheral/AVR8/TWI_AVR8.c"/>
- <build type="header-file" value="Drivers/Peripheral/AVR8/TWI_AVR8.h"/>
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Peripheral/TWI.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.peripheral.twi#xmega" caption="LUFA TWI Master Driver - XMEGA">
- <device-support-alias value="lufa_xmega"/>
-
- <build type="doxygen-entry-point" value="Group_TWI"/>
-
- <require idref="lufa.common"/>
-
- <build type="c-source" value="Drivers/Peripheral/XMEGA/TWI_XMEGA.c"/>
- <build type="header-file" value="Drivers/Peripheral/XMEGA/TWI_XMEGA.h"/>
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Peripheral/TWI.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.peripheral.twi#uc3" caption="LUFA TWI Master Driver - UC3">
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_TWI"/>
-
- <require idref="lufa.common"/>
-
- <info type="gui-flag" value="hidden"/>
- </module>
- </select-by-device>
-
- <select-by-device id="lufa.drivers.peripheral.adc" caption="LUFA ADC Driver">
- <module type="driver" id="lufa.drivers.peripheral.adc#avr8" caption="LUFA ADC Driver - AVR8">
- <device-support-alias value="lufa_avr8"/>
-
- <build type="doxygen-entry-point" value="Group_ADC"/>
-
- <require idref="lufa.common"/>
-
- <build type="header-file" value="Drivers/Peripheral/AVR8/ADC_AVR8.h"/>
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/Peripheral/ADC.h"/>
- </module>
-
- <module type="driver" id="lufa.drivers.peripheral.adc#xmega" caption="LUFA ADC Driver - XMEGA">
- <device-support-alias value="lufa_xmega"/>
-
- <build type="doxygen-entry-point" value="Group_ADC"/>
-
- <require idref="lufa.common"/>
-
- <info type="gui-flag" value="hidden"/>
- </module>
-
- <module type="driver" id="lufa.drivers.peripheral.adc#uc3" caption="LUFA ADC Driver - UC3">
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_ADC"/>
-
- <require idref="lufa.common"/>
-
- <info type="gui-flag" value="hidden"/>
- </module>
- </select-by-device>
- </asf>
-</lufa>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Atmel Studio framework integration file --> + +<lufa> + <asf> + <select-by-device id="lufa.drivers.peripheral.usart" caption="LUFA USART Driver"> + <module type="driver" id="lufa.drivers.peripheral.usart#avr8" caption="LUFA USART Driver - AVR8"> + <device-support-alias value="lufa_avr8"/> + + <build type="doxygen-entry-point" value="Group_Serial"/> + + <require idref="lufa.common"/> + <require idref="lufa.drivers.misc.ansi"/> + + <build type="c-source" value="Drivers/Peripheral/AVR8/Serial_AVR8.c"/> + <build type="header-file" value="Drivers/Peripheral/AVR8/Serial_AVR8.h"/> + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Peripheral/Serial.h"/> + </module> + + <module type="driver" id="lufa.drivers.peripheral.usart#xmega" caption="LUFA USART Driver - AVR8"> + <device-support-alias value="lufa_xmega"/> + + <build type="doxygen-entry-point" value="Group_Serial"/> + + <require idref="lufa.common"/> + <require idref="lufa.drivers.misc.ansi"/> + + <build type="c-source" value="Drivers/Peripheral/XMEGA/Serial_XMEGA.c"/> + <build type="header-file" value="Drivers/Peripheral/XMEGA/Serial_XMEGA.h"/> + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Peripheral/Serial.h"/> + </module> + + <module type="driver" id="lufa.drivers.peripheral.usart#uc3" caption="LUFA USART Driver - UC3"> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_Serial"/> + + <require idref="lufa.common"/> + <require idref="lufa.drivers.misc.ansi"/> + + <info type="gui-flag" value="hidden"/> + </module> + </select-by-device> + + <select-by-device id="lufa.drivers.peripheral.spi" caption="LUFA SPI Driver"> + <module type="driver" id="lufa.drivers.peripheral.spi#avr8" caption="LUFA SPI Driver - AVR8"> + <device-support-alias value="lufa_avr8"/> + + <build type="doxygen-entry-point" value="Group_SPI"/> + + <require idref="lufa.common"/> + + <build type="header-file" value="Drivers/Peripheral/AVR8/SPI_AVR8.h"/> + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Peripheral/SPI.h"/> + </module> + + <module type="driver" id="lufa.drivers.peripheral.spi#xmega" caption="LUFA SPI Driver - XMEGA"> + <device-support-alias value="lufa_xmega"/> + + <build type="doxygen-entry-point" value="Group_SPI"/> + + <require idref="lufa.common"/> + + <build type="header-file" value="Drivers/Peripheral/XMEGA/SPI_XMEGA.h"/> + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Peripheral/SPI.h"/> + </module> + + <module type="driver" id="lufa.drivers.peripheral.spi#uc3" caption="LUFA SPI Driver - UC3"> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_SPI"/> + + <require idref="lufa.common"/> + + <info type="gui-flag" value="hidden"/> + </module> + </select-by-device> + + <select-by-device id="lufa.drivers.peripheral.usart_spi" caption="LUFA USART SPI Driver"> + <module type="driver" id="lufa.drivers.peripheral.usart_spi#avr8" caption="LUFA USART SPI Driver - AVR8"> + <device-support-alias value="lufa_avr8"/> + + <build type="doxygen-entry-point" value="Group_SerialSPI"/> + + <require idref="lufa.common"/> + + <build type="header-file" value="Drivers/Peripheral/AVR8/SerialSPI_AVR8.h"/> + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Peripheral/SerialSPI.h"/> + </module> + + <module type="driver" id="lufa.drivers.peripheral.usart_spi#xmega" caption="LUFA USART SPI Driver - XMEGA"> + <device-support-alias value="lufa_xmega"/> + + <build type="doxygen-entry-point" value="Group_SerialSPI"/> + + <require idref="lufa.common"/> + + <build type="header-file" value="Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h"/> + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Peripheral/SerialSPI.h"/> + </module> + + <module type="driver" id="lufa.drivers.peripheral.usart_spi#uc3" caption="LUFA USART SPI Driver - UC3"> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_SerialSPI"/> + + <require idref="lufa.common"/> + + <info type="gui-flag" value="hidden"/> + </module> + </select-by-device> + + <select-by-device id="lufa.drivers.peripheral.twi" caption="LUFA TWI Master Driver"> + <module type="driver" id="lufa.drivers.peripheral.twi#avr8" caption="LUFA TWI Master Driver - AVR8"> + <device-support-alias value="lufa_avr8"/> + + <build type="doxygen-entry-point" value="Group_TWI"/> + + <require idref="lufa.common"/> + + <build type="c-source" value="Drivers/Peripheral/AVR8/TWI_AVR8.c"/> + <build type="header-file" value="Drivers/Peripheral/AVR8/TWI_AVR8.h"/> + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Peripheral/TWI.h"/> + </module> + + <module type="driver" id="lufa.drivers.peripheral.twi#xmega" caption="LUFA