summaryrefslogtreecommitdiff
path: root/tmk_core/protocol/lufa
diff options
context:
space:
mode:
Diffstat (limited to 'tmk_core/protocol/lufa')
-rw-r--r--tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml322
-rw-r--r--tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml312
-rw-r--r--tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml246
-rw-r--r--tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S204
-rw-r--r--tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml312
-rw-r--r--tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile136
-rw-r--r--tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S182
-rw-r--r--tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml318
-rw-r--r--tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile110
-rw-r--r--tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile84
-rw-r--r--tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml110
-rw-r--r--tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml82
-rw-r--r--tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt1950
13 files changed, 2184 insertions, 2184 deletions
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml
index 72f3ff04c7..02e7063c66 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml
@@ -1,161 +1,161 @@
-<asf xmlversion="1.0">
- <project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">
- <require idref="lufa.bootloaders.cdc"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="at90usb1287"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">
- <require idref="lufa.bootloaders.cdc"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="at90usb647"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0xF000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">
- <require idref="lufa.bootloaders.cdc"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="atmega32u4"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">
- <require idref="lufa.bootloaders.cdc"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="atmega16u2"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x3000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">
- <require idref="lufa.bootloaders.cdc"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="atmega8u2"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x1000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">
- <info type="description" value="summary">
- CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.
- </info>
-
- <info type="gui-flag" value="move-to-root"/>
-
- <info type="keyword" value="Technology">
- <keyword value="Bootloaders"/>
- <keyword value="USB Device"/>
- </info>
-
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="include-path" value="."/>
- <build type="c-source" value="BootloaderCDC.c"/>
- <build type="header-file" value="BootloaderCDC.h"/>
- <build type="c-source" value="Descriptors.c"/>
- <build type="header-file" value="Descriptors.h"/>
- <build type="c-source" value="BootloaderAPI.c"/>
- <build type="header-file" value="BootloaderAPI.h"/>
- <build type="asm-source" value="BootloaderAPITable.S"/>
-
- <build type="module-config" subtype="path" value="Config"/>
- <build type="header-file" value="Config/LUFAConfig.h"/>
- <build type="header-file" value="Config/AppConfig.h"/>
-
- <build type="distribute" subtype="user-file" value="doxyfile"/>
- <build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>
- <build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>
-
- <require idref="lufa.common"/>
- <require idref="lufa.platform"/>
- <require idref="lufa.drivers.usb"/>
- <require idref="lufa.drivers.board"/>
- <require idref="lufa.drivers.board.leds"/>
- </module>
-</asf>
+<asf xmlversion="1.0">
+ <project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">
+ <require idref="lufa.bootloaders.cdc"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb1287"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">
+ <require idref="lufa.bootloaders.cdc"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb647"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">
+ <require idref="lufa.bootloaders.cdc"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega32u4"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">
+ <require idref="lufa.bootloaders.cdc"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega16u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">
+ <require idref="lufa.bootloaders.cdc"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega8u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">
+ <info type="description" value="summary">
+ CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.
+ </info>
+
+ <info type="gui-flag" value="move-to-root"/>
+
+ <info type="keyword" value="Technology">
+ <keyword value="Bootloaders"/>
+ <keyword value="USB Device"/>
+ </info>
+
+ <device-support-alias value="lufa_avr8"/>
+ <device-support-alias value="lufa_xmega"/>
+ <device-support-alias value="lufa_uc3"/>
+
+ <build type="include-path" value="."/>
+ <build type="c-source" value="BootloaderCDC.c"/>
+ <build type="header-file" value="BootloaderCDC.h"/>
+ <build type="c-source" value="Descriptors.c"/>
+ <build type="header-file" value="Descriptors.h"/>
+ <build type="c-source" value="BootloaderAPI.c"/>
+ <build type="header-file" value="BootloaderAPI.h"/>
+ <build type="asm-source" value="BootloaderAPITable.S"/>
+
+ <build type="module-config" subtype="path" value="Config"/>
+ <build type="header-file" value="Config/LUFAConfig.h"/>
+ <build type="header-file" value="Config/AppConfig.h"/>
+
+ <build type="distribute" subtype="user-file" value="doxyfile"/>
+ <build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>
+ <build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>
+
+ <require idref="lufa.common"/>
+ <require idref="lufa.platform"/>
+ <require idref="lufa.drivers.usb"/>
+ <require idref="lufa.drivers.board"/>
+ <require idref="lufa.drivers.board.leds"/>
+ </module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml
index 6f3312b764..f56aba69f5 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml
@@ -1,156 +1,156 @@
-<asf xmlversion="1.0">
- <project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">
- <require idref="lufa.bootloaders.dfu"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="at90usb1287"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">
- <require idref="lufa.bootloaders.dfu"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="at90usb647"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0xF000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">
- <require idref="lufa.bootloaders.dfu"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="atmega32u4"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">
- <require idref="lufa.bootloaders.dfu"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="atmega16u2"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x3000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">
- <require idref="lufa.bootloaders.dfu"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="atmega8u2"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x1000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">
- <info type="description" value="summary">
- DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.
- </info>
-
- <info type="gui-flag" value="move-to-root"/>
-
- <info type="keyword" value="Technology">
- <keyword value="Bootloaders"/>
- <keyword value="USB Device"/>
- </info>
-
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="include-path" value="."/>
- <build type="c-source" value="BootloaderDFU.c"/>
- <build type="header-file" value="BootloaderDFU.h"/>
- <build type="c-source" value="Descriptors.c"/>
- <build type="header-file" value="Descriptors.h"/>
- <build type="c-source" value="BootloaderAPI.c"/>
- <build type="header-file" value="BootloaderAPI.h"/>
- <build type="asm-source" value="BootloaderAPITable.S"/>
-
- <build type="module-config" subtype="path" value="Config"/>
- <build type="header-file" value="Config/LUFAConfig.h"/>
- <build type="header-file" value="Config/AppConfig.h"/>
-
- <build type="distribute" subtype="user-file" value="doxyfile"/>
- <build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>
-
- <require idref="lufa.common"/>
- <require idref="lufa.platform"/>
- <require idref="lufa.drivers.usb"/>
- <require idref="lufa.drivers.board"/>
- <require idref="lufa.drivers.board.leds"/>
- </module>
-</asf>
+<asf xmlversion="1.0">
+ <project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">
+ <require idref="lufa.bootloaders.dfu"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb1287"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">
+ <require idref="lufa.bootloaders.dfu"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb647"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">
+ <require idref="lufa.bootloaders.dfu"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega32u4"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">
+ <require idref="lufa.bootloaders.dfu"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega16u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">
+ <require idref="lufa.bootloaders.dfu"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega8u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">
+ <info type="description" value="summary">
+ DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.
+ </info>
+
+ <info type="gui-flag" value="move-to-root"/>
+
+ <info type="keyword" value="Technology">
+ <keyword value="Bootloaders"/>
+ <keyword value="USB Device"/>
+ </info>
+
+ <device-support-alias value="lufa_avr8"/>
+ <device-support-alias value="lufa_xmega"/>
+ <device-support-alias value="lufa_uc3"/>
+
+ <build type="include-path" value="."/>
+ <build type="c-source" value="BootloaderDFU.c"/>
+ <build type="header-file" value="BootloaderDFU.h"/>
+ <build type="c-source" value="Descriptors.c"/>
+ <build type="header-file" value="Descriptors.h"/>
+ <build type="c-source" value="BootloaderAPI.c"/>
+ <build type="header-file" value="BootloaderAPI.h"/>
+ <build type="asm-source" value="BootloaderAPITable.S"/>
+
+ <build type="module-config" subtype="path" value="Config"/>
+ <build type="header-file" value="Config/LUFAConfig.h"/>
+ <build type="header-file" value="Config/AppConfig.h"/>
+
+ <build type="distribute" subtype="user-file" value="doxyfile"/>
+ <build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>
+
+ <require idref="lufa.common"/>
+ <require idref="lufa.platform"/>
+ <require idref="lufa.drivers.usb"/>
+ <require idref="lufa.drivers.board"/>
+ <require idref="lufa.drivers.board.leds"/>
+ </module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml
index 9394b13530..c67b9419ed 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml
@@ -1,123 +1,123 @@
-<asf xmlversion="1.0">
- <project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">
- <require idref="lufa.bootloaders.hid"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="at90usb1287"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
- </project>
-
- <project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">
- <require idref="lufa.bootloaders.hid"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="at90usb647"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0xF000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
- </project>
-
- <project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">
- <require idref="lufa.bootloaders.hid"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="atmega32u4"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
- </project>
-
- <project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">
- <require idref="lufa.bootloaders.hid"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="atmega16u2"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x3800"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>
- </project>
-
- <project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">
- <require idref="lufa.bootloaders.hid"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="atmega8u2"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x1800"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>
- </project>
-
- <module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">
- <info type="description" value="summary">
- HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.
- </info>
-
- <info type="gui-flag" value="move-to-root"/>
-
- <info type="keyword" value="Technology">
- <keyword value="Bootloaders"/>
- <keyword value="USB Device"/>
- </info>
-
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="include-path" value="."/>
- <build type="c-source" value="BootloaderHID.c"/>
- <build type="header-file" value="BootloaderHID.h"/>
- <build type="c-source" value="Descriptors.c"/>
- <build type="header-file" value="Descriptors.h"/>
-
- <build type="module-config" subtype="path" value="Config"/>
- <build type="header-file" value="Config/LUFAConfig.h"/>
-
- <build type="distribute" subtype="user-file" value="doxyfile"/>
- <build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>
- <build type="distribute" subtype="directory" value="HostLoaderApp"/>
- <build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>
-
- <require idref="lufa.common"/>
- <require idref="lufa.platform"/>
- <require idref="lufa.drivers.usb"/>
- <require idref="lufa.drivers.board"/>
- <require idref="lufa.drivers.board.leds"/>
- </module>
-</asf>
+<asf xmlversion="1.0">
+ <project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">
+ <require idref="lufa.bootloaders.hid"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb1287"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+ </project>
+
+ <project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">
+ <require idref="lufa.bootloaders.hid"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb647"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+ </project>
+
+ <project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">
+ <require idref="lufa.bootloaders.hid"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega32u4"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+ </project>
+
+ <project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">
+ <require idref="lufa.bootloaders.hid"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega16u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x3800"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>
+ </project>
+
+ <project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">
+ <require idref="lufa.bootloaders.hid"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega8u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1800"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>
+ </project>
+
+ <module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">
+ <info type="description" value="summary">
+ HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.
+ </info>
+
+ <info type="gui-flag" value="move-to-root"/>
+
+ <info type="keyword" value="Technology">
+ <keyword value="Bootloaders"/>
+ <keyword value="USB Device"/>
+ </info>
+
+ <device-support-alias value="lufa_avr8"/>
+ <device-support-alias value="lufa_xmega"/>
+ <device-support-alias value="lufa_uc3"/>
+
+ <build type="include-path" value="."/>
+ <build type="c-source" value="BootloaderHID.c"/>
+ <build type="header-file" value="BootloaderHID.h"/>
+ <build type="c-source" value="Descriptors.c"/>
+ <build type="header-file" value="Descriptors.h"/>
+
+ <build type="module-config" subtype="path" value="Config"/>
+ <build type="header-file" value="Config/LUFAConfig.h"/>
+
+ <build type="distribute" subtype="user-file" value="doxyfile"/>
+ <build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>
+ <build type="distribute" subtype="directory" value="HostLoaderApp"/>
+ <build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>
+
+ <require idref="lufa.common"/>
+ <require idref="lufa.platform"/>
+ <require idref="lufa.drivers.usb"/>
+ <require idref="lufa.drivers.board"/>
+ <require idref="lufa.drivers.board.leds"/>
+ </module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S
index 6844d4b01c..91fc949666 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S
@@ -1,102 +1,102 @@
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2014.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaims all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#if AUX_BOOT_SECTION_SIZE > 0
-#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).
