diff options
Diffstat (limited to 'quantum/config_common.h')
| -rw-r--r-- | quantum/config_common.h | 125 |
1 files changed, 64 insertions, 61 deletions
diff --git a/quantum/config_common.h b/quantum/config_common.h index da53fce89b..02f11d979c 100644 --- a/quantum/config_common.h +++ b/quantum/config_common.h @@ -1,70 +1,74 @@ #ifndef CONFIG_DEFINITIONS_H #define CONFIG_DEFINITIONS_H -#define B0 0x20 -#define B1 0x21 -#define B2 0x22 -#define B3 0x23 -#define B4 0x24 -#define B5 0x25 -#define B6 0x26 -#define B7 0x27 -#define C0 0x30 -#define C1 0x31 -#define C2 0x32 -#define C3 0x33 -#define C4 0x34 -#define C5 0x35 -#define C6 0x36 -#define C7 0x37 -#define D0 0x40 -#define D1 0x41 -#define D2 0x42 -#define D3 0x43 -#define D4 0x44 -#define D5 0x45 -#define D6 0x46 -#define D7 0x47 -#define E0 0x50 -#define E1 0x51 -#define E2 0x52 -#define E3 0x53 -#define E4 0x54 -#define E5 0x55 -#define E6 0x56 -#define E7 0x57 -#define F0 0x60 -#define F1 0x61 -#define F2 0x62 -#define F3 0x63 -#define F4 0x64 -#define F5 0x65 -#define F6 0x66 -#define F7 0x67 - -#define COL2ROW 0x0 -#define ROW2COL 0x1 +/* diode directions */ +#define COL2ROW 0 +#define ROW2COL 1 +/* I/O pins */ +#define B0 { .input_addr = 3, .bit = 0 } +#define B1 { .input_addr = 3, .bit = 1 } +#define B2 { .input_addr = 3, .bit = 2 } +#define B3 { .input_addr = 3, .bit = 3 } +#define B4 { .input_addr = 3, .bit = 4 } +#define B5 { .input_addr = 3, .bit = 5 } +#define B6 { .input_addr = 3, .bit = 6 } +#define B7 { .input_addr = 3, .bit = 7 } +#define C0 { .input_addr = 6, .bit = 0 } +#define C1 { .input_addr = 6, .bit = 1 } +#define C2 { .input_addr = 6, .bit = 2 } +#define C3 { .input_addr = 6, .bit = 3 } +#define C4 { .input_addr = 6, .bit = 4 } +#define C5 { .input_addr = 6, .bit = 5 } +#define C6 { .input_addr = 6, .bit = 6 } +#define C7 { .input_addr = 6, .bit = 7 } +#define D0 { .input_addr = 9, .bit = 0 } +#define D1 { .input_addr = 9, .bit = 1 } +#define D2 { .input_addr = 9, .bit = 2 } +#define D3 { .input_addr = 9, .bit = 3 } +#define D4 { .input_addr = 9, .bit = 4 } +#define D5 { .input_addr = 9, .bit = 5 } +#define D6 { .input_addr = 9, .bit = 6 } +#define D7 { .input_addr = 9, .bit = 7 } +#define E0 { .input_addr = 0xC, .bit = 0 } +#define E1 { .input_addr = 0xC, .bit = 1 } +#define E2 { .input_addr = 0xC, .bit = 2 } +#define E3 { .input_addr = 0xC, .bit = 3 } +#define E4 { .input_addr = 0xC, .bit = 4 } +#define E5 { .input_addr = 0xC, .bit = 5 } +#define E6 { .input_addr = 0xC, .bit = 6 } +#define E7 { .input_addr = 0xC, .bit = 7 } +#define F0 { .input_addr = 0xF, .bit = 0 } +#define F1 { .input_addr = 0xF, .bit = 1 } +#define F2 { .input_addr = 0xF, .bit = 2 } +#define F3 { .input_addr = 0xF, .bit = 3 } +#define F4 { .input_addr = 0xF, .bit = 4 } +#define F5 { .input_addr = 0xF, .bit = 5 } +#define F6 { .input_addr = 0xF, .bit = 6 } +#define F7 { .input_addr = 0xF, .bit = 7 } +/* USART configuration */ #ifdef BLUETOOTH_ENABLE -#ifdef __AVR_ATmega32U4__ - #define SERIAL_UART_BAUD 9600 - #define SERIAL_UART_DATA UDR1 - #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1) - #define SERIAL_UART_RXD_VECT USART1_RX_vect - #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) - #define SERIAL_UART_INIT() do { \ - UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ - UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \ - UCSR1B = (1<<TXEN1); /* TX: enable */ \ - UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \ - (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \ - sei(); \ - } while(0) -#else -# error "USART configuration is needed." +# ifdef __AVR_ATmega32U4__ +# define SERIAL_UART_BAUD 9600 +# define SERIAL_UART_DATA UDR1 +# define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) +# define SERIAL_UART_RXD_VECT USART1_RX_vect +# define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) +# define SERIAL_UART_INIT() do { \ + /* baud rate */ \ + UBRR1L = SERIAL_UART_UBRR; \ + /* baud rate */ \ + UBRR1H = SERIAL_UART_UBRR >> 8; \ + /* enable TX */ \ + UCSR1B = _BV(TXEN1); \ + /* 8-bit data */ \ + UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ + sei(); \ + } while(0) +# else +# error "USART configuration is needed." #endif - // I'm fairly sure these aren't needed, but oh well - Jack /* @@ -113,4 +117,3 @@ #endif #endif - |