TWI Master Driver - XMEGA"> + <device-support-alias value="lufa_xmega"/> + + <build type="doxygen-entry-point" value="Group_TWI"/> + + <require idref="lufa.common"/> + + <build type="c-source" value="Drivers/Peripheral/XMEGA/TWI_XMEGA.c"/> + <build type="header-file" value="Drivers/Peripheral/XMEGA/TWI_XMEGA.h"/> + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Peripheral/TWI.h"/> + </module> + + <module type="driver" id="lufa.drivers.peripheral.twi#uc3" caption="LUFA TWI Master Driver - UC3"> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_TWI"/> + + <require idref="lufa.common"/> + + <info type="gui-flag" value="hidden"/> + </module> + </select-by-device> + + <select-by-device id="lufa.drivers.peripheral.adc" caption="LUFA ADC Driver"> + <module type="driver" id="lufa.drivers.peripheral.adc#avr8" caption="LUFA ADC Driver - AVR8"> + <device-support-alias value="lufa_avr8"/> + + <build type="doxygen-entry-point" value="Group_ADC"/> + + <require idref="lufa.common"/> + + <build type="header-file" value="Drivers/Peripheral/AVR8/ADC_AVR8.h"/> + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/Peripheral/ADC.h"/> + </module> + + <module type="driver" id="lufa.drivers.peripheral.adc#xmega" caption="LUFA ADC Driver - XMEGA"> + <device-support-alias value="lufa_xmega"/> + + <build type="doxygen-entry-point" value="Group_ADC"/> + + <require idref="lufa.common"/> + + <info type="gui-flag" value="hidden"/> + </module> + + <module type="driver" id="lufa.drivers.peripheral.adc#uc3" caption="LUFA ADC Driver - UC3"> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_ADC"/> + + <require idref="lufa.common"/> + + <info type="gui-flag" value="hidden"/> + </module> + </select-by-device> + </asf> +</lufa> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb.xml index 7ff4b39492..263c411dff 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb.xml @@ -1,32 +1,32 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Atmel Studio framework integration file -->
-
-<lufa>
- <asf>
- <module type="driver" id="lufa.drivers.usb" caption="LUFA USB Driver">
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_USB"/>
-
- <build type="define" name="USE_LUFA_CONFIG_HEADER" value=""/>
- <build type="module-config" subtype="path" value="CodeTemplates"/>
- <build type="module-config" subtype="required-header-file" value="LUFAConfig.h"/>
-
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Drivers/USB/USB.h"/>
-
- <require idref="lufa.common"/>
- <require idref="lufa.drivers.usb.class"/>
- <require idref="lufa.drivers.usb.core"/>
- </module>
- </asf>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Atmel Studio framework integration file --> + +<lufa> + <asf> + <module type="driver" id="lufa.drivers.usb" caption="LUFA USB Driver"> + <device-support-alias value="lufa_avr8"/> + <device-support-alias value="lufa_xmega"/> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_USB"/> + + <build type="define" name="USE_LUFA_CONFIG_HEADER" value=""/> + <build type="module-config" subtype="path" value="CodeTemplates"/> + <build type="module-config" subtype="required-header-file" value="LUFAConfig.h"/> + + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Drivers/USB/USB.h"/> + + <require idref="lufa.common"/> + <require idref="lufa.drivers.usb.class"/> + <require idref="lufa.drivers.usb.core"/> + </module> + </asf> </lufa>
\ No newline at end of file diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class.xml index cd18bf10e7..67ab760d33 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class.xml @@ -1,32 +1,32 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Atmel Studio framework integration file -->
-
-<lufa>
- <asf>
- <module type="service" id="lufa.drivers.usb.class" caption="LUFA USB Class Drivers">
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <info type="gui-flag" value="hidden"/>
- <build type="doxygen-entry-point" value="Group_USBClassDrivers"/>
-
- <require idref="lufa.drivers.usb.class.android"/>
- <require idref="lufa.drivers.usb.class.audio"/>
- <require idref="lufa.drivers.usb.class.cdc"/>
- <require idref="lufa.drivers.usb.class.hid"/>
- <require idref="lufa.drivers.usb.class.ms"/>
- <require idref="lufa.drivers.usb.class.midi"/>
- <require idref="lufa.drivers.usb.class.printer"/>
- <require idref="lufa.drivers.usb.class.rndis"/>
- <require idref="lufa.drivers.usb.class.si"/>
- </module>
- </asf>
-</lufa>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Atmel Studio framework integration file --> + +<lufa> + <asf> + <module type="service" id="lufa.drivers.usb.class" caption="LUFA USB Class Drivers"> + <device-support-alias value="lufa_avr8"/> + <device-support-alias value="lufa_xmega"/> + <device-support-alias value="lufa_uc3"/> + + <info type="gui-flag" value="hidden"/> + <build type="doxygen-entry-point" value="Group_USBClassDrivers"/> + + <require idref="lufa.drivers.usb.class.android"/> + <require idref="lufa.drivers.usb.class.audio"/> + <require idref="lufa.drivers.usb.class.cdc"/> + <require idref="lufa.drivers.usb.class.hid"/> + <require idref="lufa.drivers.usb.class.ms"/> + <require idref="lufa.drivers.usb.class.midi"/> + <require idref="lufa.drivers.usb.class.printer"/> + <require idref="lufa.drivers.usb.class.rndis"/> + <require idref="lufa.drivers.usb.class.si"/> + </module> + </asf> +</lufa> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core.xml index 58f8917ef4..58a0b388f6 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core.xml @@ -1,85 +1,85 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Atmel Studio framework integration file -->
-
-<lufa>
- <asf>
- <module type="driver" id="lufa.drivers.usb.core.common" caption="LUFA USB Core Driver - Common">
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="doxygen-entry-point" value="Group_USBManagement"/>
-
- <info type="gui-flag" value="hidden"/>
-
- <build type="header-file" value="Drivers/USB/Core/Device.h"/>
- <build type="header-file" value="Drivers/USB/Core/Endpoint.h"/>
- <build type="header-file" value="Drivers/USB/Core/Host.h"/>
- <build type="header-file" value="Drivers/USB/Core/Pipe.h"/>
- <build type="header-file" value="Drivers/USB/Core/OTG.h"/>
- <build type="header-file" value="Drivers/USB/Core/USBController.h"/>
- <build type="header-file" value="Drivers/USB/Core/USBInterrupt.h"/>
- <build type="header-file" value="Drivers/USB/Core/EndpointStream.h"/>
- <build type="header-file" value="Drivers/USB/Core/PipeStream.h"/>
- <build type="c-source" value="Drivers/USB/Core/ConfigDescriptors.c"/>