-
-; Trampoline to jump over the AUX bootloader section to the start of the bootloader,
-; on devices where an AUX bootloader section is used.
-.section .boot_aux_trampoline, "ax"
-.global Boot_AUX_Trampoline
-Boot_AUX_Trampoline:
- jmp BOOT_START_ADDR
-#endif
-
-; Trampolines to actual API implementations if the target address is outside the
-; range of a rjmp instruction (can happen with large bootloader sections)
-.section .apitable_trampolines, "ax"
-.global BootloaderAPI_Trampolines
-BootloaderAPI_Trampolines:
-
- BootloaderAPI_ErasePage_Trampoline:
- jmp BootloaderAPI_ErasePage
- BootloaderAPI_WritePage_Trampoline:
- jmp BootloaderAPI_WritePage
- BootloaderAPI_FillWord_Trampoline:
- jmp BootloaderAPI_FillWord
- BootloaderAPI_ReadSignature_Trampoline:
- jmp BootloaderAPI_ReadSignature
- BootloaderAPI_ReadFuse_Trampoline:
- jmp BootloaderAPI_ReadFuse
- BootloaderAPI_ReadLock_Trampoline:
- jmp BootloaderAPI_ReadLock
- BootloaderAPI_WriteLock_Trampoline:
- jmp BootloaderAPI_WriteLock
- BootloaderAPI_UNUSED1:
- ret
- BootloaderAPI_UNUSED2:
- ret
- BootloaderAPI_UNUSED3:
- ret
- BootloaderAPI_UNUSED4:
- ret
- BootloaderAPI_UNUSED5:
- ret
-
-
-
-; API function jump table
-.section .apitable_jumptable, "ax"
-.global BootloaderAPI_JumpTable
-BootloaderAPI_JumpTable:
-
- rjmp BootloaderAPI_ErasePage_Trampoline
- rjmp BootloaderAPI_WritePage_Trampoline
- rjmp BootloaderAPI_FillWord_Trampoline
- rjmp BootloaderAPI_ReadSignature_Trampoline
- rjmp BootloaderAPI_ReadFuse_Trampoline
- rjmp BootloaderAPI_ReadLock_Trampoline
- rjmp BootloaderAPI_WriteLock_Trampoline
- rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
- rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
- rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
- rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
- rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
-
-
-
-; Bootloader table signatures and information
-.section .apitable_signatures, "ax"
-.global BootloaderAPI_Signatures
-BootloaderAPI_Signatures:
-
- .long BOOT_START_ADDR ; Start address of the bootloader
- .word 0xDF30 ; Signature for the MS class bootloader, V1
- .word 0xDCFB ; Signature for a LUFA class bootloader
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2014.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaims all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+#if AUX_BOOT_SECTION_SIZE > 0
+#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).
+
+; Trampoline to jump over the AUX bootloader section to the start of the bootloader,
+; on devices where an AUX bootloader section is used.
+.section .boot_aux_trampoline, "ax"
+.global Boot_AUX_Trampoline
+Boot_AUX_Trampoline:
+ jmp BOOT_START_ADDR
+#endif
+
+; Trampolines to actual API implementations if the target address is outside the
+; range of a rjmp instruction (can happen with large bootloader sections)
+.section .apitable_trampolines, "ax"
+.global BootloaderAPI_Trampolines
+BootloaderAPI_Trampolines:
+
+ BootloaderAPI_ErasePage_Trampoline:
+ jmp BootloaderAPI_ErasePage
+ BootloaderAPI_WritePage_Trampoline:
+ jmp BootloaderAPI_WritePage
+ BootloaderAPI_FillWord_Trampoline:
+ jmp BootloaderAPI_FillWord
+ BootloaderAPI_ReadSignature_Trampoline:
+ jmp BootloaderAPI_ReadSignature
+ BootloaderAPI_ReadFuse_Trampoline:
+ jmp BootloaderAPI_ReadFuse
+ BootloaderAPI_ReadLock_Trampoline:
+ jmp BootloaderAPI_ReadLock
+ BootloaderAPI_WriteLock_Trampoline:
+ jmp BootloaderAPI_WriteLock
+ BootloaderAPI_UNUSED1:
+ ret
+ BootloaderAPI_UNUSED2:
+ ret
+ BootloaderAPI_UNUSED3:
+ ret
+ BootloaderAPI_UNUSED4:
+ ret
+ BootloaderAPI_UNUSED5:
+ ret
+
+
+
+; API function jump table
+.section .apitable_jumptable, "ax"
+.global BootloaderAPI_JumpTable
+BootloaderAPI_JumpTable:
+
+ rjmp BootloaderAPI_ErasePage_Trampoline
+ rjmp BootloaderAPI_WritePage_Trampoline
+ rjmp BootloaderAPI_FillWord_Trampoline
+ rjmp BootloaderAPI_ReadSignature_Trampoline
+ rjmp BootloaderAPI_ReadFuse_Trampoline
+ rjmp BootloaderAPI_ReadLock_Trampoline
+ rjmp BootloaderAPI_WriteLock_Trampoline
+ rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
+ rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
+ rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
+ rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
+ rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
+
+
+
+; Bootloader table signatures and information
+.section .apitable_signatures, "ax"
+.global BootloaderAPI_Signatures
+BootloaderAPI_Signatures:
+
+ .long BOOT_START_ADDR ; Start address of the bootloader
+ .word 0xDF30 ; Signature for the MS class bootloader, V1
+ .word 0xDCFB ; Signature for a LUFA class bootloader
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml
index f1d550d1eb..700ffa26ff 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml
@@ -1,156 +1,156 @@
-<asf xmlversion="1.0">
- <project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">
- <require idref="lufa.bootloaders.mass_storage"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="at90usb1287"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x1E000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>
-
- <build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">
- <require idref="lufa.bootloaders.mass_storage"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="at90usb647"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0xE000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>
-
- <build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">
- <require idref="lufa.bootloaders.mass_storage"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="atmega32u4"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
-
- <build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
- <build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>
- <build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>
- <build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">
- <require idref="lufa.bootloaders.mass_storage"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="atmega16u2"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x3000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
-
- <build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
- <build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>
- <build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>
- <build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">
- <info type="description" value="summary">
- Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.
- </info>
-
- <info type="gui-flag" value="move-to-root"/>
-
- <info type="keyword" value="Technology">
- <keyword value="Bootloaders"/>
- <keyword value="USB Device"/>
- </info>
-
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="include-path" value="."/>
- <build type="c-source" value="BootloaderMassStorage.c"/>
- <build type="header-file" value="BootloaderMassStorage.h"/>
- <build type="c-source" value="Descriptors.c"/>
- <build type="header-file" value="Descriptors.h"/>
- <build type="c-source" value="BootloaderAPI.c"/>
- <build type="header-file" value="BootloaderAPI.h"/>
- <build type="asm-source" value="BootloaderAPITable.S"/>
-
- <build type="module-config" subtype="path" value="Config"/>
- <build type="header-file" value="Config/LUFAConfig.h"/>
- <build type="header-file" value="Config/AppConfig.h"/>
-
- <build type="include-path" value="Lib"/>
- <build type="header-file" value="Lib/VirtualFAT.h"/>
- <build type="c-source" value="Lib/VirtualFAT.c"/>
- <build type="header-file" value="Lib/SCSI.h"/>
- <build type="c-source" value="Lib/SCSI.c"/>
-
- <build type="distribute" subtype="user-file" value="doxyfile"/>
- <build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>
-
- <require idref="lufa.common"/>
- <require idref="lufa.platform"/>
- <require idref="lufa.drivers.usb"/>
- <require idref="lufa.drivers.board"/>
- <require idref="lufa.drivers.board.leds"/>
- </module>
-</asf>
+<asf xmlversion="1.0">
+ <project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">
+ <require idref="lufa.bootloaders.mass_storage"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb1287"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1E000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>
+
+ <build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">
+ <require idref="lufa.bootloaders.mass_storage"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb647"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0xE000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>
+
+ <build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">
+ <require idref="lufa.bootloaders.mass_storage"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega32u4"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+ <build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>
+ <build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">
+ <require idref="lufa.bootloaders.mass_storage"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega16u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+ <build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>
+ <build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">
+ <info type="description" value="summary">
+ Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.
+ </info>
+
+ <info type="gui-flag" value="move-to-root"/>
+
+ <info type="keyword" value="Technology">
+ <keyword value="Bootloaders"/>
+ <keyword value="USB Device"/>
+ </info>
+
+ <device-support-alias value="lufa_avr8"/>
+ <device-support-alias value="lufa_xmega"/>
+ <device-support-alias value="lufa_uc3"/>
+
+ <build type="include-path" value="."/>
+ <build type="c-source" value="BootloaderMassStorage.c"/>
+ <build type="header-file" value="BootloaderMassStorage.h"/>
+ <build type="c-source" value="Descriptors.c"/>
+ <build type="header-file" value="Descriptors.h"/>
+ <build type="c-source" value="BootloaderAPI.c"/>
+ <build type="header-file" value="BootloaderAPI.h"/>
+ <build type="asm-source" value="BootloaderAPITable.S"/>
+
+ <build type="module-config" subtype="path" value="Config"/>
+ <build type="header-file" value="Config/LUFAConfig.h"/>
+ <build type="header-file" value="Config/AppConfig.h"/>
+
+ <build type="include-path" value="Lib"/>
+ <build type="header-file" value="Lib/VirtualFAT.h"/>
+ <build type="c-source" value="Lib/VirtualFAT.c"/>
+ <build type="header-file" value="Lib/SCSI.h"/>
+ <build type="c-source" value="Lib/SCSI.c"/>
+
+ <build type="distribute" subtype="user-file" value="doxyfile"/>
+ <build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>
+
+ <require idref="lufa.common"/>
+ <require idref="lufa.platform"/>
+ <require idref="lufa.drivers.usb"/>
+ <require idref="lufa.drivers.board"/>
+ <require idref="lufa.drivers.board.leds"/>
+ </module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile
index 91bb4038e8..a0edb2c4f5 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile
@@ -1,68 +1,68 @@
-#
-# LUFA Library
-# Copyright (C) Dean Camera, 2014.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-# --------------------------------------
-# LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU = at90usb1287
-ARCH = AVR8
-BOARD = USBKEY
-F_CPU = 8000000
-F_USB = $(F_CPU)
-OPTIMIZATION = s
-TARGET = BootloaderMassStorage
-SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH = ../../LUFA
-CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
-LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
-
-# Flash size and bootloader section sizes of the target, in KB. These must
-# match the target's total FLASH size and the bootloader size set in the
-# device's fuses.
-FLASH_SIZE_KB = 128
-BOOT_SECTION_SIZE_KB = 8
-
-# Bootloader address calculation formulas
-# Do not modify these macros, but rather modify the dependent values above.
-CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
-BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
-BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
-
-# Bootloader linker section flags for relocating the API table sections to
-# known FLASH addresses - these should not normally be user-edited.
-BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
-BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
-BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
-BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
-
-# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the
-# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum
-# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.
-ifeq ($(BOOT_SECTION_SIZE_KB),8)
- CC_FLAGS += -DAUX_BOOT_SECTION_SIZE=0
-else
- AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))
-
- CC_FLAGS += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'
- LD_FLAGS += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))
- LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)
-endif
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
+#
+# LUFA Library
+# Copyright (C) Dean Camera, 2014.
+#
+# dean [at] fourwalledcubicle [dot] com
+# www.lufa-lib.org
+#
+# --------------------------------------
+# LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU = at90usb1287
+ARCH = AVR8
+BOARD = USBKEY
+F_CPU = 8000000
+F_USB = $(F_CPU)
+OPTIMIZATION = s
+TARGET = BootloaderMassStorage
+SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH = ../../LUFA
+CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
+LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
+
+# Flash size and bootloader section sizes of the target, in KB. These must
+# match the target's total FLASH size and the bootloader size set in the
+# device's fuses.
+FLASH_SIZE_KB = 128
+BOOT_SECTION_SIZE_KB = 8
+
+# Bootloader address calculation formulas
+# Do not modify these macros, but rather modify the dependent values above.
+CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
+BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
+BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
+
+# Bootloader linker section flags for relocating the API table sections to
+# known FLASH addresses - these should not normally be user-edited.
+BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
+BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
+BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
+BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
+
+# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the
+# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum
+# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.
+ifeq ($(BOOT_SECTION_SIZE_KB),8)
+ CC_FLAGS += -DAUX_BOOT_SECTION_SIZE=0
+else
+ AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))
+
+ CC_FLAGS += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'
+ LD_FLAGS += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))
+ LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)
+endif
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S
index ec499b74e5..88c51da825 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S
@@ -1,91 +1,91 @@
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2014.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaims all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-; Trampolines to actual API implementations if the target address is outside the
-; range of a rjmp instruction (can happen with large bootloader sections)
-.section .apitable_trampolines, "ax"
-.global BootloaderAPI_Trampolines
-BootloaderAPI_Trampolines:
-
- BootloaderAPI_ErasePage_Trampoline:
- jmp BootloaderAPI_ErasePage
- BootloaderAPI_WritePage_Trampoline:
- jmp BootloaderAPI_WritePage
- BootloaderAPI_FillWord_Trampoline:
- jmp BootloaderAPI_FillWord
- BootloaderAPI_ReadSignature_Trampoline:
- jmp BootloaderAPI_ReadSignature
- BootloaderAPI_ReadFuse_Trampoline:
- jmp BootloaderAPI_ReadFuse
- BootloaderAPI_ReadLock_Trampoline:
- jmp BootloaderAPI_ReadLock
- BootloaderAPI_WriteLock_Trampoline:
- jmp BootloaderAPI_WriteLock
- BootloaderAPI_UNUSED1:
- ret
- BootloaderAPI_UNUSED2:
- ret
- BootloaderAPI_UNUSED3:
- ret
- BootloaderAPI_UNUSED4:
- ret
- BootloaderAPI_UNUSED5:
- ret
-
-
-
-; API function jump table
-.section .apitable_jumptable, "ax"
-.global BootloaderAPI_JumpTable
-BootloaderAPI_JumpTable:
-
- rjmp BootloaderAPI_ErasePage_Trampoline
- rjmp BootloaderAPI_WritePage_Trampoline
- rjmp BootloaderAPI_FillWord_Trampoline
- rjmp BootloaderAPI_ReadSignature_Trampoline
- rjmp BootloaderAPI_ReadFuse_Trampoline
- rjmp BootloaderAPI_ReadLock_Trampoline
- rjmp BootloaderAPI_WriteLock_Trampoline
- rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
- rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
- rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
- rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
- rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
-
-
-
-; Bootloader table signatures and information
-.section .apitable_signatures, "ax"
-.global BootloaderAPI_Signatures
-BootloaderAPI_Signatures:
-
- .long BOOT_START_ADDR ; Start address of the bootloader
- .word 0xDF20 ; Signature for the Printer class bootloader
- .word 0xDCFB ; Signature for a LUFA class bootloader
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2014.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaims all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+; Trampolines to actual API implementations if the target address is outside the
+; range of a rjmp instruction (can happen with large bootloader sections)
+.section .apitable_trampolines, "ax"
+.global BootloaderAPI_Trampolines
+BootloaderAPI_Trampolines:
+
+ BootloaderAPI_ErasePage_Trampoline:
+ jmp BootloaderAPI_ErasePage
+ BootloaderAPI_WritePage_Trampoline:
+ jmp BootloaderAPI_WritePage
+ BootloaderAPI_FillWord_Trampoline:
+ jmp BootloaderAPI_FillWord
+ BootloaderAPI_ReadSignature_Trampoline:
+ jmp BootloaderAPI_ReadSignature
+ BootloaderAPI_ReadFuse_Trampoline:
+ jmp BootloaderAPI_ReadFuse
+ BootloaderAPI_ReadLock_Trampoline:
+ jmp BootloaderAPI_ReadLock
+ BootloaderAPI_WriteLock_Trampoline:
+ jmp BootloaderAPI_WriteLock
+ BootloaderAPI_UNUSED1:
+ ret
+ BootloaderAPI_UNUSED2:
+ ret
+ BootloaderAPI_UNUSED3:
+ ret
+ BootloaderAPI_UNUSED4:
+ ret
+ BootloaderAPI_UNUSED5:
+ ret
+
+
+
+; API function jump table
+.section .apitable_jumptable, "ax"
+.global BootloaderAPI_JumpTable
+BootloaderAPI_JumpTable:
+
+ rjmp BootloaderAPI_ErasePage_Trampoline
+ rjmp BootloaderAPI_WritePage_Trampoline
+ rjmp BootloaderAPI_FillWord_Trampoline
+ rjmp BootloaderAPI_ReadSignature_Trampoline
+ rjmp BootloaderAPI_ReadFuse_Trampoline
+ rjmp BootloaderAPI_ReadLock_Trampoline
+ rjmp BootloaderAPI_WriteLock_Trampoline
+ rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
+ rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
+ rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
+ rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
+ rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
+
+
+
+; Bootloader table signatures and information
+.section .apitable_signatures, "ax"
+.global BootloaderAPI_Signatures
+BootloaderAPI_Signatures:
+
+ .long BOOT_START_ADDR ; Start address of the bootloader
+ .word 0xDF20 ; Signature for the Printer class bootloader
+ .word 0xDCFB ; Signature for a LUFA class bootloader
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml
index 86a56911ed..b5c0c6b3a5 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml
@@ -1,159 +1,159 @@
-<asf xmlversion="1.0">
- <project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">
- <require idref="lufa.bootloaders.printer"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="at90usb1287"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">
- <require idref="lufa.bootloaders.printer"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="at90usb647"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0xF000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">
- <require idref="lufa.bootloaders.printer"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="atmega32u4"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">
- <require idref="lufa.bootloaders.printer"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="atmega16u2"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x3000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">
- <require idref="lufa.bootloaders.printer"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8"/>
-
- <device-support value="atmega8u2"/>
- <config name="lufa.drivers.board.name" value="none"/>
-
- <config name="config.compiler.optimization.level" value="size"/>
-
- <build type="define" name="F_CPU" value="16000000UL"/>
- <build type="define" name="F_USB" value="16000000UL"/>
-
- <build type="define" name="BOOT_START_ADDR" value="0x1000"/>
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
-
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
- </project>
-
- <module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">
- <info type="description" value="summary">
- Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.
- </info>
-
- <info type="gui-flag" value="move-to-root"/>
-
- <info type="keyword" value="Technology">
- <keyword value="Bootloaders"/>
- <keyword value="USB Device"/>
- </info>
-
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="include-path" value="."/>
- <build type="c-source" value="BootloaderPrinter.c"/>
- <build type="header-file" value="BootloaderPrinter.h"/>
- <build type="c-source" value="Descriptors.c"/>
- <build type="header-file" value="Descriptors.h"/>
- <build type="c-source" value="BootloaderAPI.c"/>
- <build type="header-file" value="BootloaderAPI.h"/>
- <build type="asm-source" value="BootloaderAPITable.S"/>
-
- <build type="module-config" subtype="path" value="Config"/>
- <build type="header-file" value="Config/LUFAConfig.h"/>
-
- <build type="distribute" subtype="user-file" value="doxyfile"/>
- <build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>
-
- <require idref="lufa.common"/>
- <require idref="lufa.platform"/>
- <require idref="lufa.drivers.usb"/>
- <require idref="lufa.drivers.board"/>
- <require idref="lufa.drivers.board.leds"/>
- </module>
-</asf>
+<asf xmlversion="1.0">
+ <project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">
+ <require idref="lufa.bootloaders.printer"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb1287"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">
+ <require idref="lufa.bootloaders.printer"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb647"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">
+ <require idref="lufa.bootloaders.printer"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega32u4"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">
+ <require idref="lufa.bootloaders.printer"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega16u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">
+ <require idref="lufa.bootloaders.printer"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega8u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">
+ <info type="description" value="summary">
+ Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.
+ </info>
+
+ <info type="gui-flag" value="move-to-root"/>
+
+ <info type="keyword" value="Technology">
+ <keyword value="Bootloaders"/>
+ <keyword value="USB Device"/>
+ </info>
+
+ <device-support-alias value="lufa_avr8"/>
+ <device-support-alias value="lufa_xmega"/>
+ <device-support-alias value="lufa_uc3"/>
+
+ <build type="include-path" value="."/>
+ <build type="c-source" value="BootloaderPrinter.c"/>
+ <build type="header-file" value="BootloaderPrinter.h"/>
+ <build type="c-source" value="Descriptors.c"/>
+ <build type="header-file" value="Descriptors.h"/>
+ <build type="c-source" value="BootloaderAPI.c"/>
+ <build type="header-file" value="BootloaderAPI.h"/>
+ <build type="asm-source" value="BootloaderAPITable.S"/>
+
+ <build type="module-config" subtype="path" value="Config"/>
+ <build type="header-file" value="Config/LUFAConfig.h"/>
+
+ <build type="distribute" subtype="user-file" value="doxyfile"/>
+ <build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>
+
+ <require idref="lufa.common"/>
+ <require idref="lufa.platform"/>
+ <require idref="lufa.drivers.usb"/>
+ <require idref="lufa.drivers.board"/>
+ <require idref="lufa.drivers.board.leds"/>
+ </module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile
index 0716c3bbe8..0db035de3b 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile
@@ -1,55 +1,55 @@
-#
-# LUFA Library
-# Copyright (C) Dean Camera, 2014.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-# --------------------------------------
-# LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU = at90usb1287
-ARCH = AVR8
-BOARD = USBKEY
-F_CPU = 8000000
-F_USB = $(F_CPU)
-OPTIMIZATION = s
-TARGET = BootloaderPrinter
-SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH = ../../LUFA
-CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
-LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
-
-# Flash size and bootloader section sizes of the target, in KB. These must
-# match the target's total FLASH size and the bootloader size set in the
-# device's fuses.
-FLASH_SIZE_KB = 128
-BOOT_SECTION_SIZE_KB = 8
-
-# Bootloader address calculation formulas
-# Do not modify these macros, but rather modify the dependent values above.
-CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
-BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
-BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
-
-# Bootloader linker section flags for relocating the API table sections to
-# known FLASH addresses - these should not normally be user-edited.
-BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
-BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
-BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
-BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
+#
+# LUFA Library
+# Copyright (C) Dean Camera, 2014.
+#
+# dean [at] fourwalledcubicle [dot] com
+# www.lufa-lib.org
+#
+# --------------------------------------
+# LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU = at90usb1287
+ARCH = AVR8
+BOARD = USBKEY
+F_CPU = 8000000
+F_USB = $(F_CPU)
+OPTIMIZATION = s
+TARGET = BootloaderPrinter
+SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH = ../../LUFA
+CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
+LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
+
+# Flash size and bootloader section sizes of the target, in KB. These must
+# match the target's total FLASH size and the bootloader size set in the
+# device's fuses.
+FLASH_SIZE_KB = 128
+BOOT_SECTION_SIZE_KB = 8
+
+# Bootloader address calculation formulas
+# Do not modify these macros, but rather modify the dependent values above.
+CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
+BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
+BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
+
+# Bootloader linker section flags for relocating the API table sections to
+# known FLASH addresses - these should not normally be user-edited.
+BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
+BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
+BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
+BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile b/tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile
index 9fd188c936..e839ba6b1d 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile
@@ -1,42 +1,42 @@
-#
-# LUFA Library
-# Copyright (C) Dean Camera, 2014.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-# --------------------------------------
-# LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU = at90usb1287
-ARCH = AVR8
-F_CPU = 1000000
-F_USB = $(F_CPU)
-OPTIMIZATION = s
-TARGET = HID_EEPROM_Loader
-SRC = $(TARGET).c
-LUFA_PATH = ../../../LUFA
-CC_FLAGS =
-LD_FLAGS =
-OBJECT_FILES = InputEEData.o
-
-# Default target
-all:
-
-# Determine the AVR sub-architecture of the build main application object file
-FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1)
-
-# Create a linkable object file with the input binary EEPROM data stored in the FLASH section
-InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST)
- @echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\"
- avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
+#
+# LUFA Library
+# Copyright (C) Dean Camera, 2014.
+#
+# dean [at] fourwalledcubicle [dot] com
+# www.lufa-lib.org
+#
+# --------------------------------------
+# LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU = at90usb1287
+ARCH = AVR8
+F_CPU = 1000000
+F_USB = $(F_CPU)
+OPTIMIZATION = s
+TARGET = HID_EEPROM_Loader
+SRC = $(TARGET).c
+LUFA_PATH = ../../../LUFA
+CC_FLAGS =
+LD_FLAGS =
+OBJECT_FILES = InputEEData.o
+
+# Default target
+all:
+
+# Determine the AVR sub-architecture of the build main application object file
+FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1)
+
+# Create a linkable object file with the input binary EEPROM data stored in the FLASH section
+InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST)
+ @echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\"
+ avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml
index fd65db283f..e952714e16 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml
@@ -1,55 +1,55 @@
-<asf xmlversion="1.0">
- <project caption="USB Device Template" id="lufa.templates.device.project.avr8">
- <require idref="lufa.templates.device"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8_template"/>
-
- <device-support value="at90usb1287"/>
- <config name="lufa.drivers.board.name" value="usbkey"/>
-
- <build type="define" name="F_CPU" value="8000000UL"/>
- <build type="define" name="F_USB" value="8000000UL"/>
- </project>
-
- <project caption="USB Device Template" id="lufa.templates.device.project.xmega">
- <require idref="lufa.templates.device"/>
- <require idref="lufa.boards.dummy.xmega"/>
- <generator value="as5_8_template"/>
-
- <device-support value="atxmega256a3bu"/>
- <config name="lufa.drivers.board.name" value="a3bu_xplained"/>
-
- <build type="define" name="F_CPU" value="32000000UL"/>
- <build type="define" name="F_USB" value="48000000UL"/>
- </project>
-
- <module type="application" id="lufa.templates.device" caption="USB Device Template">
- <info type="description" value="summary">
- Template for a LUFA USB device mode application.
- </info>
-
- <info type="gui-flag" value="move-to-root"/>
-
- <info type="keyword" value="Technology">
- <keyword value="USB Device"/>
- <keyword value="Template Projects"/>
- </info>
-
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="c-source" value="DeviceApplication.c"/>
- <build type="c-source" value="Descriptors.c"/>
- <build type="header-file" value="DeviceApplication.h"/>
- <build type="header-file" value="Descriptors.h"/>
-
- <build type="module-config" subtype="path" value=".."/>
- <build type="header-file" value="../LUFAConfig.h"/>
-
- <require idref="lufa.common"/>
- <require idref="lufa.platform"/>
- <require idref="lufa.drivers.usb"/>
- <require idref="lufa.drivers.board"/>
- </module>
-</asf>
+<asf xmlversion="1.0">
+ <project caption="USB Device Template" id="lufa.templates.device.project.avr8">
+ <require idref="lufa.templates.device"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8_template"/>
+
+ <device-support value="at90usb1287"/>
+ <config name="lufa.drivers.board.name" value="usbkey"/>
+
+ <build type="define" name="F_CPU" value="8000000UL"/>
+ <build type="define" name="F_USB" value="8000000UL"/>
+ </project>
+
+ <project caption="USB Device Template" id="lufa.templates.device.project.xmega">
+ <require idref="lufa.templates.device"/>
+ <require idref="lufa.boards.dummy.xmega"/>
+ <generator value="as5_8_template"/>
+
+ <device-support value="atxmega256a3bu"/>
+ <config name="lufa.drivers.board.name" value="a3bu_xplained"/>
+
+ <build type="define" name="F_CPU" value="32000000UL"/>
+ <build type="define" name="F_USB" value="48000000UL"/>
+ </project>
+
+ <module type="application" id="lufa.templates.device" caption="USB Device Template">
+ <info type="description" value="summary">
+ Template for a LUFA USB device mode application.
+ </info>
+
+ <info type="gui-flag" value="move-to-root"/>
+
+ <info type="keyword" value="Technology">
+ <keyword value="USB Device"/>
+ <keyword value="Template Projects"/>
+ </info>
+
+ <device-support-alias value="lufa_avr8"/>
+ <device-support-alias value="lufa_xmega"/>
+ <device-support-alias value="lufa_uc3"/>
+
+ <build type="c-source" value="DeviceApplication.c"/>
+ <build type="c-source" value="Descriptors.c"/>
+ <build type="header-file" value="DeviceApplication.h"/>
+ <build type="header-file" value="Descriptors.h"/>
+
+ <build type="module-config" subtype="path" value=".."/>
+ <build type="header-file" value="../LUFAConfig.h"/>
+
+ <require idref="lufa.common"/>
+ <require idref="lufa.platform"/>
+ <require idref="lufa.drivers.usb"/>
+ <require idref="lufa.drivers.board"/>
+ </module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml
index c1996ec711..c3860c056d 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml
@@ -1,41 +1,41 @@
-<asf xmlversion="1.0">
- <project caption="USB Host Template" id="lufa.templates.host.project">
- <require idref="lufa.templates.host"/>
- <require idref="lufa.boards.dummy.avr8"/>
- <generator value="as5_8_template"/>
-
- <device-support value="at90usb1287"/>
- <config name="lufa.drivers.board.name" value="usbkey"/>
-
- <build type="define" name="F_CPU" value="8000000UL"/>
- <build type="define" name="F_USB" value="8000000UL"/>
- </project>
-
- <module type="application" id="lufa.templates.host" caption="USB Host Template">
- <info type="description" value="summary">
- Template for a LUFA USB host mode application.
- </info>
-
- <info type="gui-flag" value="move-to-root"/>
-
- <info type="keyword" value="Technology">
- <keyword value="USB Host"/>
- <keyword value="Template Projects"/>
- </info>
-
- <device-support-alias value="lufa_avr8"/>
- <device-support-alias value="lufa_xmega"/>
- <device-support-alias value="lufa_uc3"/>
-
- <build type="c-source" value="HostApplication.c"/>
- <build type="header-file" value="HostApplication.h"/>
-
- <build type="module-config" subtype="path" value=".."/>
- <build type="header-file" value="../LUFAConfig.h"/>
-
- <require idref="lufa.common"/>
- <require idref="lufa.platform"/>
- <require idref="lufa.drivers.usb"/>
- <require idref="lufa.drivers.board"/>
- </module>
-</asf>
+<asf xmlversion="1.0">
+ <project caption="USB Host Template" id="lufa.templates.host.project">
+ <require idref="lufa.templates.host"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8_template"/>
+
+ <device-support value="at90usb1287"/>
+ <config name="lufa.drivers.board.name" value="usbkey"/>
+
+ <build type="define" name="F_CPU" value="8000000UL"/>
+ <build type="define" name="F_USB" value="8000000UL"/>
+ </project>
+
+ <module type="application" id="lufa.templates.host" caption="USB Host Template">
+ <info type="description" value="summary">
+ Template for a LUFA USB host mode application.
+ </info>
+
+ <info type="gui-flag" value="move-to-root"/>
+
+ <info type="keyword" value="Technology">
+ <keyword value="USB Host"/>
+ <keyword value="Template Projects"/>
+ </info>
+
+ <device-support-alias value="lufa_avr8"/>
+ <device-support-alias value="lufa_xmega"/>
+ <device-support-alias value="lufa_uc3"/>
+
+ <build type="c-source" value="HostApplication.c"/>
+ <build type="header-file" value="HostApplication.h"/>
+
+ <build type="module-config" subtype="path" value=".."/>
+ <build type="header-file" value="../LUFAConfig.h"/>
+
+ <require idref="lufa.common"/>
+ <require idref="lufa.platform"/>
+ <require idref="lufa.drivers.usb"/>
+ <require idref="lufa.drivers.board"/>
+ </module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt b/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt
index 7ddfa1be3f..0ae1dd678f 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt
@@ -1,975 +1,975 @@
-/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \page Page_BuildSystem The LUFA Build System
- *
- * \section Sec_BuildSystem_Overview Overview of the LUFA Build System
- * The LUFA build system is an attempt at making a set of re-usable, modular build make files which
- * can be referenced in a LUFA powered project, to minimize the amount of code required in an
- * application makefile. The system is written in GNU Make, and each module is independent of
- * one-another.
- *
- * For details on the prerequisites needed for Linux and Windows machines to be able to use the LUFA
- * build system, see \ref Sec_CompilingApps_Prerequisites.
- *
- * To use a LUFA build system module, simply add an include to your project makefile. All user projects
- * should at a minimum include \ref Page_BuildModule_CORE for base functionality:
- * \code
- * include $(LUFA_PATH)/Build/lufa_core.mk
- * \endcode
- *
- * Once included in your project makefile, the associated build module targets will be added to your
- * project's build makefile targets automatically. To call a build target, run <tt>make {TARGET_NAME}</tt>
- * from the command line, substituting in the appropriate target name.
- *
- * \see \ref Sec_ConfiguringApps_AppMakefileParams for a copy of the sample LUFA project makefile.
- *
- * Each build module may have one or more mandatory parameters (GNU Make variables) which <i>must</i>
- * be supplied in the project makefile for the module to work, and one or more optional parameters which
- * may be defined and which will assume a sensible default if not.
