diff options
Diffstat (limited to 'protocol/iwrap/main.c')
| -rw-r--r-- | protocol/iwrap/main.c | 378 |
1 files changed, 378 insertions, 0 deletions
diff --git a/protocol/iwrap/main.c b/protocol/iwrap/main.c new file mode 100644 index 0000000000..a552afb67e --- /dev/null +++ b/protocol/iwrap/main.c @@ -0,0 +1,378 @@ +/* +Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include <avr/interrupt.h> +#include <avr/io.h> +//#include <avr/wdt.h> +#include "wd.h" // in order to use watchdog in interrupt mode +#include <avr/sleep.h> +#include <util/delay.h> +#include <avr/power.h> +#include "keyboard.h" +#include "matrix.h" +#include "host.h" +#include "iwrap.h" +#ifdef HOST_VUSB +# include "vusb.h" +# include "usbdrv.h" +#endif +#include "uart.h" +#include "suart.h" +#include "timer.h" +#include "debug.h" +#include "usb_keycodes.h" +#include "command.h" + + +static void sleep(uint8_t term); +static bool console(void); +static uint8_t console_command(uint8_t c); +static uint8_t key2asc(uint8_t key); + + +/* +static void set_prr(void) +{ + power_adc_disable(); + power_spi_disable(); + power_twi_disable(); +#ifndef TIMER_H + //power_timer0_disable(); // used in timer.c +#endif + power_timer1_disable(); + power_timer2_disable(); +} +*/ + +/* +static void pullup_pins(void) +{ + // DDRs are set to 0(input) by default. +#ifdef PORTA + PORTA = 0xFF; +#endif + PORTB = 0xFF; + PORTC = 0xFF; + PORTD = 0xFF; +#ifdef PORTE + PORTE = 0xFF; +#endif +#ifdef PORTE + PORTF = 0xFF; +#endif +} +*/ + + +#ifdef HOST_VUSB +static void disable_vusb(void) +{ + // disable interrupt & disconnect to prevent host from enumerating + USB_INTR_ENABLE &= ~(1 << USB_INTR_ENABLE_BIT); + usbDeviceDisconnect(); +} + +static void enable_vusb(void) +{ + USB_INTR_ENABLE |= (1 << USB_INTR_ENABLE_BIT); + usbDeviceConnect(); +} + +static void init_vusb(void) +{ + uint8_t i = 0; + + usbInit(); + disable_vusb(); + /* fake USB disconnect for > 250 ms */ + while(--i){ + _delay_ms(1); + } + enable_vusb(); +} +#endif + +void change_driver(host_driver_t *driver) +{ + host_clear_keyboard_report(); + host_swap_keyboard_report(); + host_clear_keyboard_report(); + host_send_keyboard_report(); + _delay_ms(1000); + host_set_driver(driver); +} + + +static bool sleeping = false; +static bool insomniac = false; // TODO: should be false for power saving +static uint16_t last_timer = 0; + +int main(void) +{ + MCUSR = 0; + clock_prescale_set(clock_div_1); + WD_SET(WD_OFF); + + // power saving: the result is worse than nothing... why? + //pullup_pins(); + //set_prr(); + + print_enable = true; + debug_enable = false; + +#ifdef HOST_VUSB + disable_vusb(); +#endif + uart_init(115200); + keyboard_init(); + print("\nSend BREAK for UART Console Commands.\n"); + + // TODO: move to iWRAP/suart file + print("suart init\n"); + // suart init + // PC4: Tx Output IDLE(Hi) + PORTC |= (1<<4); + DDRC |= (1<<4); + // PC5: Rx Input(pull-up) + PORTC |= (1<<5); + DDRC &= ~(1<<5); + // suart receive interrut(PC5/PCINT13) + PCMSK1 = 0b00100000; + PCICR = 0b00000010; + + host_set_driver(iwrap_driver()); + + print("iwrap_init()\n"); + iwrap_init(); + iwrap_call(); + + last_timer = timer_read(); + while (true) { +#ifdef HOST_VUSB + if (host_get_driver() == vusb_driver()) + usbPoll(); +#endif + keyboard_proc(); +#ifdef HOST_VUSB + if (host_get_driver() == vusb_driver()) + vusb_transfer_keyboard(); +#endif + if (matrix_is_modified() || console()) { + last_timer = timer_read(); + sleeping = false; + } else if (!sleeping && timer_elapsed(last_timer) > 4000) { + sleeping = true; + iwrap_check_connection(); + } + + if (host_get_driver() == iwrap_driver()) { + if (sleeping && !insomniac) { + _delay_ms(1); // wait for UART to send + iwrap_sleep(); + sleep(WDTO_60MS); + } + } + } +} + +static void sleep(uint8_t term) +{ + WD_SET(WD_IRQ, term); + + cli(); + set_sleep_mode(SLEEP_MODE_PWR_DOWN); + sleep_enable(); + sleep_bod_disable(); + sei(); + sleep_cpu(); + sleep_disable(); + + WD_SET(WD_OFF); +} + +ISR(WDT_vect) +{ + // wake up +} + +static bool console(void) +{ + // Send to Bluetoot module WT12 + static bool breaked = false; + if (!uart_available()) + return false; + else { + uint8_t c; + c = uart_getchar(); + uart_putchar(c); + switch (c) { + case 0x00: // BREAK signal + if (!breaked) { + print("break(? for help): "); + breaked = true; + } + break; + case '\r': + uart_putchar('\n'); + iwrap_buf_send(); + break; + case '\b': + iwrap_buf_del(); + break; + default: + if (breaked) { + print("\n"); + console_command(c); + breaked = false; + } else { + iwrap_buf_add(c); + } + break; + } + return true; + } +} + +uint8_t command_extra() +{ + return console_command(key2asc(host_get_first_key())); +} + +static uint8_t console_command(uint8_t c) +{ + switch (c) { + case 'h': + case '?': + print("\nCommands for Bluetooth(WT12/iWRAP):\n"); + print("r: reset. software reset by watchdog\n"); + print("i: insomniac. prevent KB from sleeping\n"); + print("c: iwrap_call. CALL for BT connection.\n"); +#ifdef HOST_VUSB + print("u: USB mode. switch to USB.\n"); + print("w: BT mode. switch to Bluetooth.\n"); +#endif + print("k: kill first connection.\n"); + print("Del: unpair first pairing.\n"); + print("\n"); + return 0; + case 'r': + print("reset\n"); + WD_AVR_RESET(); + return 1; + case 'i': + insomniac = !insomniac; + if (insomniac) + print("insomniac\n"); + else + print("not insomniac\n"); + return 1; + case 'c': + print("iwrap_call()\n"); + iwrap_call(); + return 1; +#ifdef HOST_VUSB + case 'u': + print("USB mode\n"); + init_vusb(); + change_driver(vusb_driver()); + //iwrap_kill(); + //iwrap_sleep(); + // disable suart receive interrut(PC5/PCINT13) + PCMSK1 &= ~(0b00100000); + PCICR &= ~(0b00000010); + return 1; + case 'w': + print("iWRAP mode\n"); + change_driver(iwrap_driver()); + disable_vusb(); + // enable suart receive interrut(PC5/PCINT13) + PCMSK1 |= 0b00100000; + PCICR |= 0b00000010; + return 1; +#endif + case 'k': + print("kill\n"); + iwrap_kill(); + return 1; + case 0x7F: // DELETE + print("unpair\n"); + iwrap_unpair(); + return 1; + } + return 0; +} + +// convert keycode into ascii charactor +static uint8_t key2asc(uint8_t key) +{ + switch (key) { + case KB_A: return 'a'; + case KB_B: return 'b'; + case KB_C: return 'c'; + case KB_D: return 'd'; + case KB_E: return 'e'; + case KB_F: return 'f'; + case KB_G: return 'g'; + case KB_H: return 'h'; + case KB_I: return 'i'; + case KB_J: return 'j'; + case KB_K: return 'k'; + case KB_L: return 'l'; + case KB_M: return 'm'; + case KB_N: return 'n'; + case KB_O: return 'o'; + case KB_P: return 'p'; + case KB_Q: return 'q'; + case KB_R: return 'r'; + case KB_S: return 's'; + case KB_T: return 't'; + case KB_U: return 'u'; + case KB_V: return 'v'; + case KB_W: return 'w'; + case KB_X: return 'x'; + case KB_Y: return 'y'; + case KB_Z: return 'z'; + case KB_1: return '1'; + case KB_2: return '2'; + case KB_3: return '3'; + case KB_4: return '4'; + case KB_5: return '5'; + case KB_6: return '6'; + case KB_7: return '7'; + case KB_8: return '8'; + case KB_9: return '9'; + case KB_0: return '0'; + case KB_ENTER: return '\n'; + case KB_ESCAPE: return 0x1B; + case KB_BSPACE: return '\b'; + case KB_TAB: return '\t'; + case KB_SPACE: return ' '; + case KB_MINUS: return '-'; + case KB_EQUAL: return '='; + case KB_LBRACKET: return '['; + case KB_RBRACKET: return ']'; + case KB_BSLASH: return '\\'; + case KB_NONUS_HASH: return '\\'; + case KB_SCOLON: return ';'; + case KB_QUOTE: return '\''; + case KB_GRAVE: return '`'; + case KB_COMMA: return ','; + case KB_DOT: return '.'; + case KB_SLASH: return '/'; + default: return 0x00; + } +} |