- <build type="header-file" value="Drivers/USB/Core/ConfigDescriptors.h"/>
- <build type="c-source" value="Drivers/USB/Core/DeviceStandardReq.c"/>
- <build type="header-file" value="Drivers/USB/Core/DeviceStandardReq.h"/>
- <build type="c-source" value="Drivers/USB/Core/Events.c"/>
- <build type="header-file" value="Drivers/USB/Core/Events.h"/>
- <build type="c-source" value="Drivers/USB/Core/HostStandardReq.c"/>
- <build type="header-file" value="Drivers/USB/Core/HostStandardReq.h"/>
- <build type="c-source" value="Drivers/USB/Core/USBTask.c"/>
- <build type="header-file" value="Drivers/USB/Core/USBTask.h"/>
- <build type="header-file" value="Drivers/USB/Core/USBMode.h"/>
- <build type="header-file" value="Drivers/USB/Core/StdDescriptors.h"/>
- <build type="header-file" value="Drivers/USB/Core/StdRequestType.h"/>
-
- <build type="c-source" value="Drivers/USB/Class/Common/HIDParser.c"/>
- <build type="header-file" value="Drivers/USB/Class/Common/HIDParser.h"/>
- <build type="header-file" value="Drivers/USB/Class/Common/HIDReportData.h"/>
- </module>
-
- <select-by-device id="lufa.drivers.usb.core" caption="LUFA USB Core Driver">
- <module type="driver" id="lufa.drivers.usb.core#avr8" caption="LUFA USB Core Driver - AVR8">
- <device-support-alias value="lufa_avr8"/>
-
- <info type="gui-flag" value="hidden"/>
-
- <build type="doxygen-entry-point" value="Group_USBManagement_AVR8"/>
-
- <require idref="lufa.drivers.usb.core.common"/>
- <require idref="lufa.drivers.usb.core.avr8"/>
- </module>
-
- <module type="driver" id="lufa.drivers.usb.core#xmega" caption="LUFA USB Core Driver - XMEGA">
- <device-support-alias value="lufa_xmega"/>
-
- <info type="gui-flag" value="hidden"/>
-
- <build type="doxygen-entry-point" value="Group_USBManagement_XMEGA"/>
-
- <require idref="lufa.drivers.usb.core.common"/>
- <require idref="lufa.drivers.usb.core.xmega"/>
- </module>
-
- <module type="driver" id="lufa.drivers.usb.core#uc3" caption="LUFA USB Core Driver - UC3">
- <device-support-alias value="lufa_uc3"/>
-
- <info type="gui-flag" value="hidden"/>
-
- <build type="doxygen-entry-point" value="Group_USBManagement_UC3"/>
-
- <require idref="lufa.drivers.usb.core.common"/>
- <require idref="lufa.drivers.usb.core.uc3"/>
- </module>
- </select-by-device>
- </asf>
-</lufa>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Atmel Studio framework integration file --> + +<lufa> + <asf> + <module type="driver" id="lufa.drivers.usb.core.common" caption="LUFA USB Core Driver - Common"> + <device-support-alias value="lufa_avr8"/> + <device-support-alias value="lufa_xmega"/> + <device-support-alias value="lufa_uc3"/> + + <build type="doxygen-entry-point" value="Group_USBManagement"/> + + <info type="gui-flag" value="hidden"/> + + <build type="header-file" value="Drivers/USB/Core/Device.h"/> + <build type="header-file" value="Drivers/USB/Core/Endpoint.h"/> + <build type="header-file" value="Drivers/USB/Core/Host.h"/> + <build type="header-file" value="Drivers/USB/Core/Pipe.h"/> + <build type="header-file" value="Drivers/USB/Core/OTG.h"/> + <build type="header-file" value="Drivers/USB/Core/USBController.h"/> + <build type="header-file" value="Drivers/USB/Core/USBInterrupt.h"/> + <build type="header-file" value="Drivers/USB/Core/EndpointStream.h"/> + <build type="header-file" value="Drivers/USB/Core/PipeStream.h"/> + <build type="c-source" value="Drivers/USB/Core/ConfigDescriptors.c"/> + <build type="header-file" value="Drivers/USB/Core/ConfigDescriptors.h"/> + <build type="c-source" value="Drivers/USB/Core/DeviceStandardReq.c"/> + <build type="header-file" value="Drivers/USB/Core/DeviceStandardReq.h"/> + <build type="c-source" value="Drivers/USB/Core/Events.c"/> + <build type="header-file" value="Drivers/USB/Core/Events.h"/> + <build type="c-source" value="Drivers/USB/Core/HostStandardReq.c"/> + <build type="header-file" value="Drivers/USB/Core/HostStandardReq.h"/> + <build type="c-source" value="Drivers/USB/Core/USBTask.c"/> + <build type="header-file" value="Drivers/USB/Core/USBTask.h"/> + <build type="header-file" value="Drivers/USB/Core/USBMode.h"/> + <build type="header-file" value="Drivers/USB/Core/StdDescriptors.h"/> + <build type="header-file" value="Drivers/USB/Core/StdRequestType.h"/> + + <build type="c-source" value="Drivers/USB/Class/Common/HIDParser.c"/> + <build type="header-file" value="Drivers/USB/Class/Common/HIDParser.h"/> + <build type="header-file" value="Drivers/USB/Class/Common/HIDReportData.h"/> + </module> + + <select-by-device id="lufa.drivers.usb.core" caption="LUFA USB Core Driver"> + <module type="driver" id="lufa.drivers.usb.core#avr8" caption="LUFA USB Core Driver - AVR8"> + <device-support-alias value="lufa_avr8"/> + + <info type="gui-flag" value="hidden"/> + + <build type="doxygen-entry-point" value="Group_USBManagement_AVR8"/> + + <require idref="lufa.drivers.usb.core.common"/> + <require idref="lufa.drivers.usb.core.avr8"/> + </module> + + <module type="driver" id="lufa.drivers.usb.core#xmega" caption="LUFA USB Core Driver - XMEGA"> + <device-support-alias value="lufa_xmega"/> + + <info type="gui-flag" value="hidden"/> + + <build type="doxygen-entry-point" value="Group_USBManagement_XMEGA"/> + + <require idref="lufa.drivers.usb.core.common"/> + <require idref="lufa.drivers.usb.core.xmega"/> + </module> + + <module type="driver" id="lufa.drivers.usb.core#uc3" caption="LUFA USB Core Driver - UC3"> + <device-support-alias value="lufa_uc3"/> + + <info type="gui-flag" value="hidden"/> + + <build type="doxygen-entry-point" value="Group_USBManagement_UC3"/> + + <require idref="lufa.drivers.usb.core.common"/> + <require idref="lufa.drivers.usb.core.uc3"/> + </module> + </select-by-device> + </asf> +</lufa> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_avr8.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_avr8.xml index 166b9257aa..4688f05f91 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_avr8.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_avr8.xml @@ -1,43 +1,43 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Atmel Studio framework integration file -->
-
-<lufa>
- <asf>
- <module type="driver" id="lufa.drivers.usb.core.avr8" caption="LUFA USB Core Driver for AVR8">
- <device-support-alias value="lufa_avr8"/>
-
- <info type="gui-flag" value="hidden"/>
-
- <build type="doxygen-entry-point" value="Group_USBManagement_AVR8"/>
-
- <build type="c-source" value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c"/>
- <build type="c-source" value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c"/>