- *
- * \section SSec_BuildSystem_Modules Available Modules
- *
- * The following modules are included in this LUFA release:
- *
- * \li \subpage Page_BuildModule_ATPROGRAM - Device Programming
- * \li \subpage Page_BuildModule_AVRDUDE - Device Programming
- * \li \subpage Page_BuildModule_BUILD - Compiling/Assembling/Linking
- * \li \subpage Page_BuildModule_CORE - Core Build System Functions
- * \li \subpage Page_BuildModule_CPPCHECK - Static Code Analysis
- * \li \subpage Page_BuildModule_DFU - Device Programming
- * \li \subpage Page_BuildModule_DOXYGEN - Automated Source Code Documentation
- * \li \subpage Page_BuildModule_HID - Device Programming
- * \li \subpage Page_BuildModule_SOURCES - LUFA Module Source Code Variables
- *
- * If you have problems building using the LUFA build system, see \subpage Page_BuildTroubleshooting for resolution steps.
- */
-
- /** \page Page_BuildModule_BUILD The BUILD build module
- *
- * The BUILD LUFA build system module, providing targets for the compilation,
- * assembling and linking of an application from source code into binary files
- * suitable for programming into a target device, using the GCC compiler.
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_build.mk
- * \endcode
- *
- * \section SSec_BuildModule_BUILD_Requirements Requirements
- * This module requires the the architecture appropriate binaries of the GCC compiler are available in your
- * system's <b>PATH</b> variable. The GCC compiler and associated toolchain is distributed in Atmel AVR Studio
- * 5.x and Atmel Studio 6.x installation directories, as well as in many third party distribution packages.
- *
- * \section SSec_BuildModule_BUILD_Targets Targets
- *
- * <table>
- * <tr>
- * <td><tt>size</tt></td>
- * <td>Display size of the compiled application FLASH and SRAM segments.</td>
- * </tr>
- * <tr>
- * <td><tt>symbol-sizes</tt></td>
- * <td>Display a size-sorted list of symbols from the compiled application, in decimal bytes.</td>
- * </tr>
- * <tr>
- * <td><tt>lib</tt></td>
- * <td>Build and archive all source files into a library A binary file.</td>
- * </tr>
- * <tr>
- * <td><tt>all</tt></td>
- * <td>Build and link the application into ELF debug and HEX binary files.</td>
- * </tr>
- * <tr>
- * <td><tt>elf</tt></td>
- * <td>Build and link the application into an ELF debug file.</td>
- * </tr>
- * <tr>
- * <td><tt>bin</tt></td>
- * <td>Build and link the application and produce a BIN binary file.</td>
- * </tr>
- * <tr>
- * <td><tt>hex</tt></td>
- * <td>Build and link the application and produce HEX and EEP binary files.</td>
- * </tr>
- * <tr>
- * <td><tt>lss</tt></td>
- * <td>Build and link the application and produce a LSS source code/assembly code mixed listing file.</td>
- * </tr>
- * <tr>
- * <td><tt>clean</tt></td>
- * <td>Remove all intermediary files and binary output files.</td>
- * </tr>
- * <tr>
- * <td><tt>mostlyclean</tt></td>
- * <td>Remove all intermediary files but preserve any binary output files.</td>
- * </tr>
- * <tr>
- * <td><tt><i>&lt;filename&gt;</i>.s</tt></td>
- * <td>Create an assembly listing of a given input C/C++ source file.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_BUILD_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><tt>TARGET</tt></td>
- * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>ARCH</tt></td>
- * <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
- * </tr>
- * <tr>
- * <td><tt>MCU</tt></td>
- * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>SRC</tt></td>
- * <td>List of relative or absolute paths to the application C (.c), C++ (.cpp) and Assembly (.S) source files.</td>
- * </tr>
- * <tr>
- * <td><tt>F_USB</tt></td>
- * <td>Speed in Hz of the input clock frequency to the target's USB controller.</td>
- * </tr>
- * <tr>
- * <td><tt>LUFA_PATH</tt></td>
- * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_BUILD_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><tt>BOARD</tt></td>
- * <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td>
- * </tr>
- * <tr>
- * <td><tt>OPTIMIZATION</tt></td>
- * <td>Optimization level to use when compiling source files (see GCC manual).</td>
- * </tr>
- * <tr>
- * <td><tt>C_STANDARD</tt></td>
- * <td>Version of the C standard to apply when compiling C++ source files (see GCC manual).</td>
- * </tr>
- * <tr>
- * <td><tt>CPP_STANDARD</tt></td>
- * <td>Version of the C++ standard to apply when compiling C++ source files (see GCC manual).</td>
- * </tr>
- * <tr>
- * <td><tt>DEBUG_FORMAT</tt></td>
- * <td>Format of the debug information to embed in the generated object files (see GCC manual).</td>
- * </tr>
- * <tr>
- * <td><tt>DEBUG_LEVEL</tt></td>
- * <td>Level of the debugging information to embed in the generated object files (see GCC manual).</td>
- * </tr>
- * <tr>
- * <td><tt>F_CPU</tt></td>
- * <td>Speed of the processor CPU clock, in Hz.</td>
- * </tr>
- * <tr>
- * <td><tt>C_FLAGS</tt></td>
- * <td>Flags to pass to the C compiler only, after the automatically generated flags.</td>
- * </tr>
- * <tr>
- * <td><tt>CPP_FLAGS</tt></td>
- * <td>Flags to pass to the C++ compiler only, after the automatically generated flags.</td>
- * </tr>
- * <tr>
- * <td><tt>ASM_FLAGS</tt></td>
- * <td>Flags to pass to the assembler only, after the automatically generated flags.</td>
- * </tr>
- * <tr>
- * <td><tt>CC_FLAGS</tt></td>
- * <td>Common flags to pass to the C/C++ compiler and assembler, after the automatically generated flags.</td>
- * </tr>
- * <tr>
- * <td><tt>COMPILER_PATH</tt></td>
- * <td>Directory where the C/C++ toolchain is located, if not available in the system <tt>PATH</tt>.</td>
- * </tr>
- * <tr>
- * <td><tt>LD_FLAGS</tt></td>
- * <td>Flags to pass to the linker, after the automatically generated flags.</td>
- * </tr>
- * <tr>
- * <td><tt>LINKER_RELAXATIONS</tt></td>
- * <td>Enables or disables linker relaxations when linking the application binary. This can reduce the total size
- * of the application by replacing full \c CALL instructions with smaller \c RCALL instructions where possible.
- * \note On some unpatched versions of binutils, this can cause link failures in some circumstances. If you
- * receive a link error <tt>relocation truncated to fit: R_AVR_13_PCREL</tt>, disable this setting.</td>
- * </tr>
- * <tr>
- * <td><tt>OBJDIR</tt></td>
- * <td>Directory to place the generated object and dependency files. If set to "." the same folder as the source file will be used.
- * \note When this option is enabled, all source filenames <b>must</b> be unique.</td>
- * </tr>
- * <tr>
- * <td><tt>OBJECT_FILES</tt></td>
- * <td>List of additional object files that should be linked into the resulting binary.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_BUILD_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_BUILD_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
-/** \page Page_BuildModule_CORE The CORE build module
- *
- * The core LUFA build system module, providing common build system help and information targets.
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_core.mk
- * \endcode
- *
- * \section SSec_BuildModule_CORE_Requirements Requirements
- * This module has no requirements outside a standard *nix shell like environment; the <tt>sh</tt>
- * shell, GNU <tt>make</tt> and *nix CoreUtils (<tt>echo</tt>, <tt>printf</tt>, etc.).
- *
- * \section SSec_BuildModule_CORE_Targets Targets
- *
- * <table>
- * <tr>
- * <td><tt>help</tt></td>
- * <td>Display build system help and configuration information.</td>
- * </tr>
- * <tr>
- * <td><tt>list_targets</tt></td>
- * <td>List all available build targets from the build system.</td>
- * </tr>
- * <tr>
- * <td><tt>list_modules</tt></td>
- * <td>List all available build modules from the build system.</td>
- * </tr>
- * <tr>
- * <td><tt>list_mandatory</tt></td>
- * <td>List all mandatory parameters required by the included modules.</td>
- * </tr>
- * <tr>
- * <td><tt>list_optional</tt></td>
- * <td>List all optional parameters required by the included modules.</td>
- * </tr>
- * <tr>
- * <td><tt>list_provided</tt></td>
- * <td>List all variables provided by the included modules.</td>
- * </tr>
- * <tr>
- * <td><tt>list_macros</tt></td>
- * <td>List all macros provided by the included modules.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_CORE_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_CORE_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_CORE_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_CORE_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
-/** \page Page_BuildModule_ATPROGRAM The ATPROGRAM build module
- *
- * The ATPROGRAM programming utility LUFA build system module, providing targets to reprogram an
- * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_atprogram.mk
- * \endcode
- *
- * \section SSec_BuildModule_ATPROGRAM_Requirements Requirements
- * This module requires the <tt>atprogram.exe</tt> utility to be available in your system's <b>PATH</b>
- * variable. The <tt>atprogram.exe</tt> utility is distributed in Atmel AVR Studio 5.x and Atmel Studio 6.x
- * inside the application install folder's "\atbackend" subdirectory.
- *
- * \section SSec_BuildModule_ATPROGRAM_Targets Targets
- *
- * <table>
- * <tr>
- * <td><tt>atprogram</tt></td>
- * <td>Program the device FLASH memory with the application's executable data.</td>
- * </tr>
- * <tr>
- * <td><tt>atprogram-ee</tt></td>
- * <td>Program the device EEPROM memory with the application's EEPROM data.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_ATPROGRAM_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><tt>MCU</tt></td>
- * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>TARGET</tt></td>
- * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_ATPROGRAM_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><tt>ATPROGRAM_PROGRAMMER</tt></td>
- * <td>Name of the Atmel programmer or debugger tool to communicate with (e.g. <tt>jtagice3</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>ATPROGRAM_INTERFACE</tt></td>
- * <td>Name of the programming interface to use when programming the target (e.g. <tt>spi</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>ATPROGRAM_PORT</tt></td>
- * <td>Name of the communication port to use when when programming with a serially connected tool (e.g. <tt>COM2</tt>).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_ATPROGRAM_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_ATPROGRAM_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
-/** \page Page_BuildModule_AVRDUDE The AVRDUDE build module
- *
- * The AVRDUDE programming utility LUFA build system module, providing targets to reprogram an
- * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_avrdude.mk
- * \endcode
- *
- * \section SSec_BuildModule_AVRDUDE_Requirements Requirements
- * This module requires the <tt>avrdude</tt> utility to be available in your system's <b>PATH</b>
- * variable. The <tt>avrdude</tt> utility is distributed in the old WinAVR project releases for
- * Windows (<a>http://winavr.sourceforge.net</a>) or can be installed on *nix systems via the project's
- * source code (<a>https://savannah.nongnu.org/projects/avrdude</a>) or through the package manager.
- *
- * \section SSec_BuildModule_AVRDUDE_Targets Targets
- *
- * <table>
- * <tr>
- * <td><tt>avrdude</tt></td>
- * <td>Program the device FLASH memory with the application's executable data.</td>
- * </tr>
- * <tr>
- * <td><tt>avrdude-ee</tt></td>
- * <td>Program the device EEPROM memory with the application's EEPROM data.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_AVRDUDE_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><tt>MCU</tt></td>
- * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>TARGET</tt></td>
- * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_AVRDUDE_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><tt>AVRDUDE_PROGRAMMER</tt></td>
- * <td>Name of the programmer or debugger tool to communicate with (e.g. <tt>jtagicemkii</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>AVRDUDE_PORT</tt></td>
- * <td>Name of the communication port to use when when programming with the connected tool (e.g. <tt>COM2</tt>, <tt>/dev/ttyUSB0</tt> or <tt>usb</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>AVRDUDE_FLAGS</tt></td>
- * <td>Additional flags to pass to avrdude when programming, applied after the automatically generated flags.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_AVRDUDE_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_AVRDUDE_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
- /** \page Page_BuildModule_CPPCHECK The CPPCHECK build module
- *
- * The CPPCHECK programming utility LUFA build system module, providing targets to statically
- * analyze C and C++ source code for errors and performance/style issues.
