diff options
Diffstat (limited to 'keyboards')
-rw-r--r-- | keyboards/adpenrose/obi/config.h | 68 | ||||
-rw-r--r-- | keyboards/adpenrose/obi/info.json | 70 | ||||
-rw-r--r-- | keyboards/adpenrose/obi/keymaps/default/keymap.c | 41 | ||||
-rw-r--r-- | keyboards/adpenrose/obi/keymaps/default/rules.mk | 1 | ||||
-rw-r--r-- | keyboards/adpenrose/obi/keymaps/via/keymap.c | 41 | ||||
-rw-r--r-- | keyboards/adpenrose/obi/keymaps/via/rules.mk | 3 | ||||
-rw-r--r-- | keyboards/adpenrose/obi/obi.c | 5 | ||||
-rw-r--r-- | keyboards/adpenrose/obi/obi.h | 26 | ||||
-rw-r--r-- | keyboards/adpenrose/obi/readme.md | 29 | ||||
-rw-r--r-- | keyboards/adpenrose/obi/rules.mk | 19 |
10 files changed, 303 insertions, 0 deletions
diff --git a/keyboards/adpenrose/obi/config.h b/keyboards/adpenrose/obi/config.h new file mode 100644 index 0000000000..c1c5ea9f30 --- /dev/null +++ b/keyboards/adpenrose/obi/config.h @@ -0,0 +1,68 @@ +// Copyright 2022 Arturo Avila (@ADPenrose) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "config_common.h" + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { F4, F5, C7, C6 } +#define MATRIX_COL_PINS { F6, B7, B6, B4, B5, D6, D5, D3, D7, D4, D2, D1, D0, B0 } + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/*Rotary encoder - set the resolution fitting your encoder. +Most will need a value of 4. If 1 encoder click results in 2 keycodes sent +increase the value. If you need 2 clicks for 1 keycode, decrease*/ +#define ENCODER_RESOLUTION 4 +#define ENCODERS_PAD_A { F1 } +#define ENCODERS_PAD_B { F0 } +#define TAP_CODE_DELAY 10 + +/* Underglow options: */ +#define RGB_DI_PIN F7 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 16 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 + diff --git a/keyboards/adpenrose/obi/info.json b/keyboards/adpenrose/obi/info.json new file mode 100644 index 0000000000..b1afa0bc0d --- /dev/null +++ b/keyboards/adpenrose/obi/info.json @@ -0,0 +1,70 @@ +{ + "manufacturer": "ADPenrose", + "keyboard_name": "Obi", + "maintainer": "Arturo Avila", + "usb": { + "device_version": "1.0.0", + "pid": "0x0002", + "vid": "0x4450" + }, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Tab", "x":1.25, "y":0, "w":1.5}, + {"label":"Q", "x":2.75, "y":0}, + {"label":"W", "x":3.75, "y":0}, + {"label":"E", "x":4.75, "y":0}, + {"label":"R", "x":5.75, "y":0}, + {"label":"T", "x":6.75, "y":0}, + {"label":"Y", "x":7.75, "y":0}, + {"label":"U", "x":8.75, "y":0}, + {"label":"I", "x":9.75, "y":0}, + {"label":"O", "x":10.75, "y":0}, + {"label":"P", "x":11.75, "y":0}, + {"label":"{", "x":12.75, "y":0}, + {"label":"Backspace", "x":13.75, "y":0, "w":1.5}, + + {"label":"F2", "x":0, "y":1}, + {"label":"Caps Lock", "x":1.25, "y":1, "w":1.75}, + {"label":"A", "x":3, "y":1}, + {"label":"S", "x":4, "y":1}, + {"label":"D", "x":5, "y":1}, + {"label":"F", "x":6, "y":1}, + {"label":"G", "x":7, "y":1}, + {"label":"H", "x":8, "y":1}, + {"label":"J", "x":9, "y":1}, + {"label":"K", "x":10, "y":1}, + {"label":"L", "x":11, "y":1}, + {"label":":", "x":12, "y":1}, + {"label":"Enter", "x":13, "y":1, "w":2.25}, + + {"label":"F3", "x":0, "y":2}, + {"label":"Shift", "x":1.25, "y":2, "w":2.25}, + {"label":"Z", "x":3.5, "y":2}, + {"label":"X", "x":4.5, "y":2}, + {"label":"C", "x":5.5, "y":2}, + {"label":"V", "x":6.5, "y":2}, + {"label":"B", "x":7.5, "y":2}, + {"label":"N", "x":8.5, "y":2}, + {"label":"M", "x":9.5, "y":2}, + {"label":"<", "x":10.5, "y":2}, + {"label":"Shift", "x":11.5, "y":2, "w":1.75}, + {"label":"Up", "x":13.25, "y":2}, + {"label":"?", "x":14.25, "y":2}, + + {"label":"F4", "x":0, "y":3}, + {"label":"Ctrl", "x":1.25, "y":3, "w":1.25}, + {"label":"Win", "x":2.5, "y":3}, + {"label":"Alt", "x":3.5, "y":3, "w":1.25}, + {"label":"Spacebar", "x":4.75, "y":3, "w":2.25}, + {"label":"Spacebar", "x":7, "y":3, "w":1.25}, + {"label":"Spacebar", "x":8.25, "y":3, "w":2.75}, + {"label":"Alt", "x":11, "y":3, "w":1.25}, + {"label":"Left", "x":12.25, "y":3}, + {"label":"Down", "x":13.25, "y":3}, + {"label":"Right", "x":14.25, "y":3} + ] + } + } +} diff --git a/keyboards/adpenrose/obi/keymaps/default/keymap.c b/keyboards/adpenrose/obi/keymaps/default/keymap.c new file mode 100644 index 0000000000..6d55dc73fb --- /dev/null +++ b/keyboards/adpenrose/obi/keymaps/default/keymap.c @@ -0,0 +1,41 @@ +// Copyright 2022 Arturo Avila (@ADPenrose) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [0] = LAYOUT_all( + KC_ESC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC, + KC_MUTE, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_VOLU, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_RSFT, KC_UP, KC_SLSH, + KC_VOLD, KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_RIGHT + ), + [1] = LAYOUT_all( + KC_DEL, KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, KC_BSLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DOT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_RBRC, + KC_TRNS, QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + +#if defined(ENCODER_MAP_ENABLE) +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS) }, + [2] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS) }, + [3] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS) } +}; +#endif diff --git a/keyboards/adpenrose/obi/keymaps/default/rules.mk b/keyboards/adpenrose/obi/keymaps/default/rules.mk new file mode 100644 index 0000000000..ee32568148 --- /dev/null +++ b/keyboards/adpenrose/obi/keymaps/default/rules.mk @@ -0,0 +1 @@ +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/adpenrose/obi/keymaps/via/keymap.c b/keyboards/adpenrose/obi/keymaps/via/keymap.c new file mode 100644 index 0000000000..efede949b8 --- /dev/null +++ b/keyboards/adpenrose/obi/keymaps/via/keymap.c @@ -0,0 +1,41 @@ +// Copyright 2022 Arturo Avila (@ADPenrose) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [0] = LAYOUT_all( + KC_ESC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC, + KC_MUTE, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_VOLU, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_RSFT, KC_UP, KC_SLSH, + KC_VOLD, KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_RIGHT + ), + [1] = LAYOUT_all( + KC_DEL, KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, KC_BSLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DOT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_RBRC, + KC_TRNS, QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + +#if defined(ENCODER_MAP_ENABLE) +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = { + [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [1] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS) }, + [2] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS) }, + [3] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS) } +}; +#endif diff --git a/keyboards/adpenrose/obi/keymaps/via/rules.mk b/keyboards/adpenrose/obi/keymaps/via/rules.mk new file mode 100644 index 0000000000..1189f4ad19 --- /dev/null +++ b/keyboards/adpenrose/obi/keymaps/via/rules.mk @@ -0,0 +1,3 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/adpenrose/obi/obi.c b/keyboards/adpenrose/obi/obi.c new file mode 100644 index 0000000000..2efd4eba47 --- /dev/null +++ b/keyboards/adpenrose/obi/obi.c @@ -0,0 +1,5 @@ +// Copyright 2022 Arturo Avila (@ADPenrose) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "obi.h" + diff --git a/keyboards/adpenrose/obi/obi.h b/keyboards/adpenrose/obi/obi.h new file mode 100644 index 0000000000..09bf9b29fc --- /dev/null +++ b/keyboards/adpenrose/obi/obi.h @@ -0,0 +1,26 @@ +// Copyright 2022 Arturo Avila (@ADPenrose) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2C, K2D, \ + K30, K31, K32, K33, K35, K36, K37, K3A, K3B, K3C, K3D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, KC_NO, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, KC_NO, K2C, K2D }, \ + { K30, K31, K32, K33, KC_NO, K35, K36, K37, KC_NO, KC_NO, K3A, K3B, K3C, K3D } \ +} diff --git a/keyboards/adpenrose/obi/readme.md b/keyboards/adpenrose/obi/readme.md new file mode 100644 index 0000000000..59c0b796ae --- /dev/null +++ b/keyboards/adpenrose/obi/readme.md @@ -0,0 +1,29 @@ +# Obi + +![obi](https://i.imgur.com/btQPol1h.png) + +A 40% keyboard inspired by the TMOv2 and Nightmare boards. + +# General info + +* Keyboard Maintainer: [Arturo Avila](https://github.com/ADPenrose) +* Hardware Supported: Obi v1 PCB +* Hardware Availability: [Arturo Avila](https://github.com/ADPenrose) + +Make example for this keyboard (after setting up your build environment): + + make adpenrose/obi:default + +Flashing example for this keyboard: + + make adpenrose/obi:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/adpenrose/obi/rules.mk b/keyboards/adpenrose/obi/rules.mk new file mode 100644 index 0000000000..94ce0d7a66 --- /dev/null +++ b/keyboards/adpenrose/obi/rules.mk @@ -0,0 +1,19 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes # Encoder functionality |