- <build type="c-source" value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c"/>
- <build type="c-source" value="Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c"/>
- <build type="c-source" value="Drivers/USB/Core/AVR8/Device_AVR8.c"/>
- <build type="header-file" value="Drivers/USB/Core/AVR8/Device_AVR8.h"/>
- <build type="c-source" value="Drivers/USB/Core/AVR8/Endpoint_AVR8.c"/>
- <build type="header-file" value="Drivers/USB/Core/AVR8/Endpoint_AVR8.h"/>
- <build type="c-source" value="Drivers/USB/Core/AVR8/Host_AVR8.c"/>
- <build type="header-file" value="Drivers/USB/Core/AVR8/Host_AVR8.h"/>
- <build type="c-source" value="Drivers/USB/Core/AVR8/Pipe_AVR8.c"/>
- <build type="header-file" value="Drivers/USB/Core/AVR8/Pipe_AVR8.h"/>
- <build type="header-file" value="Drivers/USB/Core/AVR8/OTG_AVR8.h"/>
- <build type="c-source" value="Drivers/USB/Core/AVR8/USBController_AVR8.c"/>
- <build type="header-file" value="Drivers/USB/Core/AVR8/USBController_AVR8.h"/>
- <build type="c-source" value="Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c"/>
- <build type="header-file" value="Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h"/>
- <build type="c-source" value="Drivers/USB/Core/AVR8/EndpointStream_AVR8.c"/>
- <build type="header-file" value="Drivers/USB/Core/AVR8/EndpointStream_AVR8.h"/>
- <build type="c-source" value="Drivers/USB/Core/AVR8/PipeStream_AVR8.c"/>
- <build type="header-file" value="Drivers/USB/Core/AVR8/PipeStream_AVR8.h"/>
- </module>
- </asf>
-</lufa>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Atmel Studio framework integration file --> + +<lufa> + <asf> + <module type="driver" id="lufa.drivers.usb.core.avr8" caption="LUFA USB Core Driver for AVR8"> + <device-support-alias value="lufa_avr8"/> + + <info type="gui-flag" value="hidden"/> + + <build type="doxygen-entry-point" value="Group_USBManagement_AVR8"/> + + <build type="c-source" value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c"/> + <build type="c-source" value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c"/> + <build type="c-source" value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c"/> + <build type="c-source" value="Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c"/> + <build type="c-source" value="Drivers/USB/Core/AVR8/Device_AVR8.c"/> + <build type="header-file" value="Drivers/USB/Core/AVR8/Device_AVR8.h"/> + <build type="c-source" value="Drivers/USB/Core/AVR8/Endpoint_AVR8.c"/> + <build type="header-file" value="Drivers/USB/Core/AVR8/Endpoint_AVR8.h"/> + <build type="c-source" value="Drivers/USB/Core/AVR8/Host_AVR8.c"/> + <build type="header-file" value="Drivers/USB/Core/AVR8/Host_AVR8.h"/> + <build type="c-source" value="Drivers/USB/Core/AVR8/Pipe_AVR8.c"/> + <build type="header-file" value="Drivers/USB/Core/AVR8/Pipe_AVR8.h"/> + <build type="header-file" value="Drivers/USB/Core/AVR8/OTG_AVR8.h"/> + <build type="c-source" value="Drivers/USB/Core/AVR8/USBController_AVR8.c"/> + <build type="header-file" value="Drivers/USB/Core/AVR8/USBController_AVR8.h"/> + <build type="c-source" value="Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c"/> + <build type="header-file" value="Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h"/> + <build type="c-source" value="Drivers/USB/Core/AVR8/EndpointStream_AVR8.c"/> + <build type="header-file" value="Drivers/USB/Core/AVR8/EndpointStream_AVR8.h"/> + <build type="c-source" value="Drivers/USB/Core/AVR8/PipeStream_AVR8.c"/> + <build type="header-file" value="Drivers/USB/Core/AVR8/PipeStream_AVR8.h"/> + </module> + </asf> +</lufa> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_uc3.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_uc3.xml index 7e0540cda7..2e7185f24a 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_uc3.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_uc3.xml @@ -1,42 +1,42 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Atmel Studio framework integration file -->
-
-<lufa>
- <asf>
- <module type="driver" id="lufa.drivers.usb.core.uc3" caption="LUFA USB Core Driver for UC3">
- <device-support-alias value="lufa_uc3"/>
-
- <info type="gui-flag" value="hidden"/>
-
- <build type="doxygen-entry-point" value="Group_USBManagement_UC3"/>
-
- <build type="c-source" value="Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_R.c"/>
- <build type="c-source" value="Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_W.c"/>
- <build type="c-source" value="Drivers/USB/Core/UC3/Template/Template_Endpoint_RW.c"/>
- <build type="c-source" value="Drivers/USB/Core/UC3/Template/Template_Pipe_RW.c"/>
- <build type="c-source" value="Drivers/USB/Core/UC3/Device_UC3.c"/>
- <build type="header-file" value="Drivers/USB/Core/UC3/Device_UC3.h"/>
- <build type="c-source" value="Drivers/USB/Core/UC3/Endpoint_UC3.c"/>
- <build type="header-file" value="Drivers/USB/Core/UC3/Endpoint_UC3.h"/>
- <build type="c-source" value="Drivers/USB/Core/UC3/Host_UC3.c"/>
- <build type="header-file" value="Drivers/USB/Core/UC3/Host_UC3.h"/>
- <build type="c-source" value="Drivers/USB/Core/UC3/Pipe_UC3.c"/>
- <build type="header-file" value="Drivers/USB/Core/UC3/Pipe_UC3.h"/>
- <build type="c-source" value="Drivers/USB/Core/UC3/USBController_UC3.c"/>
- <build type="header-file" value="Drivers/USB/Core/UC3/USBController_UC3.h"/>
- <build type="c-source" value="Drivers/USB/Core/UC3/USBInterrupt_UC3.c"/>
- <build type="header-file" value="Drivers/USB/Core/UC3/USBInterrupt_UC3.h"/>
- <build type="c-source" value="Drivers/USB/Core/UC3/EndpointStream_UC3.c"/>
- <build type="header-file" value="Drivers/USB/Core/UC3/EndpointStream_UC3.h"/>
- <build type="c-source" value="Drivers/USB/Core/UC3/PipeStream_UC3.c"/>
- <build type="header-file" value="Drivers/USB/Core/UC3/PipeStream_UC3.h"/>
- </module>
- </asf>