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_cppcheck.mk
- * \endcode
- *
- * \section SSec_BuildModule_CPPCHECK_Requirements Requirements
- * This module requires the <tt>cppcheck</tt> utility to be available in your system's <b>PATH</b>
- * variable. The <tt>cppcheck</tt> utility is distributed through the project's home page
- * (<a>http://cppcheck.sourceforge.net</a>) for Windows, and can be installed on *nix systems via
- * the project's source code or through the package manager.
- *
- * \section SSec_BuildModule_CPPCHECK_Targets Targets
- *
- * <table>
- * <tr>
- * <td><tt>cppcheck</tt></td>
- * <td>Statically analyze the project source code for issues.</td>
- * </tr>
- * <tr>
- * <td><tt>cppcheck-config</tt></td>
- * <td>Check the <tt>cppcheck</tt> configuration - scan source code and warn about missing header files and other issues.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_CPPCHECK_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><tt>SRC</tt></td>
- * <td>List of source files to statically analyze.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_CPPCHECK_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><tt>CPPCHECK_INCLUDES</tt></td>
- * <td>Path of extra directories to check when attemting to resolve C/C++ header file includes.</td>
- * </tr>
- * <tr>
- * <td><tt>CPPCHECK_EXCLUDES</tt></td>
- * <td>Paths or path fragments to exclude when analyzing.</td>
- * </tr>
- * <tr>
- * <td><tt>CPPCHECK_MSG_TEMPLATE</tt></td>
- * <td>Output message template to use when printing errors, warnings and information (see <tt>cppcheck</tt> documentation).</td>
- * </tr>
- * <tr>
- * <td><tt>CPPCHECK_ENABLE</tt></td>
- * <td>Analysis rule categories to enable (see <tt>cppcheck</tt> documentation).</td>
- * </tr>
- * <tr>
- * <td><tt>CPPCHECK_SUPPRESS</tt></td>
- * <td>Specific analysis rules to suppress (see <tt>cppcheck</tt> documentation).</td>
- * </tr>
- * <tr>
- * <td><tt>CPPCHECK_FAIL_ON_WARNING</tt></td>
- * <td>Set to <b>Y</b> to fail the analysis job with an error exit code if warnings are found, <b>N</b> to continue without failing.</td>
- * </tr>
- * <tr>
- * <td><tt>CPPCHECK_QUIET</tt></td>
- * <td>Set to <b>Y</b> to suppress all output except warnings and errors, <b>N</b> to show verbose output information.</td>
- * </tr>
- * <tr>
- * <td><tt>CPPCHECK_FLAGS</tt></td>
- * <td>Extra flags to pass to <tt>cppcheck</tt>, after the automatically generated flags.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_CPPCHECK_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_CPPCHECK_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
- /** \page Page_BuildModule_DFU The DFU build module
- *
- * The DFU programming utility LUFA build system module, providing targets to reprogram an
- * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
- * This module requires a DFU class bootloader to be running in the target, compatible with
- * the DFU bootloader protocol as published by Atmel.
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_dfu.mk
- * \endcode
- *
- * \section SSec_BuildModule_DFU_Requirements Requirements
- * This module requires either the <tt>batchisp</tt> utility from Atmel's FLIP utility, or the open
- * source <tt>dfu-programmer</tt> utility (<a>http://dfu-programmer.sourceforge.net/</a>) to be
- * available in your system's <b>PATH</b> variable. On *nix systems the <tt>dfu-programmer</tt> utility
- * can be installed via the project's source code or through the package manager.
- *
- * \section SSec_BuildModule_DFU_Targets Targets
- *
- * <table>
- * <tr>
- * <td><tt>dfu</tt></td>
- * <td>Program the device FLASH memory with the application's executable data using <tt>dfu-programmer</tt>.</td>
- * </tr>
- * <tr>
- * <td><tt>dfu-ee</tt></td>
- * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>dfu-programmer</tt>.</td>
- * </tr>
- * <tr>
- * <td><tt>flip</tt></td>
- * <td>Program the device FLASH memory with the application's executable data using <tt>batchisp</tt>.</td>
- * </tr>
- * <tr>
- * <td><tt>flip-ee</tt></td>
- * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>batchisp</tt>.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_DFU_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><tt>MCU</tt></td>
- * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>TARGET</tt></td>
- * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_DFU_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_DFU_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_DFU_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
- /** \page Page_BuildModule_DOXYGEN The DOXYGEN build module
- *
- * The DOXYGEN code documentation utility LUFA build system module, providing targets to generate
- * project HTML and other format documentation from a set of source files that include special
- * Doxygen comments.
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_doxygen.mk
- * \endcode
- *
- * \section SSec_BuildModule_DOXYGEN_Requirements Requirements
- * This module requires the <tt>doxygen</tt> utility from the Doxygen website
- * (<a>http://www.doxygen.org/</a>) to be available in your system's <b>PATH</b> variable. On *nix
- * systems the <tt>doxygen</tt> utility can be installed via the project's source code or through
- * the package manager.
- *
- * \section SSec_BuildModule_DOXYGEN_Targets Targets
- *
- * <table>
- * <tr>
- * <td><tt>doxygen</tt></td>
- * <td>Generate project documentation.</td>
- * </tr>
- * <tr>
- * <td><tt>doxygen_create</tt></td>
- * <td>Create a new Doxygen configuration file using the latest template.</td>
- * </tr>
- * <tr>
- * <td><tt>doxygen_upgrade</tt></td>
- * <td>Upgrade an existing Doxygen configuration file to the latest template</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_DOXYGEN_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><tt>LUFA_PATH</tt></td>
- * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_DOXYGEN_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><tt>DOXYGEN_CONF</tt></td>
- * <td>Name and path of the base Doxygen configuration file for the project.</td>
- * </tr>
- * <tr>
- * <td><tt>DOXYGEN_FAIL_ON_WARNING</tt></td>
- * <td>Set to <b>Y</b> to fail the generation with an error exit code if warnings are found other than unsupported configuration parameters, <b>N</b> to continue without failing.</td>
- * </tr>
- * <tr>
- * <td><tt>DOXYGEN_OVERRIDE_PARAMS</tt></td>
- * <td>Extra Doxygen configuration parameters to apply, overriding the corresponding config entry in the project's configuration file (e.g. <tt>QUIET=YES</tt>).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_DOXYGEN_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_DOXYGEN_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
- /** \page Page_BuildModule_HID The HID build module
- *
- * The HID programming utility LUFA build system module, providing targets to reprogram an
- * Atmel processor's FLASH memory with a project's compiled binary output file. This module
- * requires a HID class bootloader to be running in the target, using a protocol compatible
- * with the PJRC "HalfKay" protocol (<a>http://www.pjrc.com/teensy/halfkay_protocol.html</a>).
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_hid.mk
- * \endcode
- *
- * \section SSec_BuildModule_HID_Requirements Requirements
- * This module requires either the <tt>hid_bootloader_cli</tt> utility from the included LUFA HID
- * class bootloader API subdirectory, or the <tt>teensy_loader_cli</tt> utility from PJRC
- * (<a>http://www.pjrc.com/teensy/loader_cli.html</a>) to be available in your system's <b>PATH</b>
- * variable.
- *
- * \section SSec_BuildModule_HID_Targets Targets
- *
- * <table>
- * <tr>
- * <td><tt>hid</tt></td>
- * <td>Program the device FLASH memory with the application's executable data using <tt>hid_bootloader_cli</tt>.</td>
- * </tr>
- * <tr>
- * <td><tt>hid-ee</tt></td>
- * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>hid_bootloader_cli</tt> and
- * a temporary AVR application programmed into the target's FLASH.
- * \note This will erase the currently loaded application in the target.</td>
- * </tr>
- * <tr>
- * <td><tt>teensy</tt></td>
- * <td>Program the device FLASH memory with the application's executable data using <tt>teensy_loader_cli</tt>.</td>
- * </tr>
- * <tr>
- * <td><tt>teensy-ee</tt></td>
- * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>teensy_loader_cli</tt> and
- * a temporary AVR application programmed into the target's FLASH.
- * \note This will erase the currently loaded application in the target.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_HID_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><tt>MCU</tt></td>
- * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>TARGET</tt></td>
- * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_HID_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_HID_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_HID_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
- /** \page Page_BuildModule_SOURCES The SOURCES build module
- *
- * The SOURCES LUFA build system module, providing variables listing the various LUFA source files
- * required to be build by a project for a given LUFA module. This module gives a way to reference
- * LUFA source files symbolically, so that changes to the library structure do not break the library
- * makefile.
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_sources.mk
- * \endcode
- *
- * \section SSec_BuildModule_SOURCES_Requirements Requirements
- * None.
- *
- * \section SSec_BuildModule_SOURCES_Targets Targets
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_SOURCES_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><tt>LUFA_PATH</tt></td>
- * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>ARCH</tt></td>
- * <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_SOURCES_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_SOURCES_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><tt>LUFA_SRC_USB</tt></td>
- * <td>List of LUFA USB driver source files.</td>
- * </tr>
- * <tr>
- * <td><tt>LUFA_SRC_USBCLASS</tt></td>
- * <td>List of LUFA USB Class driver source files.</td>
- * </tr>
- * <tr>
- * <td><tt>LUFA_SRC_TEMPERATURE</tt></td>
- * <td>List of LUFA temperature sensor driver source files.</td>
- * </tr>
- * <tr>
- * <td><tt>LUFA_SRC_SERIAL</tt></td>
- * <td>List of LUFA Serial U(S)ART driver source files.</td>
- * </tr>
- * <tr>
- * <td><tt>LUFA_SRC_TWI</tt></td>
- * <td>List of LUFA TWI driver source files.</td>
- * </tr>
- * <tr>
- * <td><tt>LUFA_SRC_PLATFORM</tt></td>
- * <td>List of LUFA architecture specific platform management source files.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_SOURCES_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
-/** \page Page_BuildTroubleshooting Troubleshooting Information
- *
- * LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and surrounding binaries. This can sometimes lead to problems compiling applications if one of these
- * features is buggy in the version of the tools used in a build environment. Missing utilities and incorrectly set makefile configuration options can also result in different
- * errors being produced when compilation or other operations are attempted. The table below lists a set of commonly encountered errors and their resolutions.
- *
- * <table>
- * <tr>
- * <th>Problem</th>
- * <th>Resolution</th>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>&quot; shown when compiling.</td>
- * <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt>
- * from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>&quot; shown when compiling.</td>
- * <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>&quot; shown when compiling.</td>
- * <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with
- * GNU make or other variants of Make causing an infinitely recursive build.</td>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>Unsupported architecture &quot;<i>{X}</i>&quot;</tt></b>&quot; shown when compiling.</td>
- * <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>Makefile <i>{X}</i> value not set</tt></b>&quot; shown when compiling.</td>
- * <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA
- * build system modules. Define the value in your project makefile and try again.</td>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>&quot; shown when compiling.</td>
- * <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration
- * option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>&quot; shown when compiling.</td>
- * <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No").
