diff options
Diffstat (limited to 'tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Device.h')
-rw-r--r-- | tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Device.h | 159 |
1 files changed, 0 insertions, 159 deletions
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Device.h b/tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Device.h deleted file mode 100644 index 10d739f569..0000000000 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Device.h +++ /dev/null @@ -1,159 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Common USB Device definitions for all architectures. - * \copydetails Group_Device - * - * \note This file should not be included directly. It is automatically included as needed by the USB driver - * dispatch header located in LUFA/Drivers/USB/USB.h. - */ - -/** \ingroup Group_USB - * \defgroup Group_Device Device Management - * \brief USB Device management definitions for USB device mode. - * - * USB Device mode related definitions common to all architectures. This module contains definitions which - * are used when the USB controller is initialized in device mode. - * - * @{ - */ - -#ifndef __USBDEVICE_H__ -#define __USBDEVICE_H__ - - /* Includes: */ - #include "../../../Common/Common.h" - #include "USBMode.h" - #include "StdDescriptors.h" - #include "USBInterrupt.h" - #include "Endpoint.h" - - /* Enable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - extern "C" { - #endif - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_USB_DRIVER) - #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. - #endif - - /* Public Interface - May be used in end-application: */ - /* Enums: */ - /** Enum for the various states of the USB Device state machine. Only some states are - * implemented in the LUFA library - other states are left to the user to implement. - * - * For information on each possible USB device state, refer to the USB 2.0 specification. - * - * \see \ref USB_DeviceState, which stores the current device state machine state. - */ - enum USB_Device_States_t - { - DEVICE_STATE_Unattached = 0, /**< Internally implemented by the library. This state indicates - * that the device is not currently connected to a host. - */ - DEVICE_STATE_Powered = 1, /**< Internally implemented by the library. This state indicates - * that the device is connected to a host, but enumeration has not - * yet begun. - */ - DEVICE_STATE_Default = 2, /**< Internally implemented by the library. This state indicates - * that the device's USB bus has been reset by the host and it is - * now waiting for the host to begin the enumeration process. - */ - DEVICE_STATE_Addressed = 3, /**< Internally implemented by the library. This state indicates - * that the device has been addressed by the USB Host, but is not - * yet configured. - */ - DEVICE_STATE_Configured = 4, /**< May be implemented by the user project. This state indicates - * that the device has been enumerated by the host and is ready - * for USB communications to begin. - */ - DEVICE_STATE_Suspended = 5, /**< May be implemented by the user project. This state indicates - * that the USB bus has been suspended by the host, and the device - * should power down to a minimal power level until the bus is - * resumed. - */ - }; - - /* Function Prototypes: */ - /** Function to retrieve a given descriptor's size and memory location from the given descriptor type value, - * index and language ID. This function MUST be overridden in the user application (added with full, identical - * prototype and name so that the library can call it to retrieve descriptor data. - * - * \param[in] wValue The type of the descriptor to retrieve in the upper byte, and the index in the - * lower byte (when more than one descriptor of the given type exists, such as the - * case of string descriptors). The type may be one of the standard types defined - * in the DescriptorTypes_t enum, or may be a class-specific descriptor type value. - * \param[in] wIndex The language ID of the string to return if the \c wValue type indicates - * \ref DTYPE_String, otherwise zero for standard descriptors, or as defined in a - * class-specific standards. - * \param[out] DescriptorAddress Pointer to the descriptor in memory. This should be set by the routine to - * the address of the descriptor. - * \param[out] DescriptorMemorySpace A value from the \ref USB_DescriptorMemorySpaces_t enum to indicate the memory - * space in which the descriptor is stored. This parameter does not exist when one - * of the \c USE_*_DESCRIPTORS compile time options is used, or on architectures which - * use a unified address space. - * - * \note By default, the library expects all descriptors to be located in flash memory via the \c PROGMEM attribute. - * If descriptors should be located in RAM or EEPROM instead (to speed up access in the case of RAM, or to - * allow the descriptors to be changed dynamically at runtime) either the \c USE_RAM_DESCRIPTORS or the - * \c USE_EEPROM_DESCRIPTORS tokens may be defined in the project makefile and passed to the compiler by the -D - * switch. - * - * \return Size in bytes of the descriptor if it exists, zero or \ref NO_DESCRIPTOR otherwise. - */ - uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, - const uint8_t wIndex, - const void** const DescriptorAddress - #if (defined(ARCH_HAS_MULTI_ADDRESS_SPACE) || defined(__DOXYGEN__)) && \ - !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS)) - , uint8_t* const DescriptorMemorySpace - #endif - ) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); - - /* Architecture Includes: */ - #if (ARCH == ARCH_AVR8) - #include "AVR8/Device_AVR8.h" - #elif (ARCH == ARCH_UC3) - #include "UC3/Device_UC3.h" - #elif (ARCH == ARCH_XMEGA) - #include "XMEGA/Device_XMEGA.h" - #endif - - /* Disable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - } - #endif - -#endif - -/** @} */ - |