-</lufa>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Atmel Studio framework integration file --> + +<lufa> + <asf> + <module type="driver" id="lufa.drivers.usb.core.uc3" caption="LUFA USB Core Driver for UC3"> + <device-support-alias value="lufa_uc3"/> + + <info type="gui-flag" value="hidden"/> + + <build type="doxygen-entry-point" value="Group_USBManagement_UC3"/> + + <build type="c-source" value="Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_R.c"/> + <build type="c-source" value="Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_W.c"/> + <build type="c-source" value="Drivers/USB/Core/UC3/Template/Template_Endpoint_RW.c"/> + <build type="c-source" value="Drivers/USB/Core/UC3/Template/Template_Pipe_RW.c"/> + <build type="c-source" value="Drivers/USB/Core/UC3/Device_UC3.c"/> + <build type="header-file" value="Drivers/USB/Core/UC3/Device_UC3.h"/> + <build type="c-source" value="Drivers/USB/Core/UC3/Endpoint_UC3.c"/> + <build type="header-file" value="Drivers/USB/Core/UC3/Endpoint_UC3.h"/> + <build type="c-source" value="Drivers/USB/Core/UC3/Host_UC3.c"/> + <build type="header-file" value="Drivers/USB/Core/UC3/Host_UC3.h"/> + <build type="c-source" value="Drivers/USB/Core/UC3/Pipe_UC3.c"/> + <build type="header-file" value="Drivers/USB/Core/UC3/Pipe_UC3.h"/> + <build type="c-source" value="Drivers/USB/Core/UC3/USBController_UC3.c"/> + <build type="header-file" value="Drivers/USB/Core/UC3/USBController_UC3.h"/> + <build type="c-source" value="Drivers/USB/Core/UC3/USBInterrupt_UC3.c"/> + <build type="header-file" value="Drivers/USB/Core/UC3/USBInterrupt_UC3.h"/> + <build type="c-source" value="Drivers/USB/Core/UC3/EndpointStream_UC3.c"/> + <build type="header-file" value="Drivers/USB/Core/UC3/EndpointStream_UC3.h"/> + <build type="c-source" value="Drivers/USB/Core/UC3/PipeStream_UC3.c"/> + <build type="header-file" value="Drivers/USB/Core/UC3/PipeStream_UC3.h"/> + </module> + </asf> +</lufa> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_xmega.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_xmega.xml index 9e9f4f6a1d..c79a0f5b52 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_xmega.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_xmega.xml @@ -1,36 +1,36 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Atmel Studio framework integration file -->
-
-<lufa>
- <asf>
- <module type="driver" id="lufa.drivers.usb.core.xmega" caption="LUFA USB Core Driver for XMEGA">
- <device-support-alias value="lufa_xmega"/>
-
- <info type="gui-flag" value="hidden"/>
-
- <build type="doxygen-entry-point" value="Group_USBManagement_XMEGA"/>
-
- <build type="c-source" value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c"/>
- <build type="c-source" value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c"/>
- <build type="c-source" value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c"/>
- <build type="c-source" value="Drivers/USB/Core/XMEGA/Device_XMEGA.c"/>
- <build type="header-file" value="Drivers/USB/Core/XMEGA/Device_XMEGA.h"/>
- <build type="c-source" value="Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c"/>
- <build type="header-file" value="Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h"/>
- <build type="c-source" value="Drivers/USB/Core/XMEGA/Pipe_XMEGA.c"/>
- <build type="c-source" value="Drivers/USB/Core/XMEGA/USBController_XMEGA.c"/>
- <build type="header-file" value="Drivers/USB/Core/XMEGA/USBController_XMEGA.h"/>
- <build type="c-source" value="Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c"/>
- <build type="header-file" value="Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h"/>
- <build type="c-source" value="Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c"/>
- <build type="header-file" value="Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h"/>
- </module>
- </asf>
-</lufa>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Atmel Studio framework integration file --> + +<lufa> + <asf> + <module type="driver" id="lufa.drivers.usb.core.xmega" caption="LUFA USB Core Driver for XMEGA"> + <device-support-alias value="lufa_xmega"/> + + <info type="gui-flag" value="hidden"/> + + <build type="doxygen-entry-point" value="Group_USBManagement_XMEGA"/> + + <build type="c-source" value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c"/> + <build type="c-source" value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c"/> + <build type="c-source" value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c"/> + <build type="c-source" value="Drivers/USB/Core/XMEGA/Device_XMEGA.c"/> + <build type="header-file" value="Drivers/USB/Core/XMEGA/Device_XMEGA.h"/> + <build type="c-source" value="Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c"/> + <build type="header-file" value="Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h"/> + <build type="c-source" value="Drivers/USB/Core/XMEGA/Pipe_XMEGA.c"/> + <build type="c-source" value="Drivers/USB/Core/XMEGA/USBController_XMEGA.c"/> + <build type="header-file" value="Drivers/USB/Core/XMEGA/USBController_XMEGA.h"/> + <build type="c-source" value="Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c"/> + <build type="header-file" value="Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h"/> + <build type="c-source" value="Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c"/> + <build type="header-file" value="Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h"/> + </module> + </asf> +</lufa> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform.xml index 02c7463ee5..4ee51f6ee0 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform.xml @@ -1,60 +1,60 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Atmel Studio framework integration file -->
-
-<lufa>
- <asf>
- <select-by-device id="lufa.platform" caption="LUFA Platform Specific Support">
- <module type="service" id="lufa.platform#avr8" caption="LUFA Platform Specific Support - AVR8">
- <device-support-alias value="lufa_avr8"/>
-
- <build type="define" name="ARCH" value="ARCH_AVR8"/>
-
- <build type="doxygen-entry-point" value="Group_PlatformDrivers"/>
-
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Platform/Platform.h"/>
-
- <require idref="lufa.common"/>
- </module>
-
- <module type="service" id="lufa.platform#xmega" caption="LUFA Platform Specific Support - XMEGA">
- <device-support-alias value="lufa_xmega"/>
-
- <build type="define" name="ARCH" value="ARCH_XMEGA"/>
-
- <build type="doxygen-entry-point" value="Group_PlatformDrivers"/>
-
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Platform/Platform.h"/>
-
- <build type="distribute" value="Platform/XMEGA/XMEGAExperimentalInfo.txt" subtype="license"/>
-
- <require idref="lufa.platform.xmega"/>
- <require idref="lufa.common"/>
- </module>
-
- <module type="service" id="lufa.platform#uc3" caption="LUFA Platform Specific Support - UC3">
- <device-support-alias value="lufa_uc3"/>
-
- <build type="define" name="ARCH" value="ARCH_UC3"/>
-
- <build type="doxygen-entry-point" value="Group_PlatformDrivers"/>
-
- <build type="include-path" value=".."/>
- <build type="header-file" subtype="api" value="Platform/Platform.h"/>
-
- <build type="distribute" value="Platform/UC3/UC3ExperimentalInfo.txt" subtype="license"/>
-
- <require idref="lufa.platform.uc3"/>
- <require idref="lufa.common"/>
- </module>
- </select-by-device>
- </asf>