- * This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>&quot; shown when compiling.</td>
- * <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not
- * recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>&quot; shown when compiling.</td>
- * <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path.
- * This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>Source file does not exist: <i>{X}</i></tt></b>&quot; shown when compiling.</td>
- * <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or
- * relative path given in the user project makefile is correct and try again.</td>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>&quot; shown when upgrading a Doxygen configuration file.</td>
- * <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists
- * and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration
- * file.</td>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>
- * <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration
- * options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or
- * upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>&quot; shown when make is invoked.</td>
- * <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or
- * absolute path to the LUFA library core.</td>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>&quot; shown when compiling.</td>
- * <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be
- * found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt>
- * parameter.</td>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>&quot; shown when compiling a bootloader.</td>
- * <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This
- * usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the
- * compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>&quot; shown when compiling.</td>
- * <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the
- * version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td>
- * </tr>
- * <tr>
- * <td>Error &quot;<b><tt>undefined reference to `<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>
- * <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA
- * library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_SOURCES).</td>
- * </tr>
- * </table>
- *
- * For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp.
- */
+/** \file
+ *
+ * This file contains special DoxyGen information for the generation of the main page and other special
+ * documentation pages. It is not a project source file.
+ */
+
+/** \page Page_BuildSystem The LUFA Build System
+ *
+ * \section Sec_BuildSystem_Overview Overview of the LUFA Build System
+ * The LUFA build system is an attempt at making a set of re-usable, modular build make files which
+ * can be referenced in a LUFA powered project, to minimize the amount of code required in an
+ * application makefile. The system is written in GNU Make, and each module is independent of
+ * one-another.
+ *
+ * For details on the prerequisites needed for Linux and Windows machines to be able to use the LUFA
+ * build system, see \ref Sec_CompilingApps_Prerequisites.
+ *
+ * To use a LUFA build system module, simply add an include to your project makefile. All user projects
+ * should at a minimum include \ref Page_BuildModule_CORE for base functionality:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_core.mk
+ * \endcode
+ *
+ * Once included in your project makefile, the associated build module targets will be added to your
+ * project's build makefile targets automatically. To call a build target, run <tt>make {TARGET_NAME}</tt>
+ * from the command line, substituting in the appropriate target name.
+ *
+ * \see \ref Sec_ConfiguringApps_AppMakefileParams for a copy of the sample LUFA project makefile.
+ *
+ * Each build module may have one or more mandatory parameters (GNU Make variables) which <i>must</i>
+ * be supplied in the project makefile for the module to work, and one or more optional parameters which
+ * may be defined and which will assume a sensible default if not.
+ *
+ * \section SSec_BuildSystem_Modules Available Modules
+ *
+ * The following modules are included in this LUFA release:
+ *
+ * \li \subpage Page_BuildModule_ATPROGRAM - Device Programming
+ * \li \subpage Page_BuildModule_AVRDUDE - Device Programming
+ * \li \subpage Page_BuildModule_BUILD - Compiling/Assembling/Linking
+ * \li \subpage Page_BuildModule_CORE - Core Build System Functions
+ * \li \subpage Page_BuildModule_CPPCHECK - Static Code Analysis
+ * \li \subpage Page_BuildModule_DFU - Device Programming
+ * \li \subpage Page_BuildModule_DOXYGEN - Automated Source Code Documentation
+ * \li \subpage Page_BuildModule_HID - Device Programming
+ * \li \subpage Page_BuildModule_SOURCES - LUFA Module Source Code Variables
+ *
+ * If you have problems building using the LUFA build system, see \subpage Page_BuildTroubleshooting for resolution steps.
+ */
+
+ /** \page Page_BuildModule_BUILD The BUILD build module
+ *
+ * The BUILD LUFA build system module, providing targets for the compilation,
+ * assembling and linking of an application from source code into binary files
+ * suitable for programming into a target device, using the GCC compiler.
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_build.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_BUILD_Requirements Requirements
+ * This module requires the the architecture appropriate binaries of the GCC compiler are available in your
+ * system's <b>PATH</b> variable. The GCC compiler and associated toolchain is distributed in Atmel AVR Studio
+ * 5.x and Atmel Studio 6.x installation directories, as well as in many third party distribution packages.
+ *
+ * \section SSec_BuildModule_BUILD_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><tt>size</tt></td>
+ * <td>Display size of the compiled application FLASH and SRAM segments.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>symbol-sizes</tt></td>
+ * <td>Display a size-sorted list of symbols from the compiled application, in decimal bytes.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>lib</tt></td>
+ * <td>Build and archive all source files into a library A binary file.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>all</tt></td>
+ * <td>Build and link the application into ELF debug and HEX binary files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>elf</tt></td>
+ * <td>Build and link the application into an ELF debug file.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>bin</tt></td>
+ * <td>Build and link the application and produce a BIN binary file.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>hex</tt></td>
+ * <td>Build and link the application and produce HEX and EEP binary files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>lss</tt></td>
+ * <td>Build and link the application and produce a LSS source code/assembly code mixed listing file.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>clean</tt></td>
+ * <td>Remove all intermediary files and binary output files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>mostlyclean</tt></td>
+ * <td>Remove all intermediary files but preserve any binary output files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt><i>&lt;filename&gt;</i>.s</tt></td>
+ * <td>Create an assembly listing of a given input C/C++ source file.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_BUILD_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>TARGET</tt></td>
+ * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>ARCH</tt></td>
+ * <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>MCU</tt></td>
+ * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>SRC</tt></td>
+ * <td>List of relative or absolute paths to the application C (.c), C++ (.cpp) and Assembly (.S) source files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>F_USB</tt></td>
+ * <td>Speed in Hz of the input clock frequency to the target's USB controller.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>LUFA_PATH</tt></td>
+ * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_BUILD_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>BOARD</tt></td>
+ * <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>OPTIMIZATION</tt></td>
+ * <td>Optimization level to use when compiling source files (see GCC manual).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>C_STANDARD</tt></td>
+ * <td>Version of the C standard to apply when compiling C++ source files (see GCC manual).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPP_STANDARD</tt></td>
+ * <td>Version of the C++ standard to apply when compiling C++ source files (see GCC manual).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>DEBUG_FORMAT</tt></td>
+ * <td>Format of the debug information to embed in the generated object files (see GCC manual).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>DEBUG_LEVEL</tt></td>
+ * <td>Level of the debugging information to embed in the generated object files (see GCC manual).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>F_CPU</tt></td>
+ * <td>Speed of the processor CPU clock, in Hz.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>C_FLAGS</tt></td>
+ * <td>Flags to pass to the C compiler only, after the automatically generated flags.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPP_FLAGS</tt></td>
+ * <td>Flags to pass to the C++ compiler only, after the automatically generated flags.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>ASM_FLAGS</tt></td>
+ * <td>Flags to pass to the assembler only, after the automatically generated flags.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CC_FLAGS</tt></td>
+ * <td>Common flags to pass to the C/C++ compiler and assembler, after the automatically generated flags.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>COMPILER_PATH</tt></td>
+ * <td>Directory where the C/C++ toolchain is located, if not available in the system <tt>PATH</tt>.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>LD_FLAGS</tt></td>
+ * <td>Flags to pass to the linker, after the automatically generated flags.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>LINKER_RELAXATIONS</tt></td>
+ * <td>Enables or disables linker relaxations when linking the application binary. This can reduce the total size
+ * of the application by replacing full \c CALL instructions with smaller \c RCALL instructions where possible.
+ * \note On some unpatched versions of binutils, this can cause link failures in some circumstances. If you
+ * receive a link error <tt>relocation truncated to fit: R_AVR_13_PCREL</tt>, disable this setting.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>OBJDIR</tt></td>
+ * <td>Directory to place the generated object and dependency files. If set to "." the same folder as the source file will be used.
+ * \note When this option is enabled, all source filenames <b>must</b> be unique.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>OBJECT_FILES</tt></td>
+ * <td>List of additional object files that should be linked into the resulting binary.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_BUILD_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_BUILD_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+/** \page Page_BuildModule_CORE The CORE build module
+ *
+ * The core LUFA build system module, providing common build system help and information targets.
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_core.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_CORE_Requirements Requirements
+ * This module has no requirements outside a standard *nix shell like environment; the <tt>sh</tt>
+ * shell, GNU <tt>make</tt> and *nix CoreUtils (<tt>echo</tt>, <tt>printf</tt>, etc.).
+ *
+ * \section SSec_BuildModule_CORE_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><tt>help</tt></td>
+ * <td>Display build system help and configuration information.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>list_targets</tt></td>
+ * <td>List all available build targets from the build system.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>list_modules</tt></td>
+ * <td>List all available build modules from the build system.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>list_mandatory</tt></td>
+ * <td>List all mandatory parameters required by the included modules.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>list_optional</tt></td>
+ * <td>List all optional parameters required by the included modules.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>list_provided</tt></td>
+ * <td>List all variables provided by the included modules.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>list_macros</tt></td>
+ * <td>List all macros provided by the included modules.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_CORE_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_CORE_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_CORE_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_CORE_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+/** \page Page_BuildModule_ATPROGRAM The ATPROGRAM build module
+ *
+ * The ATPROGRAM programming utility LUFA build system module, providing targets to reprogram an
+ * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_atprogram.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_ATPROGRAM_Requirements Requirements
+ * This module requires the <tt>atprogram.exe</tt> utility to be available in your system's <b>PATH</b>
+ * variable. The <tt>atprogram.exe</tt> utility is distributed in Atmel AVR Studio 5.x and Atmel Studio 6.x
+ * inside the application install folder's "\atbackend" subdirectory.
+ *
+ * \section SSec_BuildModule_ATPROGRAM_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><tt>atprogram</tt></td>
+ * <td>Program the device FLASH memory with the application's executable data.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>atprogram-ee</tt></td>
+ * <td>Program the device EEPROM memory with the application's EEPROM data.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_ATPROGRAM_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>MCU</tt></td>
+ * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>TARGET</tt></td>
+ * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_ATPROGRAM_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>ATPROGRAM_PROGRAMMER</tt></td>
+ * <td>Name of the Atmel programmer or debugger tool to communicate with (e.g. <tt>jtagice3</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>ATPROGRAM_INTERFACE</tt></td>
+ * <td>Name of the programming interface to use when programming the target (e.g. <tt>spi</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>ATPROGRAM_PORT</tt></td>
+ * <td>Name of the communication port to use when when programming with a serially connected tool (e.g. <tt>COM2</tt>).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_ATPROGRAM_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_ATPROGRAM_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+/** \page Page_BuildModule_AVRDUDE The AVRDUDE build module
+ *
+ * The AVRDUDE programming utility LUFA build system module, providing targets to reprogram an
+ * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_avrdude.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_AVRDUDE_Requirements Requirements
+ * This module requires the <tt>avrdude</tt> utility to be available in your system's <b>PATH</b>
+ * variable. The <tt>avrdude</tt> utility is distributed in the old WinAVR project releases for
+ * Windows (<a>http://winavr.sourceforge.net</a>) or can be installed on *nix systems via the project's
+ * source code (<a>https://savannah.nongnu.org/projects/avrdude</a>) or through the package manager.
+ *
+ * \section SSec_BuildModule_AVRDUDE_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><tt>avrdude</tt></td>
+ * <td>Program the device FLASH memory with the application's executable data.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>avrdude-ee</tt></td>
+ * <td>Program the device EEPROM memory with the application's EEPROM data.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_AVRDUDE_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>MCU</tt></td>
+ * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>TARGET</tt></td>
+ * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_AVRDUDE_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>AVRDUDE_PROGRAMMER</tt></td>
+ * <td>Name of the programmer or debugger tool to communicate with (e.g. <tt>jtagicemkii</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>AVRDUDE_PORT</tt></td>
+ * <td>Name of the communication port to use when when programming with the connected tool (e.g. <tt>COM2</tt>, <tt>/dev/ttyUSB0</tt> or <tt>usb</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>AVRDUDE_FLAGS</tt></td>
+ * <td>Additional flags to pass to avrdude when programming, applied after the automatically generated flags.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_AVRDUDE_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_AVRDUDE_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+ /** \page Page_BuildModule_CPPCHECK The CPPCHECK build module
+ *
+ * The CPPCHECK programming utility LUFA build system module, providing targets to statically
+ * analyze C and C++ source code for errors and performance/style issues.
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_CPPCHECK_Requirements Requirements
+ * This module requires the <tt>cppcheck</tt> utility to be available in your system's <b>PATH</b>
+ * variable. The <tt>cppcheck</tt> utility is distributed through the project's home page
+ * (<a>http://cppcheck.sourceforge.net</a>) for Windows, and can be installed on *nix systems via
+ * the project's source code or through the package manager.
+ *
+ * \section SSec_BuildModule_CPPCHECK_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><tt>cppcheck</tt></td>
+ * <td>Statically analyze the project source code for issues.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>cppcheck-config</tt></td>
+ * <td>Check the <tt>cppcheck</tt> configuration - scan source code and warn about missing header files and other issues.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_CPPCHECK_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>SRC</tt></td>
+ * <td>List of source files to statically analyze.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_CPPCHECK_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>CPPCHECK_INCLUDES</tt></td>
+ * <td>Path of extra directories to check when attemting to resolve C/C++ header file includes.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPPCHECK_EXCLUDES</tt></td>
+ * <td>Paths or path fragments to exclude when analyzing.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPPCHECK_MSG_TEMPLATE</tt></td>
+ * <td>Output message template to use when printing errors, warnings and information (see <tt>cppcheck</tt> documentation).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPPCHECK_ENABLE</tt></td>
+ * <td>Analysis rule categories to enable (see <tt>cppcheck</tt> documentation).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPPCHECK_SUPPRESS</tt></td>
+ * <td>Specific analysis rules to suppress (see <tt>cppcheck</tt> documentation).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPPCHECK_FAIL_ON_WARNING</tt></td>
+ * <td>Set to <b>Y</b> to fail the analysis job with an error exit code if warnings are found, <b>N</b> to continue without failing.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPPCHECK_QUIET</tt></td>
+ * <td>Set to <b>Y</b> to suppress all output except warnings and errors, <b>N</b> to show verbose output information.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPPCHECK_FLAGS</tt></td>
+ * <td>Extra flags to pass to <tt>cppcheck</tt>, after the automatically generated flags.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_CPPCHECK_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_CPPCHECK_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+ /** \page Page_BuildModule_DFU The DFU build module
+ *
+ * The DFU programming utility LUFA build system module, providing targets to reprogram an
+ * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
+ * This module requires a DFU class bootloader to be running in the target, compatible with
+ * the DFU bootloader protocol as published by Atmel.
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_dfu.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_DFU_Requirements Requirements
+ * This module requires either the <tt>batchisp</tt> utility from Atmel's FLIP utility, or the open
+ * source <tt>dfu-programmer</tt> utility (<a>http://dfu-programmer.sourceforge.net/</a>) to be
+ * available in your system's <b>PATH</b> variable. On *nix systems the <tt>dfu-programmer</tt> utility
+ * can be installed via the project's source code or through the package manager.
+ *
+ * \section SSec_BuildModule_DFU_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><tt>dfu</tt></td>
+ * <td>Program the device FLASH memory with the application's executable data using <tt>dfu-programmer</tt>.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>dfu-ee</tt></td>
+ * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>dfu-programmer</tt>.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>flip</tt></td>
+ * <td>Program the device FLASH memory with the application's executable data using <tt>batchisp</tt>.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>flip-ee</tt></td>
+ * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>batchisp</tt>.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_DFU_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>MCU</tt></td>
+ * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>TARGET</tt></td>
+ * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_DFU_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_DFU_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_DFU_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+ /** \page Page_BuildModule_DOXYGEN The DOXYGEN build module
+ *
+ * The DOXYGEN code documentation utility LUFA build system module, providing targets to generate
+ * project HTML and other format documentation from a set of source files that include special
+ * Doxygen comments.
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_doxygen.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_DOXYGEN_Requirements Requirements
+ * This module requires the <tt>doxygen</tt> utility from the Doxygen website
+ * (<a>http://www.doxygen.org/</a>) to be available in your system's <b>PATH</b> variable. On *nix
+ * systems the <tt>doxygen</tt> utility can be installed via the project's source code or through
+ * the package manager.
+ *
+ * \section SSec_BuildModule_DOXYGEN_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><tt>doxygen</tt></td>
+ * <td>Generate project documentation.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>doxygen_create</tt></td>
+ * <td>Create a new Doxygen configuration file using the latest template.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>doxygen_upgrade</tt></td>
+ * <td>Upgrade an existing Doxygen configuration file to the latest template</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_DOXYGEN_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>LUFA_PATH</tt></td>
+ * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_DOXYGEN_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>DOXYGEN_CONF</tt></td>
+ * <td>Name and path of the base Doxygen configuration file for the project.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>DOXYGEN_FAIL_ON_WARNING</tt></td>
+ * <td>Set to <b>Y</b> to fail the generation with an error exit code if warnings are found other than unsupported configuration parameters, <b>N</b> to continue without failing.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>DOXYGEN_OVERRIDE_PARAMS</tt></td>
+ * <td>Extra Doxygen configuration parameters to apply, overriding the corresponding config entry in the project's configuration file (e.g. <tt>QUIET=YES</tt>).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_DOXYGEN_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_DOXYGEN_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+ /** \page Page_BuildModule_HID The HID build module
+ *
+ * The HID programming utility LUFA build system module, providing targets to reprogram an
+ * Atmel processor's FLASH memory with a project's compiled binary output file. This module
+ * requires a HID class bootloader to be running in the target, using a protocol compatible
+ * with the PJRC "HalfKay" protocol (<a>http://www.pjrc.com/teensy/halfkay_protocol.html</a>).
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_hid.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_HID_Requirements Requirements
+ * This module requires either the <tt>hid_bootloader_cli</tt> utility from the included LUFA HID
+ * class bootloader API subdirectory, or the <tt>teensy_loader_cli</tt> utility from PJRC
+ * (<a>http://www.pjrc.com/teensy/loader_cli.html</a>) to be available in your system's <b>PATH</b>
+ * variable.
+ *
+ * \section SSec_BuildModule_HID_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><tt>hid</tt></td>
+ * <td>Program the device FLASH memory with the application's executable data using <tt>hid_bootloader_cli</tt>.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>hid-ee</tt></td>
+ * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>hid_bootloader_cli</tt> and
+ * a temporary AVR application programmed into the target's FLASH.
+ * \note This will erase the currently loaded application in the target.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>teensy</tt></td>
+ * <td>Program the device FLASH memory with the application's executable data using <tt>teensy_loader_cli</tt>.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>teensy-ee</tt></td>
+ * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>teensy_loader_cli</tt> and
+ * a temporary AVR application programmed into the target's FLASH.
+ * \note This will erase the currently loaded application in the target.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_HID_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>MCU</tt></td>
+ * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>TARGET</tt></td>
+ * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_HID_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_HID_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_HID_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+ /** \page Page_BuildModule_SOURCES The SOURCES build module
+ *
+ * The SOURCES LUFA build system module, providing variables listing the various LUFA source files
+ * required to be build by a project for a given LUFA module. This module gives a way to reference
+ * LUFA source files symbolically, so that changes to the library structure do not break the library
+ * makefile.
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_sources.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_SOURCES_Requirements Requirements
+ * None.
+ *
+ * \section SSec_BuildModule_SOURCES_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_SOURCES_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>LUFA_PATH</tt></td>
+ * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>ARCH</tt></td>
+ * <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_SOURCES_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_SOURCES_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><tt>LUFA_SRC_USB</tt></td>
+ * <td>List of LUFA USB driver source files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>LUFA_SRC_USBCLASS</tt></td>
+ * <td>List of LUFA USB Class driver source files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>LUFA_SRC_TEMPERATURE</tt></td>
+ * <td>List of LUFA temperature sensor driver source files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>LUFA_SRC_SERIAL</tt></td>
+ * <td>List of LUFA Serial U(S)ART driver source files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>LUFA_SRC_TWI</tt></td>
+ * <td>List of LUFA TWI driver source files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>LUFA_SRC_PLATFORM</tt></td>
+ * <td>List of LUFA architecture specific platform management source files.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_SOURCES_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+/** \page Page_BuildTroubleshooting Troubleshooting Information
+ *
+ * LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and surrounding binaries. This can sometimes lead to problems compiling applications if one of these
+ * features is buggy in the version of the tools used in a build environment. Missing utilities and incorrectly set makefile configuration options can also result in different
+ * errors being produced when compilation or other operations are attempted. The table below lists a set of commonly encountered errors and their resolutions.
+ *
+ * <table>
+ * <tr>
+ * <th>Problem</th>
+ * <th>Resolution</th>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>&quot; shown when compiling.</td>
+ * <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt>
+ * from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>&quot; shown when compiling.</td>
+ * <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>&quot; shown when compiling.</td>
+ * <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with
+ * GNU make or other variants of Make causing an infinitely recursive build.</td>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>Unsupported architecture &quot;<i>{X}</i>&quot;</tt></b>&quot; shown when compiling.</td>
+ * <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>Makefile <i>{X}</i> value not set</tt></b>&quot; shown when compiling.</td>
+ * <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA
+ * build system modules. Define the value in your project makefile and try again.</td>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>&quot; shown when compiling.</td>
+ * <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration
+ * option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>&quot; shown when compiling.</td>
+ * <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No").
+ * This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>&quot; shown when compiling.</td>
+ * <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not
+ * recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>&quot; shown when compiling.</td>
+ * <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path.
+ * This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>Source file does not exist: <i>{X}</i></tt></b>&quot; shown when compiling.</td>
+ * <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or
+ * relative path given in the user project makefile is correct and try again.</td>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>&quot; shown when upgrading a Doxygen configuration file.</td>
+ * <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists
+ * and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration
+ * file.</td>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>
+ * <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration
+ * options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or
+ * upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>&quot; shown when make is invoked.</td>
+ * <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or
+ * absolute path to the LUFA library core.</td>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>&quot; shown when compiling.</td>
+ * <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be
+ * found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt>
+ * parameter.</td>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>&quot; shown when compiling a bootloader.</td>
+ * <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This
+ * usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the
+ * compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>&quot; shown when compiling.</td>
+ * <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the
+ * version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td>
+ * </tr>
+ * <tr>
+ * <td>Error &quot;<b><tt>undefined reference to `<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>
+ * <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA
+ * library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_SOURCES).</td>
+ * </tr>
+ * </table>
+ *
+ * For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp.
+ */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 13:07:24 +0000