-</lufa>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Atmel Studio framework integration file --> + +<lufa> + <asf> + <select-by-device id="lufa.platform" caption="LUFA Platform Specific Support"> + <module type="service" id="lufa.platform#avr8" caption="LUFA Platform Specific Support - AVR8"> + <device-support-alias value="lufa_avr8"/> + + <build type="define" name="ARCH" value="ARCH_AVR8"/> + + <build type="doxygen-entry-point" value="Group_PlatformDrivers"/> + + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Platform/Platform.h"/> + + <require idref="lufa.common"/> + </module> + + <module type="service" id="lufa.platform#xmega" caption="LUFA Platform Specific Support - XMEGA"> + <device-support-alias value="lufa_xmega"/> + + <build type="define" name="ARCH" value="ARCH_XMEGA"/> + + <build type="doxygen-entry-point" value="Group_PlatformDrivers"/> + + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Platform/Platform.h"/> + + <build type="distribute" value="Platform/XMEGA/XMEGAExperimentalInfo.txt" subtype="license"/> + + <require idref="lufa.platform.xmega"/> + <require idref="lufa.common"/> + </module> + + <module type="service" id="lufa.platform#uc3" caption="LUFA Platform Specific Support - UC3"> + <device-support-alias value="lufa_uc3"/> + + <build type="define" name="ARCH" value="ARCH_UC3"/> + + <build type="doxygen-entry-point" value="Group_PlatformDrivers"/> + + <build type="include-path" value=".."/> + <build type="header-file" subtype="api" value="Platform/Platform.h"/> + + <build type="distribute" value="Platform/UC3/UC3ExperimentalInfo.txt" subtype="license"/> + + <require idref="lufa.platform.uc3"/> + <require idref="lufa.common"/> + </module> + </select-by-device> + </asf> +</lufa> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_uc3.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_uc3.xml index a488c4b83d..98017b08ad 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_uc3.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_uc3.xml @@ -1,26 +1,26 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Atmel Studio framework integration file -->
-
-<lufa>
- <asf>
- <module type="driver" id="lufa.platform.uc3" caption="LUFA UC3 Platform Drivers">
- <device-support-alias value="lufa_uc3"/>
-
- <info type="gui-flag" value="hidden"/>
-
- <build type="doxygen-entry-point" value="Group_PlatformDrivers_UC3"/>
-
- <build type="header-file" value="Platform/UC3/ClockManagement.h"/>
- <build type="header-file" value="Platform/UC3/InterruptManagement.h"/>
- <build type="c-source" value="Platform/UC3/InterruptManagement.c"/>
- <build type="asm-source" value="Platform/UC3/Exception.S"/>
- </module>
- </asf>
-</lufa>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Atmel Studio framework integration file --> + +<lufa> + <asf> + <module type="driver" id="lufa.platform.uc3" caption="LUFA UC3 Platform Drivers"> + <device-support-alias value="lufa_uc3"/> + + <info type="gui-flag" value="hidden"/> + + <build type="doxygen-entry-point" value="Group_PlatformDrivers_UC3"/> + + <build type="header-file" value="Platform/UC3/ClockManagement.h"/> + <build type="header-file" value="Platform/UC3/InterruptManagement.h"/> + <build type="c-source" value="Platform/UC3/InterruptManagement.c"/> + <build type="asm-source" value="Platform/UC3/Exception.S"/> + </module> + </asf> +</lufa> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_xmega.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_xmega.xml index 1674a77b02..e613fe5206 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_xmega.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_xmega.xml @@ -1,23 +1,23 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Atmel Studio framework integration file -->
-
-<lufa>
- <asf xmlversion="1.0">
- <module type="driver" id="lufa.platform.xmega" caption="LUFA XMEGA Platform Drivers">
- <device-support-alias value="lufa_xmega"/>
-
- <info type="gui-flag" value="hidden"/>
-
- <build type="doxygen-entry-point" value="Group_PlatformDrivers_XMEGA"/>
-
- <build type="header-file" value="Platform/XMEGA/ClockManagement.h"/>
- </module>
- </asf>
-</lufa>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Atmel Studio framework integration file --> + +<lufa> + <asf xmlversion="1.0"> + <module type="driver" id="lufa.platform.xmega" caption="LUFA XMEGA Platform Drivers"> + <device-support-alias value="lufa_xmega"/> + + <info type="gui-flag" value="hidden"/> + + <build type="doxygen-entry-point" value="Group_PlatformDrivers_XMEGA"/> + + <build type="header-file" value="Platform/XMEGA/ClockManagement.h"/> + </module> + </asf> +</lufa> diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_toolchain.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_toolchain.xml index 031c8a2be6..a76b6d0d3b 100644 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_toolchain.xml +++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_toolchain.xml @@ -1,43 +1,43 @@ -<!--
- LUFA Library
- Copyright (C) Dean Camera, 2013.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
--->
-
-<!-- Atmel Studio framework integration file -->
-
-<lufa>
- <asf>
- <select-by-device id="common.utils.toolchain_config" caption="Toolchain configuration defaults">
- <module type="build-specific" id="common.utils.toolchain_config#avr" caption="Toolchain configuration defaults for 8-bit AVR">
- <info type="gui-flag" value="hidden"/>
- <device-support value="avr"/>
-
- <toolchain-config name="avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned" value="True" toolchain="avrgcc"/>
- <toolchain-config name="avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned" value="True" toolchain="avrgcc"/>
- <toolchain-config name="avrgcc.compiler.optimization.OtherFlags" value="-fdata-sections" toolchain="avrgcc"/>
- <toolchain-config name="avrgcc.compiler.optimization.PrepareFunctionsForGarbageCollection" value="True" toolchain="avrgcc"/>
- <toolchain-config name="avrgcc.compiler.warnings.AllWarnings" value="True" toolchain="avrgcc"/>
- <toolchain-config name="avrgcc.compiler.miscellaneous.OtherFlags" value="-mrelax -std=gnu99 -fno-strict-aliasing -fno-jump-tables" toolchain="avrgcc"/>
- <toolchain-config name="avrgcc.linker.optimization.GarbageCollectUnusedSections" value="True" toolchain="avrgcc"/>
- <toolchain-config name="avrgcc.linker.optimization.RelaxBranches" value="True" toolchain="avrgcc"/>
- </module>
- </select-by-device>
-
- <module type="build-specific" id="common.utils.toolchain_config#uc3" caption="Toolchain configuration defaults for 32-bit AVR">
- <info type="gui-flag" value="hidden"/>
- <device-support value="uc3"/>
-
- <toolchain-config name="avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned" value="True" toolchain="avr32gcc"/>
- <toolchain-config name="avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned" value="True" toolchain="avr32gcc"/>
- <toolchain-config name="avr32gcc.compiler.optimization.OtherFlags" value="-fdata-sections" toolchain="avr32gcc"/>
- <toolchain-config name="avr32gcc.compiler.optimization.PrepareFunctionsForGarbageCollection" value="True" toolchain="avr32gcc"/>
- <toolchain-config name="avr32gcc.compiler.warnings.AllWarnings" value="True" toolchain="avr32gcc"/>
- <toolchain-config name="avr32gcc.compiler.miscellaneous.OtherFlags" value="-mrelax -std=gnu99 -fno-strict-aliasing -mno-cond-exec-before-reload" toolchain="avr32gcc"/>
- <toolchain-config name="avr32gcc.linker.optimization.GarbageCollectUnusedSections" value="True" toolchain="avr32gcc"/>
- <toolchain-config name="avr32gcc.linker.optimization.RelaxBranches" value="True" toolchain="avr32gcc"/>
- </module>
- </asf>
-</lufa>
+<!-- + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +--> + +<!-- Atmel Studio framework integration file --> + +<lufa> + <asf> + <select-by-device id="common.utils.toolchain_config" caption="Toolchain configuration defaults"> + <module type="build-specific" id="common.utils.toolchain_config#avr" caption="Toolchain configuration defaults for 8-bit AVR"> + <info type="gui-flag" value="hidden"/> + <device-support value="avr"/> + + <toolchain-config name="avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned" value="True" toolchain="avrgcc"/> + <toolchain-config name="avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned" value="True" toolchain="avrgcc"/> + <toolchain-config name="avrgcc.compiler.optimization.OtherFlags" value="-fdata-sections" toolchain="avrgcc"/> + <toolchain-config name="avrgcc.compiler.optimization.PrepareFunctionsForGarbageCollection" value="True" toolchain="avrgcc"/> + <toolchain-config name="avrgcc.compiler.warnings.AllWarnings" value="True" toolchain="avrgcc"/> + <toolchain-config name="avrgcc.compiler.miscellaneous.OtherFlags" value="-mrelax -std=gnu99 -fno-strict-aliasing -fno-jump-tables" toolchain="avrgcc"/> + <toolchain-config name="avrgcc.linker.optimization.GarbageCollectUnusedSections" value="True" toolchain="avrgcc"/> + <toolchain-config name="avrgcc.linker.optimization.RelaxBranches" value="True" toolchain="avrgcc"/> + </module> + </select-by-device> + + <module type="build-specific" id="common.utils.toolchain_config#uc3" caption="Toolchain configuration defaults for 32-bit AVR"> + <info type="gui-flag" value="hidden"/> + <device-support value="uc3"/> + + <toolchain-config name="avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned" value="True" toolchain="avr32gcc"/> + <toolchain-config name="avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned" value="True" toolchain="avr32gcc"/> + <toolchain-config name="avr32gcc.compiler.optimization.OtherFlags" value="-fdata-sections" toolchain="avr32gcc"/> + <toolchain-config name="avr32gcc.compiler.optimization.PrepareFunctionsForGarbageCollection" value="True" toolchain="avr32gcc"/> + <toolchain-config name="avr32gcc.compiler.warnings.AllWarnings" value="True" toolchain="avr32gcc"/> + <toolchain-config name="avr32gcc.compiler.miscellaneous.OtherFlags" value="-mrelax -std=gnu99 -fno-strict-aliasing -mno-cond-exec-before-reload" toolchain="avr32gcc"/> + <toolchain-config name="avr32gcc.linker.optimization.GarbageCollectUnusedSections" value="True" toolchain="avr32gcc"/> + <toolchain-config name="avr32gcc.linker.optimization.RelaxBranches" value="True" toolchain="avr32gcc"/> + </module> + </asf> +</lufa> diff --git a/tmk_core/protocol/midi/Config/LUFAConfig.h b/tmk_core/protocol/midi/Config/LUFAConfig.h index fa9404498f..a1d7482672 100755 --- a/tmk_core/protocol/midi/Config/LUFAConfig.h +++ b/tmk_core/protocol/midi/Config/LUFAConfig.h @@ -1,93 +1,93 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief LUFA Library Configuration Header File
- *
- * This header file is used to configure LUFA's compile time options,
- * as an alternative to the compile time constants supplied through
- * a makefile.
- *
- * For information on what each token does, refer to the LUFA
- * manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
- #if (ARCH == ARCH_AVR8)
-
- /* Non-USB Related Configuration Tokens: */
-// #define DISABLE_TERMINAL_CODES
-
- /* USB Class Driver Related Tokens: */
-// #define HID_HOST_BOOT_PROTOCOL_ONLY
-// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
-// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
-// #define HID_MAX_COLLECTIONS {Insert Value Here}
-// #define HID_MAX_REPORTITEMS {Insert Value Here}
-// #define HID_MAX_REPORT_IDS {Insert Value Here}
-// #define NO_CLASS_DRIVER_AUTOFLUSH
-
- /* General USB Driver Related Tokens: */
-// #define ORDERED_EP_CONFIG
- #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
- #define USB_DEVICE_ONLY
-// #define USB_HOST_ONLY
-// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
-// #define NO_LIMITED_CONTROLLER_CONNECT
-// #define NO_SOF_EVENTS
-
- /* USB Device Mode Driver Related Tokens: */
-// #define USE_RAM_DESCRIPTORS
- #define USE_FLASH_DESCRIPTORS
-// #define USE_EEPROM_DESCRIPTORS
-// #define NO_INTERNAL_SERIAL
- #define FIXED_CONTROL_ENDPOINT_SIZE 8
-// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
- #define FIXED_NUM_CONFIGURATIONS 1
-// #define CONTROL_ONLY_DEVICE
-// #define INTERRUPT_CONTROL_ENDPOINT
-// #define NO_DEVICE_REMOTE_WAKEUP
-// #define NO_DEVICE_SELF_POWER
-
- /* USB Host Mode Driver Related Tokens: */
-// #define HOST_STATE_AS_GPIOR {Insert Value Here}
-// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
-// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
-// #define NO_AUTO_VBUS_MANAGEMENT
-// #define INVERTED_VBUS_ENABLE_LINE
-
- #else
-
- #error Unsupported architecture for this LUFA configuration file.
-
- #endif
-#endif
+/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/tmk_core/tool/chibios/ch-bootloader-jump.patch b/tmk_core/tool/chibios/ch-bootloader-jump.patch index d886576214..c6eb2405c9 100644 --- a/tmk_core/tool/chibios/ch-bootloader-jump.patch +++ b/tmk_core/tool/chibios/ch-bootloader-jump.patch @@ -3,114 +3,114 @@ index 51a79bb..42d07bd 100644 --- a/os/common/ports/ARMCMx/compilers/GCC/crt0_v6m.s +++ b/os/common/ports/ARMCMx/compilers/GCC/crt0_v6m.s @@ -105,6 +105,13 @@ - #define CRT0_CALL_DESTRUCTORS TRUE
- #endif
-
-+/**
-+ * @brief Magic number for jumping to bootloader.
-+ */
-+#if !defined(MAGIC_BOOTLOADER_NUMBER) || defined(__DOXYGEN__)
-+#define MAGIC_BOOTLOADER_NUMBER 0xDEADBEEF
-+#endif
-+
- /*===========================================================================*/
- /* Code section. */
- /*===========================================================================*/
+ #define CRT0_CALL_DESTRUCTORS TRUE + #endif + ++/** ++ * @brief Magic number for jumping to bootloader. ++ */ ++#if !defined(MAGIC_BOOTLOADER_NUMBER) || defined(__DOXYGEN__) ++#define MAGIC_BOOTLOADER_NUMBER 0xDEADBEEF ++#endif ++ + /*===========================================================================*/ + /* Code section. */ + /*===========================================================================*/ @@ -124,6 +131,17 @@ - .thumb_func
- .global Reset_Handler
- Reset_Handler:
-+
-+#ifdef STM32_BOOTLOADER_ADDRESS
-+ /* jump to bootloader code */
-+ ldr r0, =__ram0_end__-4
-+ ldr r1, =MAGIC_BOOTLOADER_NUMBER
-+ ldr r2, [r0, #0]
-+ str r0, [r0, #0] /* erase stored magic */
-+ cmp r2, r1
-+ beq Bootloader_Jump
-+#endif /* STM32_BOOTLOADER_ADDRESS */
-+
- /* Interrupts are globally masked initially.*/
- cpsid i
-
+ .thumb_func + .global Reset_Handler + Reset_Handler: ++ ++#ifdef STM32_BOOTLOADER_ADDRESS ++ /* jump to bootloader code */ ++ ldr r0, =__ram0_end__-4 ++ ldr r1, =MAGIC_BOOTLOADER_NUMBER ++ ldr r2, [r0, #0] ++ str r0, [r0, #0] /* erase stored magic */ ++ cmp r2, r1 ++ beq Bootloader_Jump ++#endif /* STM32_BOOTLOADER_ADDRESS */ ++ + /* Interrupts are globally masked initially.*/ + cpsid i + @@ -242,6 +260,21 @@ endfiniloop: - ldr r1, =__default_exit
- bx r1
-
-+#ifdef STM32_BOOTLOADER_ADDRESS
-+/*
-+ * Jump-to-bootloader function.
-+ */
-+
-+ .align 2
-+ .thumb_func
-+Bootloader_Jump:
-+ ldr r0, =STM32_BOOTLOADER_ADDRESS
-+ ldr r1, [r0, #0]
-+ mov sp, r1
-+ ldr r0, [r0, #4]
-+ bx r0
-+#endif /* STM32_BOOTLOADER_ADDRESS */
-+
- #endif
-
- /** @} */
+ ldr r1, =__default_exit + bx r1 + ++#ifdef STM32_BOOTLOADER_ADDRESS ++/* ++ * Jump-to-bootloader function. ++ */ ++ ++ .align 2 ++ .thumb_func ++Bootloader_Jump: ++ ldr r0, =STM32_BOOTLOADER_ADDRESS ++ ldr r1, [r0, #0] ++ mov sp, r1 ++ ldr r0, [r0, #4] ++ bx r0 ++#endif /* STM32_BOOTLOADER_ADDRESS */ ++ + #endif + + /** @} */ diff --git a/os/common/ports/ARMCMx/compilers/GCC/crt0_v7m.s b/os/common/ports/ARMCMx/compilers/GCC/crt0_v7m.s index 4812a29..dca9f88 100644 --- a/os/common/ports/ARMCMx/compilers/GCC/crt0_v7m.s +++ b/os/common/ports/ARMCMx/compilers/GCC/crt0_v7m.s @@ -140,6 +140,13 @@ - #define CRT0_CPACR_INIT 0x00F00000
- #endif
-
-+/**
-+ * @brief Magic number for jumping to bootloader.
-+ */
-+#if !defined(MAGIC_BOOTLOADER_NUMBER) || defined(__DOXYGEN__)
-+#define MAGIC_BOOTLOADER_NUMBER 0xDEADBEEF
-+#endif
-+
- /*===========================================================================*/
- /* Code section. */
- /*===========================================================================*/
+ #define CRT0_CPACR_INIT 0x00F00000 + #endif + ++/** ++ * @brief Magic number for jumping to bootloader. ++ */ ++#if !defined(MAGIC_BOOTLOADER_NUMBER) || defined(__DOXYGEN__) ++#define MAGIC_BOOTLOADER_NUMBER 0xDEADBEEF ++#endif ++ + /*===========================================================================*/ + /* Code section. */ + /*===========================================================================*/ @@ -164,6 +171,17 @@ - .thumb_func
- .global Reset_Handler
- Reset_Handler:
-+
-+#ifdef STM32_BOOTLOADER_ADDRESS
-+ /* jump to bootloader code */
-+ ldr r0, =__ram0_end__-4
-+ ldr r1, =MAGIC_BOOTLOADER_NUMBER
-+ ldr r2, [r0, #0]
-+ str r0, [r0, #0] /* erase stored magic */
-+ cmp r2, r1
-+ beq Bootloader_Jump
-+#endif /* STM32_BOOTLOADER_ADDRESS */
-+
- /* Interrupts are globally masked initially.*/
- cpsid i
-
+ .thumb_func + .global Reset_Handler + Reset_Handler: ++ ++#ifdef STM32_BOOTLOADER_ADDRESS ++ /* jump to bootloader code */ ++ ldr r0, =__ram0_end__-4 ++ ldr r1, =MAGIC_BOOTLOADER_NUMBER ++ ldr r2, [r0, #0] ++ str r0, [r0, #0] /* erase stored magic */ ++ cmp r2, r1 ++ beq Bootloader_Jump ++#endif /* STM32_BOOTLOADER_ADDRESS */ ++ + /* Interrupts are globally masked initially.*/ + cpsid i + @@ -305,6 +323,21 @@ endfiniloop: - /* Branching to the defined exit handler.*/
- b __default_exit
-
-+#ifdef STM32_BOOTLOADER_ADDRESS
-+/*
-+ * Jump-to-bootloader function.
-+ */
-+
-+ .align 2
-+ .thumb_func
-+Bootloader_Jump:
-+ ldr r0, =STM32_BOOTLOADER_ADDRESS
-+ ldr r1, [r0, #0]
-+ mov sp, r1
-+ ldr r0, [r0, #4]
-+ bx r0
-+#endif /* STM32_BOOTLOADER_ADDRESS */
-+
- #endif /* !defined(__DOXYGEN__) */
-
- /** @} */
+ /* Branching to the defined exit handler.*/ + b __default_exit + ++#ifdef STM32_BOOTLOADER_ADDRESS ++/* ++ * Jump-to-bootloader function. ++ */ ++ ++ .align 2 ++ .thumb_func ++Bootloader_Jump: ++ ldr r0, =STM32_BOOTLOADER_ADDRESS ++ ldr r1, [r0, #0] ++ mov sp, r1 ++ ldr r0, [r0, #4] ++ bx r0 ++#endif /* STM32_BOOTLOADER_ADDRESS */ ++ + #endif /* !defined(__DOXYGEN__) */ + + /** @} */ |